Figures
Abstract
Bacteria were identified associated with biodegradation of aromatic pollutants biphenyl, benzoate, and naphthalene in a long-term polychlorinated biphenyl- and polyaromatic hydrocarbon-contaminated soil. In order to avoid biases of culture-based approaches, stable isotope probing was applied in combination with sequence analysis of 16 S rRNA gene pyrotags amplified from 13C-enriched DNA fractions. Special attention was paid to pyrosequencing data analysis in order to eliminate the errors caused by either generation of amplicons (random errors caused by DNA polymerase, formation of chimeric sequences) or sequencing itself. Therefore, sample DNA was amplified, sequenced, and analyzed along with the DNA of a mock community constructed out of 8 bacterial strains. This warranted that appropriate tools and parameters were chosen for sequence data processing. 13C-labeled metagenomes isolated after the incubation of soil samples with all three studied aromatics were largely dominated by Proteobacteria, namely sequences clustering with the genera Rhodanobacter Burkholderia, Pandoraea, Dyella as well as some Rudaea- and Skermanella-related ones. Pseudomonads were mostly labeled by 13C from naphthalene and benzoate. The results of this study show that many biphenyl/benzoate-assimilating bacteria derive carbon also from naphthalene, pointing out broader biodegradation abilities of some soil microbiota. The results also demonstrate that, in addition to traditionally isolated genera of degradative bacteria, yet-to-be cultured bacteria are important players in bioremediation. Overall, the study contributes to our understanding of biodegradation processes in contaminated soil. At the same time our results show the importance of sequencing and analyzing a mock community in order to more correctly process and analyze sequence data.
Citation: Uhlik O, Wald J, Strejcek M, Musilova L, Ridl J, Hroudova M, et al. (2012) Identification of Bacteria Utilizing Biphenyl, Benzoate, and Naphthalene in Long-Term Contaminated Soil. PLoS ONE 7(7): e40653. https://doi.org/10.1371/journal.pone.0040653
Editor: Jack Anthony Gilbert, Argonne National Laboratory, United States of America
Received: April 25, 2012; Accepted: June 11, 2012; Published: July 13, 2012
Copyright: © 2012 Uhlik et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was supported by EU project MINOTAURUS within the 7th Framework Programme (project no: 265946), the Ministry of Education, Youth and Sports of the Czech Republic projects 2B08031 and ME 09024), and Czech Science Foundation (project 525/09/1058). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Wide-spread use, improper handling, and disposal of certain synthetic organic chemicals have resulted in contamination of soils, waters, and sediments. Among the compounds released, biphenyl, polychlorinated biphenyls (PCBs), petroleum chemicals including polycyclic aromatic hydrocarbons (PAHs) and BTEX (benzene, toluene, ethylbenzene and xylenes), pesticides, dioxins, furans, and flame retardants are of major concern [1], [2]. Their presence in the environment often poses a serious risk to both ecosystem functioning and human health. Although anthropogenic activity is a main source of these contaminants, they can as well form during natural events [3]. In addition, some biogenic sources of PAHs have been known, such as endogenic synthesis by microorganisms, phytoplankton, algae, or higher plants [4].
Although biphenyl, PCBs, and PAHs are toxic for many higher organisms, some bacteria are known to transform and/or mineralize these toxicants in the processes of bioremediation [4]–[6]. Under aerobic conditions, bacteria metabolize biphenyl and its monochlorinated derivatives [7], rarely also dichlorinated ones [8], in order to derive carbon and energy. Other lower chlorinated PCB congeners are usually biodegraded cometabolically [9]–[11] with biphenyl being the primary substrate. Degradative enzymes encoded in the bph operon transform (chloro)biphenyl to 2-hydroxypenta-2,4-dienoate and (chloro)benzoate. 2-hydroxypentadienoate is further metabolized into acetylcoenzyme A, which enters the Krebs cycle. (Chloro)benzoate is catabolized into catechol, which is further degraded into central intermediates [9].
The simplest PAH, naphthalene, along with some 3- and 4-ring PAHs act as growth substrates for aerobic bacteria [12]. Higher PAHs are usually biodegraded cometabolically and their biotransformation yields no carbon or energy [13]. The upper catabolic pathway for naphthalene degradation consists of six steps with salicylic acid being the final product. Salicylic acid is further metabolized via catechol or gentisic acid by so called lower pathway of naphthalene degradation. In many cases, the same enzymes can transform not only naphthalene but also phenanthrene and anthracene [12].
In order to understand natural biodegradative processes in contaminated environments, it is crucial to identify bacteria involved in pollutants metabolism. Most of our knowledge on biodegradative processes in soil has still been based on highly biased results of cultivation studies. Stable isotope probing (SIP) [14], in contrast, enables researchers to link metabolic activity and phylogeny without previous cultivation of microbes. Therefore, SIP is considered one of the leading molecular tools for investigating the diversity of bacteria potentially responsible for ecologically relevant processes. Applying this method first helped describe the utilization of one-carbon compounds [e.g. 14–16] and has since been used to detect microbial communities active in the utilization of a wide variety of compounds, including xenobiotics [reviewed by 17,18]. Huge progress in application of SIP has been made as a result of its combination with high-throughput sequencing [19]. For the purposes of bacterial identification, the most informative approach appears to be pyrosequencing of 16 S rRNA tag-encoded amplicons. Recently, combination of SIP with sequence analysis of 16 S rRNA gene pyrotags has been used to probe populations associated with rapid response to soil rewetting [20], nitrification [21], nitrogen incorporation in petroleum-contaminated arctic soils [22], earthworm-mediated shaping of communities [23], toluene degradation at a tar-oil-contaminated aquifer [24], or biphenyl-oxidation in a tidal mudflat [25]. At the same time, bottlenecks of this approach have been realized which are associated especially with the noise introduced during amplification and pyrosequencing leading to an overestimation of diversity [26]. Such a realization has resulted in the introduction of several denoising algorithms or improved operational taxonomic unit (OTU) clustering [27]–[30] in order to increase data analysis exactness.
The aim of the presented study was to identify bacterial populations in contaminated soil that derive carbon from biphenyl, naphthalene, and benzoate. In order to reach this goal, we applied DNA-based stable isotope probing with subsequent pyrosequencing of 16 S rRNA gene tag-encoded amplicons. Sequence data were analyzed along with a mock community comprised of known strains in order to determine appropriate parameters for sequence data processing. Results of the study help unveil which bacteria are potentially involved in biodegradation of aromatic pollutants. In addition, the experimental design with labeled substrates as well as key intermediates of degradation pathways (biphenyl and benzoate, respectively) helps clarify the flow of carbon in the contaminated soil. The experimental design also has another advantage that it can detect abilities of strains to biodegrade multiple contaminants.
Results
Stable Isotope Probing of DNA
Microcosms constructed with contaminated soil and amended with 13C-labeled biphenyl, benzoate, or naphthalene were destructively harvested after 4 and 14 days of incubation. Majority of unlabeled DNA occurred at buoyant density of around 1.6 g.mL–1. Labeled DNA was localized in fractions with buoyant densities 1.623–1.673 g.mL–1 as is indicated by comparing the distribution of 16 S rRNA genes in gradient fractions of unlabeled control and 13C-DNA. These fractions were compiled and further analyzed as 13C-DNA (“heavy” DNA). One of the major issues associated with stable isotope probing is to control for background 12C-DNA contamination in the heavy-DNA-containing fractions. To cope with this phenomenon, fractions of unlabeled control with buoyant densities of 1.623–1.673 g.mL–1 were compiled and further analyzed along with the samples. The sequences from all samples that were ≥99% identical to those of unlabeled control were subtracted from analysis as they were considered background 12C-DNA contamination.
Distributions of 16 S rRNA genes in gradient fractions indicate that in case of biphenyl significant labeling was achieved on day 14, whereas on day 4 DNA was not labeled enough to be distinguished from the unlabeled control (the curves have almost the same behavior). Incubation time of 4 days, however, was sufficient for cells to derive carbon from 13C-labeled benzoate and naphthalene (Figure S1).
Identification of Bacteria
The majority of 16 S rRNA gene sequences retrieved from the contaminated soil clustered with Proteobacteria and Acidobacteria – together these two phyla represented two thirds of the sequences (Figure 1). Sequences of the phylum Proteobacteria were also the predominant ones retrieved from 13C-DNA. 13C-DNA obtained after a 4-day incubation with 13C-biphenyl contained less than 25% of valid sequences (Table 1). This was caused by subtracting the majority of sequences that were also detected in the unlabeled control. Such a small number of sequences was expected based on data obtained from qPCR (Figure S1), which suggested there was not enough DNA labeling on day 4. Analyzing 13C-DNA isolated after 14-day incubation of the soil with biphenyl showed that carbon from biphenyl has been mainly utilized by the genera Rhodanobacter and Burkholderia (38% of all sequences) (Table 2). The major OTU identified as Rhodanobacter was most likely associated with R. spathiphylli as determined by RDP Seqmatch. In addition to Rhodanobacter, other Gammaproteobacteria from the family Xanthomonadaceae have been detected, including Dyella and Rudaea-related populations. Betaproteobacteria were represented in addition to Burkholderia by Pandoraea. Further bacteria included in the top OTUs belonged to Alphaproteobacteria (Table 2). Many of the sequences clustering with major OTUs were not classified at the level of genus, suggesting a possible detection of yet-to-be described bacterial species.
The majority of sequences detected after 13C-benzoate labeling clustered with pseudomonads. This OTU was also detected in 13C-biphenyl labeled DNA on day 14 but was very scarce (0.3% sequences). The second most abundant cluster of sequences after both 4- and 14-day incubation was identical to the Rhodanobacter cluster which dominated carbon acquisition from 13C-biphenyl. Similarly, other populations were detected to derive carbon from benzoate as well as biphenyl, including those associated with Burkholderia, Pandoraea, or Rudaea-like and Skermanella-like Proteobacteria, and some Acidobacteria (Table 2, Table S1). In addition, carbon from 13C-benzoate was acquired by populations of Azotobacter (3% and 6% sequences on day 4 and 14, respectively) and Gram-positive bacilli (2% and 7% sequences on day 4 and 14, respectively) (Table 2).
Sequences detected in 13C-DNA isolated from 13C-naphthalene-amended microcosms were also largely predominated by pseudomonads. Their predominance is especially obvious on day 4. On day 14, the peak representing heavy DNA was much smaller compared to day 4 (Figure S1) and also many sequences detected in heavy DNA on day 14 were classified as 12C-background (Table 1). The major cluster of pseudomonads corresponds to the major ones detected in benzoate-amended microcosms, i.e. identical populations of pseudomonads seem to acquire carbon from both, benzoate and naphthalene. Many other sequences detected in 13C-DNA after naphthalene labeling were identical to those detected after biphenyl and benzoate labeling, including Rhodanobacter, Burkholderia, Pandoraea, Dyella as well as many OTUs not classified at the level of genus. These populations thus seem to play a key role in intrinsic bioremediation of a wider variety of aromatic contaminants in the soil.
Mock Community Analysis
Pyrosequencing of 16 S rRNA genes of 8 strains included in our mock community was performed in order to (i) analyze the accuracy and efficiency of the amplification and sequencing strategy and (ii) determine appropriate parameters for sequence data processing. A mock community was constructed with strains from phyla Proteobacteria, Actinobacteria and Firmicutes (Table 3). Members of these phyla are most commonly associated with the degradation of aromatics. From over 40,000 reads obtained by pyrosequencing, a random subset of 1,000 and 10,000 sequences was chosen which was further used as a testing set for determining the appropriate analysis procedures. Details of the analysis performed in mothur software package, version 1.25 [31] are described in Material and methods section.
The number of OTUs (defined at 3% distance) detected in the subset differed depending on the program used to detect and remove putative chimeric sequences. Using UCHIME [32] for checking chimeras, the processing resulted in 19 OTUs (defined at 3% distance) whereas using Perseus [29], the final number of OTUs was reduced to 13. The same trend was obvious when a subset of 10,000 reads of mock community were analyzed – using UCHIME and Perseus, the total number of OTUs was 64 and 41. After OTUs represented by 3 or less sequences were subtracted, the numbers of OTUs were reduced to 14 and 8, respectively. Applying Perseus, therefore, resulted in the expected number of OTUs (i.e. 8) after the exclusion of tripletons, doubletons, and singletons. After normalizing sequence data, the spurious OTUs were restricted to singletons only (Table S1).
Other algorithms for chimera checking, such as Bellerophon [33] or B2C2 [34], which is a stand-alone software not implemented in mothur, had a worse performance than both Perseus and UCHIME (data not shown). Therefore, sequence data were processed according to commands described in Table S2 with the use of Perseus for identifying chimeric sequences.
Discussion
In order to better understand, optimize and/or monitor bioremediation processes, a fundamental goal has been to identify bacteria involved in biodegradation of pollutants. The aim of this study was to investigate which bacterial populations participate in biphenyl, benzoate, and naphthalene biodegradation in real long term contaminated soil. This soil represents a unique ecosystem since it was gradually contaminated for 30 years and it has been deposited at the present location for 15 years [35]. Such a long time should have been sufficient for the establishment of stable microbial populations. Cultivation-based techniques highly underestimate diversity as only 1% of microbes are routinely cultivated under laboratory conditions [36], [37]. Linking contaminant transformation to phylogenetic identity of active microbes without cultivation has thus become the main challenge. SIP is one of the available methods of functional molecular microbial ecology which can meet this challenge [38]. In this study, SIP was combined with pyrosequencing of 16 S rRNA gene amplicons. Such an approach should warrant diversity analysis in sufficient depth.
The results of stable isotope probing experiments show that biotransformation of aromatic pollutants in this soil is mainly mediated by Proteobacteria There were populations detected that derived carbon from both labeled biphenyl and benzoate, including Rhodanobacter, Burkholderia, Pandoraea, Dyella, as well as Rudaea- and Skermanella-related bacteria. As a sufficient amount of labeled DNA was not achieved on day 4 compared to unlabeled control, the question remains whether 13C from biphenyl was derived either directly by biphenyl degradation or indirectly via cross-feeding (possibly with benzoate as a substrate). If the latter was the case, one would expect similar distribution of sequences in 13C-DNA isolated after the incubation with both labeled biphenyl and benzoate. However, the richest clusters in 13C-DNA after labeling with benzoate were associated with pseudomonads (Table 2) whereas in 13C-DNA after labeling with biphenyl, pseudomonads were much poorer in abundance (Table S1). Therefore, it seems to be more likely that the populations detected are capable of transforming biphenyl via benzoate into compounds of intermediary metabolism. This may as well be supported by previous reports showing that members of majority of these genera isolated in pure cultures are capable of degrading biphenyl via benzoate to Krebs cycle intermediates. These include some of the model PCB degrading strains Burkholderia xenovorans LB400 [39], [40] or Pandoraea pnomenusa (formerly Comamonas testosteroni) B-356 [41], [42]. Recently also the closest type strain to the Dyella cluster, D. ginsengisoli, has been described to degrade biphenyl [43]. The question remained whether such populations can be metabolically active directly in the soil, which has been confirmed by our results. In previous SIP experiments, however, only Burkholderia members were found to be actively deriving carbon from biphenyl [44] and benzoate [45], [46] in soils. All other dominant populations acquiring carbon from biphenyl and benzoate directly in this soil are reported here for the first time. In addition, based on cultivation studies Rhodanobacter members were previously associated only with the degradation of PAHs [47], chlorobenzoates [48], or certain pesticides [49]. This paper, to the best of our knowledge, is the first one to report bacteria clustering with Rhodanobacter spp. to derive carbon from biphenyl. However, there have been studies published detecting Rhodanobacter spp. in total community DNA isolated from PCB-contaminated soils [50], [51].
Pseudomonads, which have been reported to be the most prevailing group of bacteria to degrade complex organic compounds [52], largely dominated carbon acquisition from labeled benzoate and naphthalene in this study. A much lower number of sequences associated with this genus were detected to have derived carbon from biphenyl. Many strains belonging to pseudomonads had been reported to degrade biphenyl and PCBs [53]–[56], PAHs [12], or other aromatic contaminants. Pseudomonas spp. were also detected in other SIP experiments to utilize (i) naphthalene in PAH-contaminated soil [57]–[59], aquifer [60], and an aerobic bioreactor used to treat contaminated soil [61]; (ii) benzoate in soil [46]; and (iii) biphenyl in PCB-contaminated river sediment [62] or soil [63]. Major OTUs detected in 13C-DNAs were also largely detected in the total community DNA (Figure 1). In addition, the OTU associated with Rhodanobacter spathiphylli was the most abundant taxon of all (Table S1). Therefore, these populations do not seem to be just opportunistic growers taking advantage of external substrates they were provided with during SIP but are rather regular abundant members in this contaminated soil adapted for the biodegradation of the pollutants.
Other metabolically active Proteobacteria included Azotobacter, Sphingomonas, and unclassified Rhodospirillaceae, whose sequences were retrieved from 13C-DNA isolated after incubation with 13C-labeled benzoate only, or benzoate and naphthalene, or all three studied compounds, respectively. A relatively large proportion of sequences retrieved from 13C-DNA were not classified at the level of genus. These can be either sequences of bacteria with no cultured and studied representatives or chimeric sequences that were not removed by Perseus. The fact the same OTUs are often present in more samples (Table 2) suggests the former to be much more likely.
In addition to Proteobacteria, bacteria lineages of Gemmatimonadetes, Acidobacteria, and Gram-positive bacilli were detected to derive carbon from some of the labeled aromatics. Ability to degrade several organic pollutants have already been demonstrated for genera Azotobacter, Sphingomonas, Bacillus, and Gemmatimonas [64]–[67], with Bacillus and Sphingomonas being detected by SIP experiments as a benzoate [46] and biphenyl and pyrene [63], [68], [69] utilizers, respectively.
Contaminated soil from the locality of Lhenice has been subjected to certain phyto/rhizoremediation studies previously, including isolation of biphenyl (and potentially PCB) degrading bacteria. Only isolates of the genus Achromobacter, however, were identified in this study to be metabolically active in biphenyl biotransformation (Table S1, OTU 64) and were previously obtained in pure culture [70]. Although Ionescu et al. [71] isolated a Burkholderia member, the identification was based on biochemical characteristics; 16 S rRNA sequencing showed this strain to cluster with the genus Achromobacter [35]. In addition, a time-course stable isotope probing experiment was conducted with the soil from this locality detecting Hydrogenophaga and Paenibacillus as dominant biphenyl-metabolizing genera. Yet the microcosms were constructed by converting the soil into slurry and enriching biphenyl utilizers prior to stable isotope probing [50]. These factors can create favorable conditions for different microbial populations, which we avoided in this study. This is in agreement with results of another study [25], in which Paenibacillus sequences were also found to dominate 13C-biphenyl-labeled DNA in tidal mudflat.
It was previously highlighted that pyrosequencing of amplicons can overestimate microbial diversity and the datasets need qualified processing before any conclusions are made [26]. This can be performed, for instance, through denoising pyrosequencing amplicon reads by exploiting rank-abundance distributions [28], through denoising flowgrams before these are converted to sequences [29], [30], or through improved OTU clustering [27]. Many of these studies also highlight the need to remove chimeric sequences in order to accurately estimate the diversity of a sample. In our study, we applied the mock community analysis-based approach for optimization of data processing in mothur software package (Table S2). Our data processing was based on standardized operating procedure defined for the needs of Human Microbiome Project [72], which uses UCHIME to identify chimeric sequences. Based on our mock community processing Perseus performed even better. Therefore, it was applied when processing sequence data.
Overall, our data show that biotransformation of selected aromatics was mainly performed by the same populations of Proteobacteria. Stable isotope probing combined with ultra-deep sequencing is shown here to be a helpful tool to monitor natural attenuation and investigate bioremediation potential. Results obtained within this study bring insight into the identity of bacteria actively metabolizing contaminants in soil. It points out broader biodegradation abilities of some soil microbiota, which can be further employed in bioremediation of sites with mixed organic contaminants. Many of the metabolically active populations are as-yet uncultured and unclassified bacteria. Therefore, this study shows the importance of cultivation-independent techniques to investigate biodegradation processes. At the same time our results show the importance of sequencing and analyzing a mock community in order to more correctly process and analyze sequence data.
Materials and Methods
SIP Microcosms
The source of soil samples was a dumpsite of contaminated soil in Lhenice, south Bohemia, Czech Republic [73]. The soil originated from a tarmacadam-producing plant in Milevsko, South Bohemia, where it was gradually contaminated from 1960s till 1990. In 1996, the soil was transferred and deposited at the present location. The main contaminants are PCBs. Their total amounts have decreased over the years by natural attenuation, from the firstly determined concentration of 470 µg PCBs/g soil in 1999 [35] to about 100 µg PCBs/g soil in 2008. The sum of PCBs was based solely on indicator congeners so the actual numbers of all congeners are even higher. In addition to PCBs, the soil contains biphenyl, PAHs, pesticides (DDT, traces of hexachlorbenzene and lindane), and heavy metals (Table 4).
The soil samples for the experiment were collected from the depth of about 0.5 m in the late summer of 2008. After coarse-sieving and homogenization, a subsample of 60 g was fine-sieved and transferred on a slide of filter-paper in a box with a perforated bottom. The box was closed and inserted into another box with water on the bottom so that the soil was not in contact with the liquid. In such arrangement, the soil was left to moisturize for 3 days in order to increase bacterial activity. SIP microcosms were set in 100 mL serum bottles (Sigma-Aldrich, USA) in triplicates, each containing 2.5 g soil. 13C-labeled biphenyl and naphthalene (Sigma-Aldrich, USA) were dissolved in acetone (concentration 50 mg.mL–1), and 10 µL of the solutions were applied onto the inner walls of empty serum bottles. The soil was added after acetone was completely evaporated leaving behind crystals of the substrates. Subsequently, the soil was moisturized with 500 µL of mineral salt solution [50]. Bottles were sealed with crimp seals with silicone septa to maintain stable atmosphere with continuous evaporation of the substrates at the beginning of the incubation. 13C-labeled benzoate (Sigma-Aldrich, USA) was applied directly in mineral salt solution (500 µL, concentration 1 mg/mL) onto the soil. Microcosms were destructively harvested by freezing (−80°C) after 4 and 14 days of incubation at 20°C. In order to minimize a possible influence of soil heterogeneity, triplicate SIP microcosms were set for each substrate and each time point. After the incubation period, triplicate samples were pooled for downstream processes to recover 13C-DNA from all three replicates at the same time.
13C-DNA Isolation
DNA was extracted with a PowerMax Soil DNA Isolation Kit (MoBio Laboratories Inc., USA) using the standard protocol. After final elution, DNA was concentrated by ethanol precipitation with glycogen (Roche, Germany) as described previously [50]. Pellets were dissolved in 50 µL of molecular biology water (Sigma-Aldrich, USA), and samples were diluted to a concentration of 100 ng.µL–1. In 2 mL centrifugation cuvettes, 8 µL of DNA solution (800 ng DNA) was mixed with cesium trifluoroacetate (Amersham, UK) adjusted to a density of 1.6 g.mL–1. Isopycnic centrifugation was performed on a Discovery 90 Ultracentrifuge using TFT-80.2 Fixed-Angle Ultraspeed Centrifuge Rotor (Sorvall, USA) at conditions of 145,000×g for 70 hours in 2 mL cuvettes. Using a Beckman Fraction Recovery System (Beckman Coulter, USA) and Harvard Pump 11 Plus Single Syringe (Harvard Apparatus, USA), each gradient was fractionated into 50 µL fractions (with flow rate 200 µL.min−1). Buoyant density of each fraction was determined based on refractive index of fractionated blanks (water was used instead of DNA) measured with Digital Handheld Refractometer (Reichert Analytical Instruments, USA). DNA from fractions with buoyant densities of 1.559–1.697 g.mL–1 was retrieved by isopropanol precipitation with glycogen [50]. Quantification of 16 S rRNA genes in these fractions was carried out using real-time qPCR in relation to a standard curve constructed with Pseudomonas stutzeri JM300 genomic DNA, which contains 213,000 16 S rRNA gene copies per ng of genomic DNA [74]. PCR conditions were as follows: each 12 µL reaction contained 1× DyNAmo Flash SYBR Green qPCR Mastermix (Finnzymes, Finland), 4 pmol of each primer 786f, 5′-GATTAGATACCCTGGTAG-3′, and 939r, 5′-CTTGTGCGGGCCCCCGTCAATTC-3′ [75], and 2 µL of template DNA from each fraction. Cycling program was set to 95°C for 5 min, 35 cycles of 95°C for 20 s, 55°C for 30 s, 72°C for 30 s, and a final extension at 72°C for 10 min. Each measurement was performed in duplicates.
Amplicon Preparation and Pyrosequencing
Regions V4–V5 of 16 S rRNA genes were amplified with primers (numbering according to E. coli [J01695] positioning) f563–577, 5′-AYTGGGYDTAAAGNG-3′, and r926–909, 5′-CCGTCAATTCMTTTRAGT-3′ (www.rdp.cme.msu.edu) [76]. Each of the primers was synthesized together with sequencing adapters (454 Sequencing Application Brief No. 001-2009, Roche), and the forward primer was also modified with different tags (454 Sequencing Technical Bulletin No. 005-2009, Roche) so that more samples could be pooled and sequenced at once.
The PCR mixture was prepared in 12.5 µL volumes containing FastStart High Fidelity Reaction Buffer (Roche, Germany), 2.5 nmol of dNTPs, 2.5 pmol of each primer (Generi Biotech, Czech Republic), 1.125 µg bovine serum albumin (New England BioLabs, Great Britain), 0.625 U of FastStart High Fidelity PCR System Enzyme Blend (Roche Diagnostics) and template DNA (5–50 ng). The reaction conditions were as follows: 95°C for 5 min, 35 cycles of 95°C for 20 s, 52°C for 30 s, and 72°C for 60 s with final extension at 72°C for 10 min. Obtained PCR products were used as templates for reconditioning PCR [77] in order to minimize non-specific products. Reconditioning PCR was performed in 50 µL volumes using the same PCR reagent concentrations as described above and 5 µL of template DNA. The cycling conditions were the same except the number of cycles was between 5 and 8. PCR products were purified with a QIAquick PCR purification kit (Qiagen, Germany) and mixed together with other barcoded samples for pyrosequencing. The amplicon pool was purified using AMPure XP Beads (Agencourt, Beckman Coulter, USA) to remove residual primer-dimers according to manufacturer’s instructions. Amplicons were unidirectionally sequenced from the forward primer using GS FLX Titanium chemistry followed by amplicon analysis of signal processing (Roche).
Mock Community as a Control for Pyrosequencing
A mock community was constructed by mixing genomic DNA of eight bacterial strains (Table 3). After the strains were grown overnight in liquid Luria Bertani medium (Oxoid, UK), their genomic DNA was isolated with a PureLink Genomic DNA Mini Kit (Invitrogen, USA). The number of 16 S rRNA gene copies per ng of each genomic DNA was determined by real-time qPCR as described above. Genomic DNA samples of the selected strains were mixed so that the numbers of 16 S rRNA genes from each strain were of the same order of magnitude. Only the amount of Rhodococcus jostii RHA1 16 S rRNA genes was an order of magnitude lower.
Analysis of 16 S rRNA Pyrotags
Raw pyrosequencing data (*.sff files) were processed within mothur software package, version 1.25 [31]. Except some minor modifications, processing was based on standardized operating procedure defined for the needs of Human Microbiome Project [72]. The whole procedure is described in Table S2 and was set this way based on mock community (Table 3) analysis. Sequences in 13C-DNA which were more than 99% identical to those detected in control set (DNA from fractions of unlabeled control corresponding to those where 13C-DNA was detected in samples after probing) were considered contamination and were subtracted from analyses.
Sequences with less than 3% sequence similarity were considered the same operational taxonomic units (OTUs). These were classified by mothur-implemented RDP reference files [78] and the closest type strain was determined by RDP Seqmatch with the representative sequence of each OTU [76].
Supporting Information
Figure S1.
Quantitative PCR-based detection of 13C-DNA in density gradient fractions (average from two independent measurements).
https://doi.org/10.1371/journal.pone.0040653.s001
(TIF)
Table S1.
Clusters (defined at 3% distance) of sequences detected in total community and 13C-DNA after 4- and 14-day incubation of soil with 13C-labeled substrates (biphenyl – Bp, benzoate – Bz, and naphthalene – Np). Numbers of sequences in OTUs are normalized. Identification was performed by mothur-implemented RDP reference files [78].
https://doi.org/10.1371/journal.pone.0040653.s002
(XLSX)
Table S2.
Commands used for pyrosequencing data processing in mothur software package, version 1.25 [31], [72]. The table also summarizes the number of valid and unique sequences from a 10,000-read subset of mock community that passed the selected criteria.
https://doi.org/10.1371/journal.pone.0040653.s003
(DOCX)
Acknowledgments
The authors acknowledge Mary Beth Leigh, Mary-Cathrine Leewis, Qiong Wang, Patrick Schloss and Sarah Westcott for the advice on experimental setup and data analysis.
Author Contributions
Conceived and designed the experiments: OU MM TM. Performed the experiments: JW OU JR MH. Analyzed the data: OU MS LM. Contributed reagents/materials/analysis tools: CV EC. Wrote the paper: OU MS LM MM TM.
References
- 1. Chaudhry Q, Blom-Zandstra M, Gupta S, Joner EJ (2005) Utilising the synergy between plants and rhizosphere microorganisms to enhance breakdown of organic pollutants in the environment. Environ Sci Pollut Res Int 12: 34–48.
- 2. McGuinness M, Dowling D (2009) Plant-associated bacterial degradation of toxic organic compounds in soil. Int J Environ Res Public Health 6: 2226–2247.
- 3. Manoli E, Samara C (1999) Polycyclic aromatic hydrocarbons in natural waters: sources, occurrence and analysis. Trends in Analytical Chemistry 18: 417–428.
- 4. Suess MJ (1976) The environmental load and cycle of polycyclic aromatic hydrocarbons. Science of The Total Environment 6: 239–250.
- 5. Furukawa K, Hayase N, Taira K, Tomizuka N (1989) Molecular relationship of chromosomal genes encoding biphenyl/polychlorinated biphenyl catabolism: some soil bacteria possess a highly conserved bph operon. J Bacteriol 171: 5467–5472.
- 6. Schnoor JL, Licht LA, Mccutcheon SC, Wolfe NL, Carreira LH (1995) Phytoremediation of organic and nutrient contaminants. Environ Sci Technol 29: A318–A323.
- 7. Sylvestre M (1980) Isolation method for bacterial isolates capable of growth on p-chlorobiphenyl. Appl Environ Microbiol 39: 1223–1224.
- 8. Kim S, Picardal F (2001) Microbial growth on dichlorobiphenyls chlorinated on both rings as a sole carbon and energy source. Appl Environ Microbiol 67: 1953–1955.
- 9. Furukawa K (2000) Biochemical and genetic bases of microbial degradation of polychlorinated biphenyls (PCBs). J Gen Appl Microbiol 46: 283–296.
- 10. Pieper DH (2005) Aerobic degradation of polychlorinated biphenyls. Appl Microbiol Biotechnol 67: 170–191.
- 11. Pieper DH, Seeger M (2008) Bacterial metabolism of polychlorinated biphenyls. J Mol Microbiol Biotechnol 15: 121–138.
- 12. Habe H, Omori T (2003) Genetics of polycyclic aromatic hydrocarbon metabolism in diverse aerobic bacteria. Biosci Biotechnol Biochem 67: 225–243.
- 13. Johnsen AR, Wick LY, Harms H (2005) Principles of microbial PAH-degradation in soil. Environmental Pollution 133: 71–84.
- 14. Radajewski S, Ineson P, Parekh NR, Murrell JC (2000) Stable-isotope probing as a tool in microbial ecology. Nature 403: 646–649.
- 15. Hutchens E, Radajewski S, Dumont MG, McDonald IR, Murrell JC (2004) Analysis of methanotrophic bacteria in Movile Cave by stable isotope probing. Environ Microbiol 6: 111–120.
- 16. Radajewski S, Webster G, Reay DS, Morris SA, Ineson P, et al. (2002) Identification of active methylotroph populations in an acidic forest soil by stable-isotope probing. Microbiology 148: 2331–2342.
- 17. Uhlík O, Ječná K, Leigh MB, Macková M, Macek T (2009) DNA-based stable isotope probing: a link between community structure and function. Sci Total Environ 407: 3611–3619.
- 18.
Madsen EL (2010) Stable Isotope Probing Techniques and Bioremediation. In: Murrell JC, Whiteley A, editors. pp. 165–202. Washington, DC: ASM Press.
- 19. Chen Y, Murrell JC (2010) When metagenomics meets stable-isotope probing: progress and perspectives. Trends Microbiol 18: 157–163.
- 20. Aanderud ZT, Lennon JT (2011) Validation of heavy-water stable isotope probing for the characterization of rapidly responding soil bacteria. Applied and Environmental Microbiology 77: 4589–4596.
- 21. Xia WW, Zhang CX, Zeng XW, Feng YZ, Weng JH, et al. (2011) Autotrophic growth of nitrifying community in an agricultural soil. Isme Journal 5: 1226–1236.
- 22. Bell TH, Yergeau E, Martineau C, Juck D, Whyte LG, et al. (2011) Identification of nitrogen-incorporating bacteria in petroleum-contaminated Arctic soils by using 15N DNA-based stable isotope probing and pyrosequencing. Applied and Environmental Microbiology 77: 4163–4171.
- 23. Bernard L, Chapuis-Lardy L, Razafimbelo T, Razafindrakoto M, Pablo A-L, et al. (2012) Endogeic earthworms shape bacterial functional communities and affect organic matter mineralization in a tropical soil. ISME Journal 6: 213–222.
- 24. Pilloni G, von Netzer F, Engel M, Lueders T (2011) Electron acceptor-dependent identification of key anaerobic toluene degraders at a tar-oil-contaminated aquifer by Pyro-SIP. FEMS Microbiology Ecology 78: 165–175.
- 25. Lee TK, Lee J, Sul WJ, Iwai S, Chai BC, et al. (2011) Novel biphenyl-oxidizing bacteria and dioxygenase genes from a Korean tidal mudflat. Applied and Environmental Microbiology 77: 3888–3891.
- 26. Kunin V, Engelbrektson A, Ochman H, Hugenholtz P (2010) Wrinkles in the rare biosphere: pyrosequencing errors can lead to artificial inflation of diversity estimates. Environ Microbiol 12: 118–123.
- 27. Huse SM, Welch DM, Morrison HG, Sogin ML (2010) Ironing out the wrinkles in the rare biosphere through improved OTU clustering. Environ Microbiol 12: 1889–1898.
- 28. Reeder J, Knight R (2010) Rapidly denoising pyrosequencing amplicon reads by exploiting rank-abundance distributions. Nat Methods 7: 668–669.
- 29.
Quince C, Lanzen A, Davenport RJ, Turnbaugh PJ (2011) Removing noise from pyrosequenced amplicons. BMC Bioinformatics 12.
- 30. Quince C, Lanzén A, Curtis TP, Davenport RJ, Hall N, et al. (2009) Accurate determination of microbial diversity from 454 pyrosequencing data. Nature Methods 6: 639–641.
- 31. Schloss PD, Westcott SL, Ryabin T, Hall JR, Hartmann M, et al. (2009) Introducing mothur: Open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology 75: 7537–7541.
- 32. Edgar RC, Haas BJ, Clemente JC, Quince C, Knight R (2011) UCHIME improves sensitivity and speed of chimera detection. Bioinformatics 27: 2194–2200.
- 33. Huber T, Faulkner G, Hugenholtz P (2004) Bellerophon: a program to detect chimeric sequences in multiple sequence alignments. Bioinformatics 20: 2317–2319.
- 34. Gontcharova V, Youn E, Wolcott RD, Hollister EB, Gentry TJ, et al. (2010) Black Box Chimera Check (B2C2): a Windows-based software for batch depletion of chimeras from bacterial 16 S rRNA gene datasets. The Open Microbiology Journal 4: 47–52.
- 35. Macková M, Prouzová P, Štursa P, Ryšlavá E, Uhlík O, et al. (2009) Phyto/rhizoremediation studies using long-term PCB-contaminated soil. Environ Sci Pollut Res 16: 817–829.
- 36. Lozupone CA, Knight R (2008) Species divergence and the measurement of microbial diversity. FEMS Microbiol Rev 32: 557–578.
- 37. Zhang L, Xu Z (2008) Assessing bacterial diversity in soil. J Soil Sediment 8: 379–388.
- 38. Gutierrez-Zamora ML, Manefield M (2010) An appraisal of methods for linking environmental processes to specific microbial taxa. Reviews in Environmental Science and Bio-Technology 9: 153–185.
- 39. Bopp LH (1986) Degradation of highly chlorinated PCBs by Pseudomonas strain LB400. J Indust Microbiol 1: 23–29.
- 40. Chain PS, Denef VJ, Konstantinidis KT, Vergez LM, Agullo L, et al. (2006) Burkholderia xenovorans LB400 harbors a multi-replicon, 9.73-Mbp genome shaped for versatility. Proc Natl Acad Sci USA 103: 15280–15287.
- 41. Vézina J, Barriault D, Sylvestre M (2008) Diversity of the C-terminal portion of the biphenyl dioxygenase large subunit. J Mol Microbiol Biotechnol 15: 139–151.
- 42. Hurtubise Y, Barriault D, Powlowski J, Sylvestre M (1995) Purification and characterization of the Comamonas testosteroni B-356 biphenyl dioxygenase components. J Bacteriol 177: 6610–6618.
- 43. Li A, Qu Y, Zhou J, Ma F (2009) Characterization of a newly isolated biphenyl-degrading bacterium, Dyella ginsengisoli LA-4. Applied Biochemistry and Biotechnology 159: 687–695.
- 44. Tillmann S, Strompl C, Timmis KN, Abraham WR (2005) Stable isotope probing reveals the dominant role of Burkholderia species in aerobic degradation of PCBs. FEMS Microbiol Ecol 52: 207–217.
- 45. Pumphrey GM, Madsen EL (2008) Field-based stable isotope probing reveals the identities of benzoic acid-metabolizing microorganisms and their in situ growth in agricultural soil. Appl Environ Microbiol 74: 4111–4118.
- 46. Langenheder S, Prosser JI (2008) Resource availability influences the diversity of a functional group of heterotrophic soil bacteria. Environmental Microbiology 10: 2245–2256.
- 47. Kanaly RA, Harayama S, Watanabe K (2002) Rhodanobacter sp. strain BPC1 in a benzo[a]pyrene-mineralizing bacterial consortium. Appl Environ Microbiol 68: 5826–5833.
- 48. Gentry TJ, Wang G, Rensing C, Pepper IL (2004) Chlorobenzoate-degrading bacteria in similar pristine soils exhibit different community structures and population dynamics in response to anthropogenic 2-, 3-, and 4-chlorobenzoate levels. Microbial Ecology 48: 90–102.
- 49. Nalin R, Simonet P, Vogel TM, Normand P (1999) Rhodanobacter lindaniclasticus gen. nov., sp. nov., a lindane-degrading bacterium. Int J Syst Bacteriol 49 Pt 1: 19–23.
- 50. Uhlík O, Ječná K, Macková M, Vlček C, Hroudová M, et al. (2009) Biphenyl-metabolizing bacteria in the rhizosphere of horseradish and bulk soil contaminated by polychlorinated biphenyls as revealed by stable isotope probing. Appl Environ Microbiol 75: 6471–6477.
- 51. Luo W, D’Angelo EM, Coyne MS (2008) Organic carbon effects on aerobic polychlorinated biphenyl removal and bacterial community composition in soils and sediments. Chemosphere 70: 364–373.
- 52. Glick BR (2010) Using soil bacteria to facilitate phytoremediation. Biotechnology Advances 28: 367–374.
- 53. Taira K, Hirose J, Hayashida S, Furukawa K (1992) Analysis of bph operon from the polychlorinated biphenyl-degrading strain of Pseudomonas pseudoalcaligenes KF707. J Biol Chem 267: 4844–4853.
- 54. Ryšlavá E, Krejčík Z, Macek T, Nováková H, Demnerová K, et al. (2003) Study of PCB degradation in real contaminated soil. Fresenius Environ Bull 12: 296–301.
- 55. Nováková H, Vošáhlíková M, Pazlarová J, Macková M, Burkhard J, et al. (2002) PCB metabolism by Pseudomonas sp. P2. Int Biodeterior Biodegrad 50: 47–54.
- 56. Singer AC, Wong CS, Crowley DE (2002) Differential enantioselective transformation of atropisomeric polychlorinated biphenyls by multiple bacterial strains with different inducing compounds. Appl Environ Microbiol 68: 5756–5759.
- 57. Jones MD, Crandell DW, Singleton DR, Aitken MD (2011) Stable-isotope probing of the polycyclic aromatic hydrocarbon-degrading bacterial guild in a contaminated soil. Environmental Microbiology 13: 2623–2632.
- 58. Padmanabhan P, Padmanabhan S, DeRito C, Gray A, Gannon D, et al. (2003) Respiration of 13C-labeled substrates added to soil in the field and subsequent 16 S rRNA gene analysis of 13C-labeled soil DNA. Appl Environ Microbiol 69: 1614–1622.
- 59. Yu CP, Chu KH (2005) A quantitative assay for linking microbial community function and structure of a naphthalene-degrading microbial consortium. Environ Sci Technol 39: 9611–9619.
- 60. Jeon CO, Park W, Padmanabhan P, DeRito C, Snape JR, et al. (2003) Discovery of a bacterium, with distinctive dioxygenase, that is responsible for in situ biodegradation in contaminated sediment. Proc Natl Acad Sci USA 100: 13591–13596.
- 61. Singleton DR, Powell SN, Sangaiah R, Gold A, Ball LM, et al. (2005) Stable-isotope probing of bacteria capable of degrading salicylate, naphthalene, or phenanthrene in a bioreactor treating contaminated soil. Appl Environ Microbiol 71: 1202–1209.
- 62. Sul WJ, Park J, Quensen JF III, Rodrigues JL, Seliger L, et al. (2009) DNA-stable isotope probing integrated with metagenomics for retrieval of biphenyl dioxygenase genes from polychlorinated biphenyl-contaminated river sediment. Appl Environ Microbiol 75: 5501–5506.
- 63. Leigh MB, Pellizari VH, Uhlík O, Sutka R, Rodrigues J, et al. (2007) Biphenyl-utilizing bacteria and their functional genes in a pine root zone contaminated with polychlorinated biphenyls (PCBs). ISME J 1: 134–148.
- 64. Hardisson C, Sala-Trepat JM, Stanier RY (1969) Pathways for the oxidation of aromatic compounds by Azotobacter. Journal of general microbiology 59: 1–11.
- 65. White DC, Sutton SD, Ringelberg DB (1996) The genus Sphingomonas: physiology and ecology. Current Opinion in Biotechnology 7: 301–306.
- 66. Kiener P, Tshisuaka B, Fetzner S, Lingens F (1996) Degradation of benzoate via benzoyl-coenzyme A and gentisate by Bacillus stearothermophilus PK1, and purification of gentisate 1,2-dioxygenase. Biology and Fertility of Soils 23: 307–313.
- 67. Zhang H, Sekiguchi Y, Hanada S, Hugenholtz P, Kim H, et al. (2003) Gemmatimonas aurantiaca gen. nov., sp. nov., a gram-negative, aerobic, polyphosphate-accumulating micro-organism, the first cultured representative of the new bacterial phylum Gemmatimonadetes phyl. nov. International journal of systematic and evolutionary microbiology 53: 1155–1163.
- 68. Singleton DR, Sangaiah R, Gold A, Ball LM, Aitken MD (2006) Identification and quantification of uncultivated Proteobacteria associated with pyrene degradation in a bioreactor treating PAH-contaminated soil. Environmental Microbiology 8: 1736–1745.
- 69. Singleton DR, Richardson SD, Aitken MD (2011) Pyrosequence analysis of bacterial communities in aerobic bioreactors treating polycyclic aromatic hydrocarbon-contaminated soil. Biodegradation 22: 1061–1073.
- 70. Uhlík O, Strejček M, Junková P, Šanda M, Hroudová M, et al. (2011) Matrix-Assisted Laser Desorption Ionization (MALDI)-Time of Flight Mass Spectrometry- and MALDI Biotyper-based identification of cultured biphenyl-metabolizing bacteria from contaminated horseradish rhizosphere soil. Appl Environ Microbiol 77: 6858–6866.
- 71. Ionescu M, Beranová K, Dudková V, Kochánková L, Demnerová K, et al. (2009) Isolation and characterization of different plant associated bacteria and their potential to degrade polychlorinated biphenyls. Int Biodeterior Biodegrad 63: 667–672.
- 72. Schloss PD, Gevers D, Westcott SL (2011) Reducing the effects of PCR amplification and sequencing artifacts on 16 S rRNA-based studies. PLoS ONE 6: e27310.
- 73. Pavlíková D, Macek T, Macková M, Pavlík M (2007) Monitoring native vegetation on a dumpsite of PCB-contaminated soil. Int J Phytoremediation 9: 71–78.
- 74. Ginard M, Lalucat J, Tummler B, Romling U (1997) Genome organization of Pseudomonas stutzeri and resulting taxonomic and evolutionary considerations. Int J Syst Bacteriol 47: 132–143.
- 75. Baker GC, Smith JJ, Cowan DA (2003) Review and re-analysis of domain-specific 16 S primers. J Microbiol Methods 55: 541–555.
- 76. Cole JR, Wang Q, Cardenas E, Fish J, Chai B, et al. (2009) The Ribosomal Database Project: improved alignments and new tools for rRNA analysis. Nucleic Acids Res 37: D141–D145.
- 77. Thompson JR, Marcelino LA, Polz MF (2002) Heteroduplexes in mixed-template amplifications: formation, consequence and elimination by ‘reconditioning PCR’. Nucleic Acids Res 30: 2083–2088.
- 78. Wang Q, Garrity GM, Tiedje JM, Cole JR (2007) Naïve Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Appl Environ Microbiol 73: 5261–5267.
- 79. Strnad H, Ridl J, Paces J, Kolar M, Vlcek C, et al. (2011) Complete genome sequence of the haloaromatic acid-degrading bacterium Achromobacter xylosoxidans A8. Journal of Bacteriology 193: 791–792.
- 80. Strnad H, Lapidus A, Paces J, Ulbrich P, Vlcek C, et al. (2010) Complete genome sequence of the photosynthetic purple nonsulfur bacterium Rhodobacter capsulatus SB 1003. Journal of Bacteriology 192: 3545–3546.
- 81. Wood DW, Setubal JC, Kaul R, Monks DE, Kitajima JP, et al. (2001) The genome of the natural genetic engineer Agrobacterium tumefaciens C58. Science 294: 2317–2323.
- 82. Westerberg K, Elvang AM, Stackebrandt E, Jansson JK (2000) Arthrobacter chlorophenolicus sp nov., a new species capable of degrading high concentrations of 4-chlorophenol. International Journal of Systematic and Evolutionary Microbiology 50: 2083–2092.
- 83. Link L, Sawyer J, Venkateswaran K, Nicholson W (2004) Extreme spore UV resistance of Bacillus pumilus isolates obtained from an ultraclean spacecraft assembly facility. Microbial Ecology 47: 159–163.
- 84. Rokem JS, Vongsangnak W, Nielsen J (2011) Comparative metabolic capabilities for Micrococcus luteus NCTC 2665, the “Fleming” strain, and Actinobacteria. Biotechnology and Bioengineering 108: 2770–2775.
- 85. McLeod MP, Warren RL, Hsiao WW, Araki N, Myhre M, et al. (2006) The complete genome of Rhodococcus sp. RHA1 provides insights into a catabolic powerhouse. Proc Natl Acad Sci USA 103: 15582–15587.