Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Biophysical Constraints on Optimal Patch Lengths for Settlement of a Reef-Building Bivalve

Correction

7 Nov 2013: Fuchs HL, Reidenbach MA (2013) Correction: Biophysical Constraints on Optimal Patch Lengths for Settlement of a Reef-Building Bivalve. PLOS ONE 8(11): 10.1371/annotation/30af0dbd-0e47-4ea6-a2b8-4255ff782d1f. https://doi.org/10.1371/annotation/30af0dbd-0e47-4ea6-a2b8-4255ff782d1f View correction

Abstract

Reef-building species form discrete patches atop soft sediments, and reef restoration often involves depositing solid material as a substrate for larval settlement and growth. There have been few theoretical efforts to optimize the physical characteristics of a restored reef patch to achieve high recruitment rates. The delivery of competent larvae to a reef patch is influenced by larval behavior and by physical habitat characteristics such as substrate roughness, patch length, current speed, and water depth. We used a spatial model, the “hitting-distance” model, to identify habitat characteristics that will jointly maximize both the settlement probability and the density of recruits on an oyster reef (Crassostrea virginica). Modeled larval behaviors were based on laboratory observations and included turbulence-induced diving, turbulence-induced passive sinking, and neutral buoyancy. Profiles of currents and turbulence were based on velocity profiles measured in coastal Virginia over four different substrates: natural oyster reefs, mud, and deposited oyster and whelk shell. Settlement probabilities were higher on larger patches, whereas average settler densities were higher on smaller patches. Larvae settled most successfully and had the smallest optimal patch length when diving over rough substrates in shallow water. Water depth was the greatest source of variability, followed by larval behavior, substrate roughness, and tidal current speed. This result suggests that the best way to maximize settlement on restored reefs is to construct patches of optimal length for the water depth, whereas substrate type is less important than expected. Although physical patch characteristics are easy to measure, uncertainty about larval behavior remains an obstacle for predicting settlement patterns. The mechanistic approach presented here could be combined with a spatially explicit metapopulation model to optimize the arrangement of reef patches in an estuary or region for greater sustainability of restored habitats.

Introduction

Reef-building marine invertebrates, including oysters, mussels, and corals, form discrete clumps or patches that are elevated above the surrounding sediments. When reefs become degraded, some restoration efforts focus on constructing patches of solid substrates to stimulate larval recruitment and growth [1]. Both the size and roughness of constructed substrate patches may influence the ability of artificial reefs to accumulate new settlers. Larger reefs present a larger settlement target for individual larvae but facilitate settlement over a larger area and may ultimately receive a lower spatially-averaged density of settlers. Rougher reef substrates generate more turbulence, which affects the delivery of larvae to the bed by diffusive mixing and can enhance or reduce settlement depending on larval behavior. Although patch characteristics influence both behavioral and physical processes delivering larvae to the bed, there have been few attempts to quantify the relationship between substrate patch size or roughness and larval settlement. Here we develop a quantitative approach for identifying the characteristics of a habitat patch that will maximize settlement both for individual larvae and for the reef patch.

Eastern oysters (Crassostrea virginica) are an ideal model species for investigating how patch characteristics affect settlement success, because oysters form coarse beds or reefs on soft sediments. Natural oyster reefs are 10 s to 1000 s of m long in the prevailing current direction and are found in intertidal to shallow subtidal regions in estuaries and near shore. Natural reefs in North America tend to be smaller and more intertidal in the South Atlantic region and larger and more subtidal in the North Atlantic region [2], [3]. Oyster restoration most commonly involves constructing artificial reefs by depositing patches of artificial or natural substrate on mud or sand flats [1]. These constructed reefs can boost fitness of the metapopulation as a whole if they reduce larval mortality by increasing the probability that individual larvae will land on an oyster reef. For individual reefs to succeed, however, recruitment rates and adult densities must be high enough for shell accretion to outpace shell loss, so that the reef grows rather than becoming degraded or buried [4][6]. Maximizing settlement may be particularly important in years of low larval supply. Oyster management could benefit from theoretical guidelines on how the size and shape of constructed reefs impact the success of individual reefs in accumulating recruits at high densities.

Existing guidelines suggest that constructed reefs are more successful if they have high vertical relief and are composed of natural substrates with complex surfaces. Higher artificial reefs have higher spat recruitment and adult growth rates [4], [7], [8], in part because elevation above the seafloor provides some protection from sedimentation and hypoxic bottom waters [9], [10]. Rougher substrates also have higher recruitment rates, perhaps because they provide recruits with interstitial spaces as a refuge from predators [11], [12]. The preferred substrate is oyster shell, which provides more habitat microstructure than smoother, flatter shells and may contain residual chemicals that cue oyster larvae to metamorphose [4], [11], [13]. Although recruitment rates and adult survival vary with reef height and substrate types, few studies have directly addressed how substrate roughness or patch size affect the supply of larvae to a constructed reef.

Here we focus on optimizing the size of a reef using a mechanistic study of the physical and behavioral processes delivering larvae to a reef patch. Competent larvae pass over a reef patch from some starting height and can settle on the first pass only if they reach the bed before they are swept past the reef. The distance traveled before hitting bottom (the “hitting distance”) depends on horizontal advection by currents and on vertical delivery of larvae to the bed by larval behaviors and turbulent mixing [14]. Vertical mixing is enhanced by rough substrates that increase bottom drag and generate turbulence [15], [16]. Turbulent mixing can raise or lower settlement probabilities, depending on larval behavior: ascending larvae have higher settlement probabilities in stronger turbulence, whereas descending larvae have lower settlement probabilities in stronger turbulence [17]. Turbulence and larval behavior are intricately linked in bringing larvae in contact with habitat patches.

The role of turbulence in larval supply is more complex when turbulence itself induces behavioral changes. Some mollusc larvae swim up in calm water but retract the velum and sink in turbulence above some threshold value of the dissipation rate of turbulent kinetic energy [18], [19]. Eyed oyster larvae have near-zero velocities in calm water, but in strong turbulence ( cm2 s-3) they actively propel themselves downward [20]. Active diving requires energy, and its ecological advantage is unclear because oyster larvae are negatively buoyant and could simply stop the ciliary beat or retract the velum to sink passively. Fuchs et al. [20] hypothesized that the energetic cost of diving would be offset by fitness gains from raising the probability of hitting discrete patches of oyster reef. Bivalve beds generate more drag and turbulence than surrounding sediments [12], [21], and this roughness-generated turbulence may interact with larval behavior to generate a positive feedback for larval supply to oyster reefs.

We combined empirical models of larval behavior and flow with the “hitting distance” model of McNair and Newbold [14] to estimate the probability that larvae would contact the bottom when passing over patches of different substrate types. This model enabled us to quantify the effects of larval behavior, substrate roughness, current speed, and water depth on larval settlement probabilities and the optimal patch length. The model has applications in oyster restoration and can be used to constrain the size of artificial reef patches over a realistic range of physical habitat characteristics.

Methods

The “Hitting Distance” model [14] predicts the probability that larvae will contact the bottom within a fixed downstream distance of a starting point at some height above the bed. We used empirical models of larval behavior, currents, and turbulence in the hitting-distance model to characterize settlement of oyster larvae over four different substrates. The empirical models are derived from previously published data [12], [20] and are described briefly below and in Tables S1S2 and Figures S1S2.

Larval Behavior

The larval vertical velocity due to behavior was modeled as an empirical function of dissipation rate based on results of experiments with eyed oyster larvae (C. virginica) in grid-stirred turbulence [20]. In that study the larval velocities and water velocities were measured simultaneously using infrared particle-image velocimetry, and behavioral velocities of individual larvae were characterized as a response to the instantaneous dissipation rate . In calm water, larvae swam and rarely sank, but in turbulence they actively dove with greater speed and frequency at higher dissipation rates. Average vertical velocities due to larval behavior ranged from to −1.8 cm s-1 over the range to 10 cm2 s-3, and the transition from ascending to descending occurred at cm2 s-3. The larval vertical behavioral velocity was well described by(1)[20], where is the maximum ascent velocity, is the maximum descent velocity, cm 2 s-3 is a reference value, and the fraction varies from 0 to 1. This model was fitted to the observed behavioral velocities of individual oyster larvae averaged over small bins of dissipation rate to give fitted parameters (Table S1).

Active diving is an unusual response to turbulence, and we wanted to quantify how this behavior would affect the probability of larval contact with a reef. To understand the relative effects of active diving on settlement, we used different parameters in Eq. 1 to represent three behaviors: for active diving in strong turbulence, for passive sinking in strong turbulence, and for neutral buoyancy (Table S1, Fig. S1). Parameters for the active diving condition were taken from [20]. Parameters for the passive sinking condition were identical to those for the active sinking condition except that the larval sinking velocity was restricted to the terminal velocity in still water ( cm s-1) [20]. Neutral buoyancy cm s-1 is a null model that approximates the behavior of oyster larvae in calm water and represents the expected larval velocities if there were no response to environmental conditions.

Flow measurements

To model settlement of oyster larvae, we needed realistic profiles of along-stream advection, vertical mixing, and dissipation rate. We used vertical profiles of current speed , where is height above the bed, based on measurements collected at intertidal sites in coastal Virginia [12]. In that study current profiles were measured over four substrate types: natural oyster reef (C. virginica), mud, and deposited oyster (C. virginica) or whelk (Busycotypus canaliculatus) shell (Fig. 1). Substrate patches had surface areas of 270 m for the natural oyster reef, 1000 m for the mud, 3500 m for the oyster shell, and 240 m for the whelk shell. All sites were adjacent to one another and located approximately 1 km offshore of Virginia, USA. Flow velocities were measured with a Nortek Aquadopp Profiler in 3 cm increments at heights of 19 to 70 cm above the bottom and averaged over 10-min intervals at different stages of the tide. The shear velocity was estimated from each velocity profile by fitting the law of the wall in the log layer.

thumbnail
Figure 1. Photos of substrate patches.

Sites where flow measurements were made [12], including in order from bottom to top of image (A): oyster shell restoration, whelk shell restoration, mud, and oyster reef. Close-ups are oyster shell (B), whelk shell (C), oyster reef (D), and mud (E). Scale bar on images is 0.2 m.

https://doi.org/10.1371/journal.pone.0071506.g001

Flow measurements were collected at discrete depths and at different tidal stages, so we first needed to interpolate, scale, and average the velocity profiles collected over each substrate to create generalized profiles for use in the hitting-distance model. Each measured profile was smoothed using cubic spline interpolation, assuming cm s-1 at the bottom. To model settlement in deeper water, we extrapolated the smoothed profiles to depths of m and 5 m using the log law. Profiles were then normalized by the maximum value , and normalized profiles from each substrate type (12 profiles for natural reefs and 5 profiles for other substrates) were averaged and rescaled by the new maximum value (Fig. S2). For shear velocities we calculated a scale factor (Table S2). Finally we rescaled the normalized velocity profiles to new maximum velocities of to 100 cm s-1 with rescaled shear velocities of . At a given we assumed the flow speed to be constant for the duration of a larval transit over a patch. For each rescaled profile we estimated the vertical eddy diffusivity and dissipation rate from shear velocity as and , where is von Karman's constant.

Hitting-distance model

The hitting distance model [14] is a differential equation describing the probability that a particle at initial height will first hit bottom at a downstream distance , where and at the bottom. is given by(2)where is the along-stream velocity, is the larval vertical velocity, and is the vertical eddy diffusivity. The equation is subject to initial conditions at the leading edge of the patch

(3)and boundary conditions at the bottom and surface(4)

We incorporated our empirical models in Eqs. 2–4, solved for numerically using the Matlab partial differential equation solver, and then differentiated numerically to get , the probability density function for hitting distance. The cumulative distribution of from to gives , the probability that larvae starting at a height will hit the bottom while passing over a patch of length . For simplicity we assumed that larvae settle and metamorphose on contact with the bed, so that represents a settlement probability. We ran the model using four different substrate types and three different behavior conditions for current speeds of to 100 cm s-1, water depths of , 2.0, and 5.0 m, and patch lengths of up to m.

The optimal patch length is defined here as the patch length that jointly maximizes the average settlement probability of individual larvae and the average density of settlers per unit reef length. If the initial vertical distribution of larval concentration is , then the depth-averaged probability that larvae will settle within a patch of length is(5)where concentrations are weighted as . For this study we assumed that larvae start with an even vertical distribution. Subscripts denote the average settlement probabilities of larvae that dive in turbulence , sink passively in turbulence , or are neutrally buoyant , respectively, and these subscripts are used throughout. The average settler density probability per unit reef length is the depth-integrated settlement probability normalized by the patch length,(6)and the average density of recruits per unit reef length is . We defined the joint settlement probability as an indicator of whether individual larvae settle successfully while the reef receives a high density of settlers. The joint settlement probability reached a maximum at an optimal patch length and current speed .

The maximum joint settlement probability was estimated assuming a constant current speed, but oysters live in tidal systems where the ideal patch characteristics would maximize the average over a complete tidal cycle. The time-averaged will vary depending on the tidal pattern (e.g., diurnal or semi-diurnal). We estimated optimal patch characteristics for semi-diurnal tides using a simple sinusoidal model of tidal velocity,(7)where h and the peak tidal velocity ranged from 1 to 100 cm s-1. For each we linearly interpolated the maximum joint settlement probabilities and optimal patch lengths from to and averaged over the tidal period to get and , the tidally averaged maximum joint settlement probability and optimal patch length.

Results

Depth-averaged larval settlement probabilities were consistently highest in shallow water, but for diving larvae had a dome-shaped relationship with current speed (Fig. 2, 3). The dome shape indicates that the delivery of larvae to the bed is dominated by behavioral vertical advection at low flow speeds and offset by vertical mixing at high flow speeds. An increase in flow speed corresponds both to an increase in dissipation rate, which induces larvae to dive faster, and to an increase in eddy diffusivity, which eventually overwhelms the larval ability to concentrate near the bottom. For passive sinkers, the relationship between settlement probability and was sometimes bimodal with local maxima both at intermediate current speeds and at the lowest current speeds. Settlement peaked at the lowest current speeds only when turbulence was too weak to induce much larval sinking, so that larvae needed a long travel time over the patch to contact the bed. Neutrally buoyant larvae always had an even vertical distribution and settlement probabilities that were independent of flow speed.

thumbnail
Figure 2. Settlement probability on a 30-m substrate patch.

Depth-averaged settlement probabilities vs. current speed at three water column depths: m (A, D, G), m (B, E, H), and m (C, F, I). Includes settlement probabilities of larvae that dive in turbulence (A–C), larvae that sink passively in turbulence (D–F), and neutrally buoyant larvae (G–I). Symbols indicate substrate type: open circles, natural reef; closed circles, oyster shell; trianges, mud; , whelk shell.

https://doi.org/10.1371/journal.pone.0071506.g002

thumbnail
Figure 3. Settlement probability of actively diving larvae.

Depth-averaged settlement probability vs. current speed and reef patch length for larvae settling over natural reefs (A, C, E) and deposited oyster shell (B, D, F) in water depths of m (A–B), m (C–D), and m (E–F).

https://doi.org/10.1371/journal.pone.0071506.g003

Settlement probabilities were highest over rougher substrates, which produced more turbulence that contributed both to dissipation-induced larval descents and to vertical mixing. Diving larvae had higher peak settlement probabilities at lower optimal flow speeds over hydraulically rougher substrates (natural reef and whelk shell) than over smoother substrates (mud and oyster shell). One counter-intuitive result was that settlement probabilities over mud were slightly higher than those over deposited oyster shell (Fig. 2). Currents over the mud patch were measured near ( m distant) the natural oyster reef and restoration sites and probably retained some influence of the nearby reef. The natural reef and deposited whelk shell also had similar results due to their similar ratio of current speed to shear velocity . Hereafter we report results only for natural oyster reefs and deposited oyster shell.

The settlement probability generally increased with patch length (Fig. 3), whereas the settler density probability decreased with patch length (Fig. 4). The patch length required for most larvae () to settle was shorter in shallower water than in deeper water and shorter over rougher substrates than over smoother substrates (Fig. 3). Although individual larvae are more likely to contact a large patch than a small one, the settlement probability increases with patch length most rapidly at small . Thus most larvae would settle near the leading edge of a patch, and increasing the patch length would reduce the average density of settlers per unit patch length. The settler density probability was higher in shallower water than in deeper water and slightly higher over rougher substrates than over smoother substrates (Fig. 4). Substrate type had little effect on settler density except on the smallest patches in weak currents, where was up to 1.8 times higher on the natural oyster reef than on deposited oyster shell. The settler density probability, like the settlement probability, had a dome-shaped relationship with and was highest at intermediate flow speeds.

thumbnail
Figure 4. Settler density probability of actively diving larvae.

Settler density probability per meter of reef length vs. current speed and reef patch length for larvae settling over natural reefs (A, C, E) and deposited oyster shell (B, D, F) in water depths of m (A–B), m (C–D), and m (E–F). Settler density probability is shown on a scale.

https://doi.org/10.1371/journal.pone.0071506.g004

The joint settlement probability had a maximum value at an optimal current speed and patch length (Fig. 5, 6, 7). For diving larvae, the maximum occurred at a higher and a longer in deeper water than in shallower water and over smoother substrates than over rougher substrates. Passively sinking larvae had similar results except that like the joint settlement probability sometimes had two local maxima, where the largest occurred at the lowest current speed (Fig. 6D–F). The peak at the lowest current speed indicates that in nearly stagnant currents the dissipation rates were high enough near the bed to induce some sinking, while the weak vertical mixing and slow currents gave larvae a long travel time over the reef bed and enabled high settlement rates. For neutrally buoyant larvae was independent of current speed but varied with patch length, and was longer in deeper water than in shallower water (Fig. 7).

thumbnail
Figure 5. Joint settlement probability of actively diving larvae.

Joint settlement probability vs. current speed and reef patch length for larvae settling over natural reefs (A, C, E) and deposited oyster shell (B, D, F) in water depths of m (A–B), m (C–D), and m (E–F). White dashed lines indicate optimal patch lengths at each current speed, and indicates the overall optimal patch length and current speed where joint settlement probability reaches a maximum .

https://doi.org/10.1371/journal.pone.0071506.g005

thumbnail
Figure 6. Joint settlement probability of passively sinking larvae.

Joint settlement probability vs. current speed and reef patch length for larvae settling over natural reefs (A, C, E) and deposited oyster shell (B, D, F) in water depths of m (A–B), m (C–D), and m (E–F). White dashed lines indicate optimal patch lengths at each current speed, indicates the overall optimal patch length and current speed where joint settlement probability reaches a maximum , and indicates second local maximum .

https://doi.org/10.1371/journal.pone.0071506.g006

thumbnail
Figure 7. Joint settlement probability of neutrally buoyant larvae.

Joint settlement probability vs. reef patch length for larvae settling over natural reefs (A, C, E) and deposited oyster shell (B, D, F) in water depths of m (A–B), m (C–D), and m (E–F). Dashed lines indicate optimal patch lengths where joint settlement probability reaches a maximum .

https://doi.org/10.1371/journal.pone.0071506.g007

The tidally averaged optimal patch lengths varied little with peak tidal velocities except in relatively slow currents () but varied considerably with water depth, larval behavior, and substrate type (Fig. 8). To quantify this variation we averaged the optimal patch lengths and joint settlement probabilities for all cm s-1 to get mean tidally averaged values and (Fig. 9). Mean optimal patch lengths ranged from 22 m for diving larvae in m depth to 1615 m for neutrally buoyant larvae in m depth. For a given combination of substrate and behavior, varying the water depth from 0.7 to 5 m accounted for up to a factor of 17 variation in and . For all substrate types or water depths, the joint settlement probability of diving larvae were about double those of passive sinkers and about three times those of neutrally buoyant larvae. Neutrally buoyant larvae had optimal patch lengths 1.5 to 2 times greater than those of passive sinkers and 3 to 4 times greater than those of diving larvae for all substrate types and water depths. Joint settlement probabilities were to higher on natural oyster reef than on deposited shell, whereas optimal patch lengths were to larger for deposited oyster shell than for natural reefs. Overall, substrate roughness had a relatively small effect on settlement probabilities, settler densities, and optimal patch length when compared to water depth or larval behavior.

thumbnail
Figure 8. Tidally averaged optimal patch lengths.

Optimal patch length averaged over a tidal cycle vs. peak tidal velocity at water depths of m (A), m (B), and m (C). Symbols indicate behavior and substrate type: circle, diving larvae; down-triangle, passively sinking larvae; and up-triangle, neutrally buoyant larvae on natural oyster reef (closed symbols) and oyster shell (open symbols).

https://doi.org/10.1371/journal.pone.0071506.g008

thumbnail
Figure 9. Mean optimal patch lengths.

Mean of tidally averaged A) optimal patch length and B) maximum joint settlement probability vs. water depth . Means are computed from tidally averaged values with peak tidal velocities cm s-1. Results are shown for diving larvae, passively sinking larvae, and neutrally buoyant larvae on natural oyster reef and deposited oyster shell.

https://doi.org/10.1371/journal.pone.0071506.g009

Discussion

Larval settlement is critical for the formation and maintenance of oyster reefs, and this study quantifies settlement variation arising from larval behavior and physical habitat characteristics. Although behavior is species-specific, the habitat characteristics we addressed are universal, and our approach and results are generally applicable for other reef-building species. In particular the reef length can be optimized by considering the tradeoff between higher settlement probabilities on large patches and higher recruitment densities on small patches. A patch shorter than the tidally averaged optimal will achieve a high settler density at the cost of a low larval settlement probability, wasting more larvae. A patch longer than will achieve a high larval settlement probability at the cost of a low settler density, limiting upward reef growth. The optimal is a target size for patch restoration. The value of depends on larval behavior and physical habitat characteristics about which some uncertainty is inevitable. Since the joint settlement probability is most variable at small (e.g., Fig. 7), it would be better to err on the side of creating larger patches. Predictions from this model are testable and suggest new guidelines for improving the design of restored oyster reefs.

Importance of habitat characteristics

The prediction that optimal patch size increases with water depth is consistent with natural variation in the size of oyster reefs. For example, in the relatively shallow Duplin River (Georgia) there are hundreds of small oyster beds on the edges of the channel ( m) with patch lengths of 10 s to 100 s of m [22], [23]. The James Estuary in southern Chesapeake Bay (Virginia) historically had oyster reefs in intermediate depths ( m) with patch lengths of a few 100 s of m to km [24], [25]. In the deeper Delaware Bay (New Jersey), oyster beds in the shallower waters ( to 10 m) of the upper bay and near shore are smaller ( km) whereas those in deeper water ( m) toward the main channel and west end of the bay are larger ( km) [5]. Data on patch lengths are sparse and imprecise but suggest that natural reefs are generally within the range of optimal sizes predicted by the hitting-distance model.

Although patch size and water depth are relatively easy to observe, recruitment rates are measured in diverse ways that make comparisons to model results difficult. In particular the model predicts only settlement and settler-density probabilities, whereas observations quantify total recruitment that reflects additional variation in larval concentrations and post-settlement mortality. It is also difficult to compare time-integrated recruitment on subtidal reefs and intertidal reefs that are submerged for only a fraction of the tidal cycle. Observations provide conflicting evidence of whether recruitment rates are higher on subtidal or intertidal reefs [7], [26], [27], and these inconsistencies may arise from differences in larval supply, submergence time, or reef size itself.

One unexpected result of this study was that when compared to water depth or larval behavior, substrate roughness accounted for the least variability in settlement or optimal patch lengths. Many comparative or manipulative studies have focused on how substrate composition or shape affect recruitment rates on restored reefs. Although substrate types affect post-settlement survival [12] and should still be chosen with care, our results suggest that greater effort should be devoted to understanding other sources of recruitment variability. In fact the simplest and most effective way to optimize the design of restored reefs may be to ensure that deposited substrate patches are of an appropriate size for the average water depth.

These results point to an underappreciated potential mechanism for the global collapse of historical oyster reefs [28], [29]. When reef substrate is removed by destructive harvesting [6], [30], the loss of broodstock oysters reduces the potential total reproductive output while shrinking the reef footprint. If a reef patch was near the optimal size before harvesting, then any reduction in patch size would also reduce the settlement probability of individual larvae (Fig. 3) and the maximum attainable joint settlement probability (Figs. 5, 6, 7). Through its effects on settlement, a loss of reef habitat may ultimately increase larval wastage and reduce the effective fecundity of remaining adults.

Importance of larval behavior

Model results imply that larval diving in turbulence confers advantages besides higher settlement rates. Sinking by late-stage larvae generally enhances larval retention near estuarine habitats [31], [32] and near-bed concentrations in tidal currents [17]. Oyster larvae are negatively buoyant and could achieve those benefits by sinking passively. Compared to passive sinkers in this model, however, diving larvae had about twice the joint settlement probability and about half the optimal patch length. Smaller reef patches are beneficial for filter feeders because suspended particles become depleted over the length of a patch [33], and adult oysters on small reefs will receive more food on average than those on large reefs. Thus turbulence-induced diving not only enhances the probability of larvae hitting a reef, it also provides a potential mechanism to shorten reef lengths and enhance the average food supply for adults. These combined benefits could offset the energetic costs of diving in turbulence.

The modeled effects of larval behavior on settlement were non-trivial, suggesting that for species whose economic value relies on habitat restoration, greater attention should be paid to characterizing larval behaviors. Here we ignored other behavior cues and focused on how settlement is affected by responses to turbulence as observed in the laboratory [20]. Behavior is also modified by salinity and temperature, although the absolute larval swimming speed changes by only a few percent per unit salinity or degree C [34], [35]. Responses to salinity and temperature would have little effect on net motion, because swimming larvae alternate between ascending and descending and have average vertical swimming speeds near zero [20], [34]. In contrast, turbulence induces a change in behavior mode that can alter larvae vertical velocities by centimeters per second over a realistic range of turbulence conditions, and for some species the overall behavior in situ appears to be dominated by responses to turbulence [36]. It remains to be tested whether laboratory observations on oyster larvae resemble behavior in estuaries where turbulence is anisotropic, topographically influenced, and potentially conflated with waves.

Perhaps the largest uncertainty for oyster larval behavior is how vertical velocities and attachment probabilities are influenced by chemical cues. Settlement is enhanced by chemicals from adult oysters [13], [37], but the interactions between chemical cues and flow are less well understood for oysters than for other species. Nudibranch larvae Phestilla sibogae sink and attach to substrates when they encounter a chemical cue from their obligate coral prey species [38], [39], and this behavior can enhance transport to and settlement success on coral reefs in wavy, turbulent flow [40], [41]. Chemical cues diffuse rapidly and may be detectable only within a few cm of the substrate [40], [42], so cue effectiveness depends on turbulence intensity. For oyster larvae the combined responses to chemical cues and turbulence on oyster reefs may produce complex settlement dynamics.

Until behavioral uncertainties are resolved, our model results can be viewed as a range of potential outcomes for oyster settlement. The true joint settlement probability and optimal patch size should lie somewhere between those estimated here for diving larvae and for neutrally buoyant larvae. Between these two extremes of behavior, the mean and varied by a factor of three to four, indicating that settlement dynamics are sensitive to behavioral effects on larval delivery to the bed. This sensitivity to larval behavior is pervasive in larval transport models, and our results underscore the importance of using appropriate empirical models of how larvae respond to the environment.

Model limitations

The hitting-distance model has only one horizontal spatial dimension and a homogeneous bottom, limiting our ability to assess the importance of patch shape or elevation. Oyster beds have various 2-dimensional shapes ranging from relatively round reefs to more string-shaped reefs aligned either with or across the main current [3]. Settlement should be highest near the leading edge, but the leading edge alternates with the tidal stage so that settlement is distributed over both ends of the patch. Symmetric and asymmetric tides may produce different optimal shapes, and round reefs may form when the magnitude of cross-current flow is high relative to along-current flow. The omission of bottom topography obscures other physical effects on settlement from reef elevation or availability of interstitial spaces [4], [12], [41] that require further investigation. This model suggests guidelines for the maximum dimension of a restored reef in the along-current direction, whereas the patch shape should be modified according to local cross-current flow conditions.

The model's lack of time dependence makes it difficult to account for tidal variation in current velocities and water depths. Instead we assumed that current speeds are constant for the duration of larval travel over the patch and that an average water depth is representative of the variation in tidal height. The current speed assumption is reasonable under most conditions but becomes less tenable over large reefs. We expect that this assumption contributes only small errors, because the peak tidal velocity had little influence on tidally averaged results (Fig. 8). Larger errors may arise from the use of a constant water depth, given that settlement varied greatly with depth. Future studies could account for tidal variation in water depth the same way we accounted for tidal variation in velocity, by generating model results for a more highly resolved range of depths and velocities and interpolating results over a tidal cycle with changing tidal heights. That approach would be computationally expensive and is better suited for predicting optimal patch lengths in a specific system, particularly where reefs are submerged for only a fraction of the tidal cycle.

Optimal patch sizes may also be affected by other processes that contribute to oyster fitness. Food particles are delivered to adult oysters by the same physical processes that supply larvae to a reef, so food supply is proportional to for arriving food particles. Assuming that food particles are neutrally buoyant, we could account for food supply by maximizing , which would reduce the estimated optimal patch size. Although a smaller reef may receive more food per unit length, it would also be more susceptible to hazards at the reef edge such as predation and sedimentation [2]. These tradeoffs are better understood for mussel beds, which experience both greater food ability and higher dislodgment forces at the patch edge [33], [43], [44]. Like mussel beds, oyster reefs are further constrained by topography and other landscape characteristics [45], and these processes should be addressed in system-specific studies.

Scaling up from patches to metapopulations

Larvae can settle successfully only if they reach competency and encounter a patch while dispersing, and it is unclear how patches should be arranged in an estuary or region to globally optimize the success of both dispersing larvae and individual reef patches. For a single patch the optimal habitat configuration is independent of larval concentration, but in a metapopulation the relative success of individual patches will depend on larval supply and the distribution of source and sink populations [2], [46]. The optimal distribution of patches may also depend on the dispersal distance during the larval development time or the degree of isolation needed to minimize the spread of disease or predators among patches [2]. To better meet management goals, this and other optimization approaches should be combined in a spatially explicit metapopulation framework [47][49].

Supporting Information

Figure S1.

Larval behavior functions. Larval behavioral vertical velocity vs. dissipation rate for three behaviors used: active diving in turbulence (solid line) [20], passive sinking in turbulence (dashed line), and neutral buoyancy (dotted line).

https://doi.org/10.1371/journal.pone.0071506.s001

(EPS)

Figure S2.

Current velocity profiles. Height vs. normalized mean current velocities over four substrates: healthy oyster reef, deposited oyster shell, deposited whelk shell, and mud. A–D) Velocity profiles interpolated from observations in m depth [12] and normalized by the maximum velocity, including individual profiles (red lines) and their mean (black lines). Remaining panels as in A–D except interpolated profiles were extrapolated to a height of m (E–H) or m (I–L) using the log law before being normalized by maximum velocity.

https://doi.org/10.1371/journal.pone.0071506.s002

(EPS)

Acknowledgments

D. Bushek, J. Grassle, and two anonymous reviewers provided helpful comments on the manuscript. This research was facilitated by the 2011 Aspen Ocean Symposium.

Author Contributions

Conceived and designed the experiments: HLF MAR. Performed the experiments: HLF. Analyzed the data: HLF. Contributed reagents/materials/analysis tools: HLF MAR. Wrote the paper: HLF MAR.

References

  1. 1. Brumbaugh RD, Coen LD (2009) Contemporary approaches for small-scale oyster reef restoration to address substrate versus recruitment limitation: A review and comments relevant for the Olympia oyster, Ostrea lurida Carpenter 1864. J Shellfish Res 28: 147–161.
  2. 2. Eggleston DB (1999) Application of landscape ecological principles to oyster reef habitat restoration. In: Luckenbach MW, Mann R, Wesson JA, editors, Oyster reef habitat restoration: A synopsis and synthesis of approaches. Williamsburg, VA: VIMS Press, 213–227.
  3. 3. Kennedy VS, Sanford LP (1999) Characteristics of relatively unexploited beds of the Eastern oyster, Crassostrea virginica, and early restoration program. In: Luckenbach MW, Mann R, Wesson JA, 15 editors, Oyster reef habitat restoration: A synopsis and synthesis of approaches. Williamsburg, VA: VIMS Press, 25–46.
  4. 4. Lenihan HS (1999) Physical-biological coupling on oyster reefs: How habitat structure inuences individual performance. Ecol Monogr 69: 251–275.
  5. 5. Powell EN, Kraeuter JN, Ashton-Alcox KA (2006) How long does oyster shell last on an oyster reef? Estuarine, Coastal Shelf Sci 69: 531–542.
  6. 6. Mann R, Powell EN (2007) Why oyster restoration goals in the Chesapeake Bay are not and probably cannot be achieved. J Shellfish Res 26: 905–917.
  7. 7. Powers SP, Peterson CH, Grabowski JH, Lenihan HS (2009) Success of constructed oyster reefs in no-harvest sanctuaries: implications for restoration. Mar Ecol: Prog Ser 389: 159–170.
  8. 8. Schulte DM, Burke RP, Lipcius RN (2009) Unprecedented restoration of a native oyster metapopulation. Science 325: 1124–1128.
  9. 9. Lenihan HS, Peterson CH (1998) How habitat degradation through fishery disturbance enhances impacts of hypoxia on oyster beds. Ecol Appl 8: 128–140.
  10. 10. Soniat TM, Finelli CM, Ruiz JT (2004) Vertical structure and predator refuge mediate oyster reef development and community dynamics. J Exp Mar Biol Ecol 310: 163–182.
  11. 11. Nestlerode JA, Luckenbach MW, O'Beirn FX (2007) Settlement and survival of the oyster Crassostrea virginica on created oyster reef habitats in Chesapeake Bay. Restor Ecol 15: 273–283.
  12. 12. Whitman ER, Reidenbach MA (2012) Benthic ow environments affect recruitment of Crassostrea virginica larvae to an intertidal oyster reef. Mar Ecol: Prog Ser 463: 177–191.
  13. 13. Zimmer-Faust RK, Tamburri M (1994) Chemical identity and ecological implications of a waterborne, larval settlement cue. Limnol Oceanogr 39: 1075–1087.
  14. 14. McNair JN, Newbold JD (2001) Turbulent transport of suspended particles and dispersing benthic organisms: the hitting-distance problem for the local exchange model. J Theor Biol 209: 351–369.
  15. 15. Eckman JE (1990) A model of passive settlement by planktonic larvae onto bottoms of differing roughness. Limnol Oceanogr 35: 887–901.
  16. 16. Crimaldi JP, Thompson JK, Rosman JH, Lowe RJ, Koseff JR (2002) Hydrodynamics of larval settlement: The inuence of turbulent stress events at potential recruitment sites. Limnol Oceanogr 47: 1137–1151.
  17. 17. Fuchs HL, Neubert MG, Mullineaux LS (2007) Effects of turbulence-mediated larval behavior on larval supply and settlement in tidal currents. Limnol Oceanogr 52: 1156–1165.
  18. 18. Young CM (1995) Behavior and locomotion during the dispersal phase of larval life. In: McEdward L, editor, Ecology of Marine Invertebrate Larvae, CRC Press. 249–278.
  19. 19. Fuchs HL, DiBacco C (2011) Mussel larval responses to turbulence are unaltered by age or light conditions. Limnol Oceanogr: Fluids & Environ 1: 120–134.
  20. 20. Fuchs HL, Hunter EJ, Schmitt EL, Guazzo RA (2013) Active downward propulsion by oyster larvae in turbulence. J Exp Biol 216: 1458–1469.
  21. 21. Green MO, Hewitt JE, Thrush SF (1998) Seabed drag coefficient over natural beds of horse mussels (Atrina zelandica). J Mar Res 56: 613–637.
  22. 22. Zarillo GA (1985) Tidal dynamics and substrate response in a salt-marsh estuary. Mar Geol 67: 13–35.
  23. 23. Walker RL, Cotton C (2001) Oyster bed distribution as a long term environmental indicator for the Duplin River, Sapelo Island National Estuarine Research Reserve. Technical report, University of Georgia School of Marine Programs.
  24. 24. McCormick-Ray J (2005) Historical oyster reef connections to Chesapeake Bay – a framework for consideration. Estuarine, Coastal Shelf Sci 64: 119–134.
  25. 25. Guo X, Valle-Levinson A (2007) Tidal effects on estuarine circulation and outow plume in the Chesapeake Bay. Cont Shelf Res 27: 20–42.
  26. 26. Michener WK, Kenny PD (1991) Spatial and temporal patterns of Crassostrea virginica (Gmelin) recruitment: relationship to scale and substratum. J Exp Mar Biol Ecol 154: 97–121.
  27. 27. Bartol IK, Mann R (1997) Small-scale settlement patterns of the oyster Crassostrea virginica on a constructed intertidal reef. Bull Mar Sci 61: 881–897.
  28. 28. Beck MW, Brumbaugh RD, Airoldi L, Carranza A, Coen LD, et al. (2011) Oyster reefs at risk and recommendations for conservation, restoration, and management. BioScience 61: 107–116.
  29. 29. Ermgassen PSEZ, Spalding MD, Blake B, Coen LD, Dumbauld B, et al. (2012) Historical ecology with real numbers: past and present extent and biomass of an imperilled estuarine habitat. Proc R Soc B 279: 3393–3400.
  30. 30. Powell EN, Klinck JM (2007) Is oyster shell a sustainable estuarine resource? J Shellfish Res 26: 181–194.
  31. 31. North EW, Schlag Z, Hood RR, Li M, Zhong L, et al. (2008) Vertical swimming behavior inuences the dispersal of simulated oyster larvae in a coupled particle-tracking and hydrodynamic model of Chesapeake Bay. Mar Ecol: Prog Ser 359: 99–115.
  32. 32. Kim CK, Park K, Powers SP, Graham WM, Bayha KM (2010) Oyster larval transport in coastal Alabama: Dominance of physical transport over biological behavior in a shallow estuary. J Geophys Res 115: C10019.
  33. 33. Butman CA, Fréchette M, Geyer WR, Starczak V (1994) Flume experiments on food supply to the blue mussel Mytilus edulis L. as a function of boundary-layer ow. Limnol Oceanogr 39: 1755–1768.
  34. 34. Hidu H, Haskin HH (1978) Swimming speeds of oyster larvae Crassostrea virginica in different salinities and temperatures. Estuaries 1: 252–255.
  35. 35. Mann R, Campos BM, Luckenbach MW (1991) Swimming rate and responses of larvae of three mactrid bivalves to salinity discontinuities. Mar Ecol: Prog Ser 68: 257–269.
  36. 36. Fuchs HL, Solow AR, Mullineaux LS (2010) Larval responses to turbulence and temperature in a tidal inlet: Habitat selection by dispersing gastropods? J Mar Res 68: 153–188.
  37. 37. Turner EJ, Zimmer-Faust RK, Palmer MA, Luckenbach M, Pentcheff ND (1994) Settlement of oyster (Crassostrea virginica) larvae: Effects of water flow and a water-soluble chemical cue. Limnol Oceanogr 39: 1579–1593.
  38. 38. Hadfield MG, Koehl MAR (2004) Rapid behavioral responses of an invertebrate larva to dissolved settlement cue. Biol Bull 207: 28–43.
  39. 39. Koehl MAR, Hadfield MG (2004) Soluble settlement cue in slowly moving water within coral reefs induces larval adhesion to surfaces. J Mar Syst 49: 75–88.
  40. 40. Koehl MAR, Reidenbach MA (2007) Swimming by microscopic organisms in ambient water flow. Exp Fluids 43: 755–768.
  41. 41. Reidenbach MA, Koseff JR, Koehl MAR (2009) Hydrodynamic forces on larvae affect their settlement on coral reefs in turbulent, wave-driven flow. Limnol Oceanogr 54: 318–330.
  42. 42. Crimaldi JP, Koseff JR (2001) High-resolution measurements of the spatial and temporal scalar structure of a turbulent plume. Exp Fluids 31: 90–102.
  43. 43. Witman JD, Suchanek TH (1984) Mussels in flow: drag and dislodgement by epizoans. Mar Ecol: Prog Ser 16: 259–268.
  44. 44. van de Koppel J, Rietkerk M, Dankers N, Herman PMJ (2005) Scale-dependent feedback and regular spatial patterns in young mussel beds. Am Nat 165: E66–E77.
  45. 45. van de Koppel J, Bouma TJ, Herman PMJ (2012) The influence of local- and landscape-scale processes on spatial self-organization in estuarine ecosystems. J Exp Biol 215: 962–967.
  46. 46. Lipcius RN, Eggleston DB, Schreiber SJ, Seitz RD, Shen J, et al. (2008) Importance of metapopulation connectivity to restocking and restoration of marine species. Rev Fish Sci 16: 101–110.
  47. 47. Coen LD, Luckenbach MW (2000) Developing success criteria and goals for evaluating oyster reef restoration: Ecological function or resource exploitation? Ecol Eng 15: 323–242.
  48. 48. North EW, King DM, Xu J, Hood RR, Newell RIE, et al. (2010) Linking optimization and ecological models in a decision support tool for oyster restoration and management. Ecol Appl 20: 851–866.
  49. 49. van der Zee EM, van der Heide T, Donadi S, Eklöf JS, Klemens Eriksson B, et al. (2012) Spatially extended habitat modification by intertidal reef-building bivalves has implications for consumerresource interactions. Ecosystems 15: 664–673.