Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Expression Profiling in Bemisia tabaci under Insecticide Treatment: Indicating the Necessity for Custom Reference Gene Selection

Abstract

Finding a suitable reference gene is the key for qRT-PCR analysis. However, none of the reference gene discovered thus far can be utilized universally under various biotic and abiotic experimental conditions. In this study, we further examine the stability of candidate reference genes under a single abiotic factor, insecticide treatment. After being exposed to eight commercially available insecticides, which belong to five different classes, the expression profiles of eight housekeeping genes in the sweetpotato whitefly, Bemisia tabaci, one of the most invasive and destructive pests in the world, were investigated using qRT-PCR analysis. In summary, elongation factor 1α (EF1α), α-tubulin (TUB1α) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) were identified as the most stable reference genes under the insecticide treatment. The initial assessment of candidate reference genes was further validated with the expression of two target genes, a P450 (Cyp6cm1) and a glutathione S-transferase (GST). However, ranking of reference genes varied substantially among intra- and inter-classes of insecticides. These combined data strongly suggested the necessity of conducting custom reference gene selection designed for each and every experimental condition, even when examining the same abiotic or biotic factor.

Introduction

Quantitative real-time reverse transcription polymerase chain reaction (qRT-PCR) is one of the most effective and sensitive techniques for gene expression analysis [1][4]. However, enabling comparisons across different samples, qRT-PCR data must be normalized to correct variations in pipetting, RNA concentration, reverse-transcription, and efficiency of PCR amplification [2], [5], [6]. The most common normalization method is to compare the mRNA level of the target gene with that of a reference gene whose expression level is considered stable regardless of different experimental conditions [7][9]. However, none of the reference genes discovered thus far is consistently expressed in a universal and invariant way under various experimental conditions [10], [11], and recent reference gene selection studies indicate that a single reference gene is generally insufficient to normalize the expression data of all target genes [12][16].

In insect, the reference genes have been validated at least in the desert locust Schistocerca gregaria [17], the oriental fruit fly Bactrocera dorsalis [18], the fruit fly Drosophila melanogaster [19] emerald ash borer Agrilus planipennis [20], the diamondback moth Plutella xylostella [21], the tobacco whitefly Bemisia tabaci [22], and the red imported fire ant, Solenopsis invicta [23] under a diverse set of biotic and abiotic conditions. However, no one single universal reference was identified, either. Therefore, it is not surprising that no single universal reference is available for four different lepidopteran insect species [24]. In this context, reliable reference genes for gene expression analysis based on different experimental conditions should be selected.

The tobacco whitefly, B. tabaci, is an invasive insect pest of agriculture and horticulture worldwide [25]. Because of the application of chemical insecticides has been the primary strategy for the control of B. tabaci, this pest has developed different levels of resistance to a wide range of insecticides [26][33]. It has been well documented that insecticide resistance in B. tabaci usually is associated with enhanced detoxification by oxidative and hydrolytic pathways [34][36]. Therefore, increasing numbers of studies are using the RT-qPCR techniques to detect the changes of mRNA expression of detoxifying enzymes genes in resistant populations and tried to provide new insights into insecticides resistance mechanisms [37], [38].

Though the suitable references genes has been documented in bacterially challenged bees [39], in Tribolium beetles infected with fungus [40], in plant virus infected B. tabaci [22] and in Bt toxin treated P. xylostella [21], this kind of information is lacking for insects stressed by different types of chemical insecticides.

In this study, a set of reliable reference genes for gene expression analysis in the B. tabaci biotype Q, one of the most invasive and destructive pest in the world, after exposure to eight commonly used insecticides (which belong to five different classes) was selected and then valuated with two target genes, a P450 gene (Cyp6cm1) and glutathione S-transferase gene (GST). Over expression of the P450 has been proved to be responsible for neonicotinoid insecticides resistance in B. tabaci [35], [37] while this is not the case for GST. The objective of this work is to provide a set of universal reliable reference genes for research of genes with toxicological function in B. tabaci.

Materials and Methods

Ethics Statement

Bemisia tabaci biotype Q strains used in this study were initially collected in the field at Beijing in 2010, and have been maintained in in our laboratory at the China Agricultural University for three years without exposure to any insecticide. No specific permit was required for the described field collections, and the location is not privately-owned or protected in any way. The species in the genus of Bemisia are common agricultural pests and are not included in the “List of Endangered and Protected Animals in China”.

Leaf-dip bioassay and B. tabaci susceptibility to various insecticides

A total of eight kinds of insecticides commonly been used in the management of B. tabaci were used in this study, including chlopyrifos, beta-cypermethrin, carbosulfan, abamectin, buprofezin and three neonicotinoids (imidacloprid, acetamiprid, nitenpyram. All insecticides used were of technical grade with purity greater than 95%.

First, the LC50 of each insecticide to Bemisia tabaci biotype Q was determined using the leaf-dip method [41]. Briefly, the stock solution of insecticide was diluted to five to seven concentrations with 0.02% Triton X-100, then eggplant leaf discs (33 mm in diameter) were dipped in aqueous solutions of insecticides for 10 s After being air-dried for 1 h, the leaf disc was placed abaxial side down on the bed of agar (2%) within the plug seal cap of a 100 ml centrifuge tube (the bottom of the tube was cut off and covered with a piece of black cotton cloth, the tube was 8 cm in height and 3.8 cm in diameter). Approximately 30–50 adult whiteflies were transferred into the tubes and the tubes were thereafter covered with the caps (with leaf disc inside). Adult whiteflies treated with 0.02% Triton X-100 were used as control. Four replicates of each concentration were carried out. The adults were allowed to feed on the treated disc for 48 h or 72 h (depending on classes of insecticide) at 25±2°C, 75% RH, and a 16∶8-h (light∶dark) photoperiod. LC50 values and their virulence regression equation slope were calculated using PoloPlus™ software (LeOra Software, Berkeley, USA). The bioassay results were listed in Table S1.

And then the similar leaf-dip method was used for treatment of B. tabaci except that the eggplant leaf discs were dipped at a concentration corresponding to the LC50 of each insecticide, respectively. About 300 adults were treated for each insecticide. The adults were allowed to feed on the treated disc for 48 h at 25±2°C, 50–70% RH, and a 12∶12 h (light∶ dark) photoperiod. Adult whiteflies treated with 0.02% Triton X-100 were used as control. The surviving insects were collected for subsequent RNA extraction. Three biological replicates were performed for each insecticide treatment.

Total RNA extraction and cDNA synthesis

Total RNA was extracted from 100 to150 B. tabaci adults using Trizol Reagen (Invitrogen, Carlsbad, CA) following the manufacturer's instructions. RNA concentration and quality were measured according to the optical density at 260 nm and the A260/A280 absorption ratio using a NAS-99 spectrophotometer (ACTGene, USA). RNA samples with an A260/A280 ratio ranging from 1.8 to 2.0 and A260/A230>2.0 were used for analysis. All RNA samples were adjusted to the same concentration to homogenize RNA input in the subsequent reverse-transcription reaction. One microgram of RNA was reverse transcribed into first-strand cDNA using a Thermo Scientific Verso™ cDNA Synthesis Kit (Thermo Scientific, Wilmington, DE, USA). The cDNA was stored at −20°C until use.

Primer design and quantitative real-time PCR

A total of eight candidate reference genes, including five commonly used reference genes, β-actin (ACT), α-tubulin (TUB1α), elongation factor 1α (EF1α), glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and 18S ribosomal RNA(18S rRNA), as well as three rarely used reference genes ribosomal protein L13a (RPL13A), cyclophilin 1(CYP1) and TATA box binding protein-associated factor (TBP-AF) in B. tabaci were chosen for valuation of their expression stability in B. tabaci. The sequences, length of products, and source of these candidate genes were listed in Table 1.

thumbnail
Table 1. Candidate reference genes and primers used for qRT-PCR analysis.

https://doi.org/10.1371/journal.pone.0087514.t001

Real-time PCR was conducted using an ABI 7500 Real Time PCR System (Applied Biosystems, Foster, CA) and the ROX's Platinum SYBR Green qPCR SuperMix-UDG kit (Invitrogen, Carlsbad, CA). The reactions were performed in a 20 µL mixture contained 1 µL of cDNA template, 10 µL of SYBR Green qPCR SuperMix-UDG, 1 µL of each primer and 7 µL of nuclease-free water. The optimized real-time PCR program consisted of an initial step at 50°C for 2 min, 95°C for 2 min, followed by 40 cycles of 95°C for 15 s and 60°C for 30 s. Relative standard curves for the transcripts were generated with serial dilutions of cDNA (1/5, 1/15, 1/45, 1/135, and 1/405). The corresponding qRT-PCR efficiencies (E) were calculated according to the equation: E = (10[−1/slope]−1)×100 [42].Three independent biological duplications were performed for all the reference genes studied and data for each biological duplicate were carried out in triplicate. The dissociation curves were obtained after amplification to inspect the specificity of the primer sets.

Statistical analysis

The raw data of qPCR were analyzed using ABI 7500 SDS System software (version 2.0) (Applied Biosystems) and the threshold cycle (Ct value, the cycle at which the fluorescent signal was first significantly different from the background) for each gene-cDNA sample was determined automatically. All biological replicates (each contained three technical replications) were used to calculate the average Ct values using geNorm and NormFinder software packages as described in their manuals. Ct values were converted into relative quantities and imported into the geNorm and the NormFinder software for further analysis. The geNorm provides a measure of gene expression stability (M), and creates stability ranking via a stepwise exclusion of the least stable gene. Genes with the lowest M values have the most stable expression. The geNorm also calculates a serial values of Vn/Vn+1, which indicates the pairwise variation between two sequential normalization factors and determines the optimal number of reference genes required for accurate normalization. A value below 0.15 indicates that an additional reference gene will not significantly improve normalization. Ct values were converted into relative quantities and further analyzed by RefFinder, a user-friendly web-based comprehensive tool (http://www.leonxie.com/referencegene.php), to evaluate the expression stabilities of candidate reference genes. The RefFinder was developed for evaluating and screening reference genes from the extensive experimental datasets. It integrated the currently available major computational programs (geNorm, Normfinder, BestKeeper, and the comparative ΔCt method) [11], [43][45] to compare and rank the tested candidate reference genes. Based on the rankings from each program, it assigns an appropriate weight to an individual gene and calculated the geometric mean of their weights for the overall final ranking. Then starting with the most stable genes the geNorm program was used to calculate the pair-wise variation V of two consecutive normalization factors (NF) that result from stepwise introduction of another gene, and the generally adopted threshold of V = 0.15 was used for decision of the most reliable reference gene combination.

One-way ANOVA was used to compare the relative expression levels of selected target genes (Cyp6cm1 and GST) calculated using three and more sets of optimal reference genes, and Student's t-test for comparison of target gene expression calculated with two sets of reference genes. Both statistical analysis were conducted using SPSS 17.0 for windows (SPSS Inc., Chicago, IL) with a significance level set at P = 0.05.

Results

Amplification specificity and efficiency of the primer sets

Single peaks in the dissociation curves further demonstrated the specificity of all primer sets (data not shown). A standard curve was generated for each gene, using three-fold serial dilutions of the pooled cDNA generated from each experiment. The correlation coefficient and PCR efficiency characterizing each standard curve are given in Table 1. Box plots of raw Ct values of the candidate reference genes among samples were produced respectively, from which the expression stability of the candidate reference genes can be told intuitively (Fig. 1). The eight candidate reference genes expressed different transcription levels from each other, with Ct values spanning 14.23–26.91, in which the lowest Ct (and highest expression) corresponded to 18SrRNA and the highest Ct to EF1α.

thumbnail
Figure 1. Expression levels of candidate reference genes.

The expression level of candidate Bemisia tabaci reference genes in the tested samples is shown in terms of the cycle threshold number (Ct-value). The box plot indicates the mean of duplicate samples; the whiskers indicate the standard error of the mean.

https://doi.org/10.1371/journal.pone.0087514.g001

Expression stability analysis of the candidate genes and optimum number of genes for normalization

The expression profiles of the eight candidate reference genes were assessed in B. tabaci treated with eight different insecticides belong to five classes. For the whiteflies treated by LC50 of abamectin, according to the ranking of stability generated with RefFinder, RPL13A was the most stable gene with the lowest ranking value (1.8) followed by CYP1, TUB1α, ACT, GADPH, EF1α, TBP-AF and the 18SrRNAwas the most unstable one (Figure 2A). If we consider the generally adopted threshold of V = 0.15, the geNorm analysis revealed that two most stable genes are needed for a reliable normalization, because of the addition of a third gene does not result in any appreciable improvement of the normalization factor (Figure 3). Thus the RPL13A and CYP1 were identified as the most stable pair of genes.

thumbnail
Figure 2. Expression stabilities of the candidate reference genes.

The average expression stability of the reference genes was measured using Geomean method by RefFinder. A lower Geomean of ranking value indicates more stable expression. CK: Treated with 0.02% Triton X-100 only. Other 5 insecticides: treated by chlopyrifos, beta-cypermethrin, carbosulfan, abamectin and buprofezin, respectively. Eight insecticides: treated with each of eight insecticides used in this work.

https://doi.org/10.1371/journal.pone.0087514.g002

thumbnail
Figure 3. Optimal number of reference genes for normalization in Bemisia tabaci.

Average pairwise variations (V) were calculated in geNorm between the normalization factors NFn and NFn+1 to indicate whether inclusion of an extra reference gene would add to the stability of the normalization factor. The value of Vn/Vn+1 indicates the pairwise variation between two sequential normalization factors and determines the optimal number of reference genes required for accurate normalization. A value below 0.15 indicates that an additional reference gene will not significantly improve normalization.

https://doi.org/10.1371/journal.pone.0087514.g003

Similar analyses were conducted for the remaining treatments. For the whiteflies treated by LC50 of imidacloprid, the eight candidate reference genes were ranked (from the highest to lowest stability) by the RefFinder as TUB1α<RPL13A<TBP-AF<GADPH<ACT<18SrRNA<EF1α<CYP1 (Figure 2B). And the geNorm analysis revealed the optimum combination of TUB1α, RPL13A and TBP-AF possessed the least variation in their expression ratios (Figure 3), therefore these three genes were identified as the most stable reference gene set.

For the acetamiprid treated group, the order of gene expression stability (from the most stable to the least stable) was calculated as ACT<CYP1<RPL13A<TUB1α<GADPH<EF1α<TBP-AF<18SrRNA by RefFinder (Figure 2C). And the geNorm analysis revealed the optimum pair of genes with least variation was ACT and CYP1 (Figure 3). Therefore, the reference genes of ACT and CYP1 were identified as the most stable pair of genes.

In whiteflies treated with LC50 of nitenpyram, the eight candidate reference genes were ranked (from the highest to lowest stability) by the RefFinder as EF1α<RPL13A<ACT<CYP1<TUB1α<TBP-AF<GADPH<18SrRNA (Figure 2D). And the results of geNorm analysis identified EF1α and RPL13A as the most stable reference gene pair.

For the carbosulfan treated group, according to RefFinder, the expression stability (from the highest to the lowest) of the eight candidate reference genes was ranked as TUB1α<EF1α≪CYP1<RPL13A<GADPH<TBP-AF<ACT<18SrRNA (Figure 2E). Analysis with geNorm (Figure 3) revealed that the TUB1α and EF1α made of the most stable gene pair.

In the chlorpyrifos treated group, the overall final order of the genes from the most stable to the least stable was: TUB1α<CYP1<RPL13A<EF1α<GADPH<TBP-AF<ACT<18SrRNA (Figure 2F). And the TUB1α and CYP1 were identified as the most stable reference gene pair according to the V values calculated with the GeNorm (Figure 3).

Stabilities of the eight genes expressed in B. tabaci treated with beta-cypermethrin were ordered as CYP1<EF1α<RPL13A<TUB1α<GADPH<ACT<18SrRNA<TBP-AF (Figure 2G). Combined with the V value calculated by GeNorm (Figure 3), the reference genes CYP1and EF1α were considered the most reliable pair for gene expression normalization.

For the buprofezin treated group, the expression stability of the eight genes were ranked as CYP1<TBP-AF<TUB1α<RPL13A<EF1α<GADPH<18SrRNA<ACT by RefFinder from the highest to the lowest (Figure 2H). Considering the V value resulted from the GeNorm analysis CYP1and TBP-AF were identified as the most stable gene pair.

The stability order of the eight genes expressed in the control (untreated) group, from the most stable to the least stable, was lined as EF1α<GADPH<TUB1α<CYP1<RPL13A<ACT<TBP-AF<18SrRNA (Figure 2I). And the GeNorm analysis revealed that EF1α and GADPH was the optimum gene pair for a reliable normalization.

When the imidcloprid, acetamiprid and nitenpyram treated group was combined as neonicotinoid treated goup, the stability of the eight candidate genes (from the highest to the lowest) was ranked as ACT<TUB1α<GADPH<RPL13A<EF1α<CYP1<18SrRNA<TBP-AF (Figure 2J). And according to the V values, ACT, TUB1α and GADPH was considered as the most stable reference gene set for normalization.

Combining all the five non-neonictinoid insecticides together for consideration, the RefFinder ranked the eight tested gene from the most stable to the least stable as EF1α<GADPH<CYP1<TUB1α<RPL13A<ACT<TBP-AF<18SrRNA (Figure 2K). And further analysis by the GeNorm identified EF1α, GADPH and CYP1 together as a reliable reference gene set.

Finally, all whitefly groups treated with eight insecticides were analyzed together and designated as the comprehensive group. According to RefFinder, from the most to the least stable reference genes, the overall ranking of the eight candidates across different developmental stages was: EF1α<TUB1α<GADPH<CYP1<RPL13A<ACT<TBP-AF<18SrRNA (Figure 2L). As a result, EF1α, TUB1α and GADPH were considered as the most stable reference genes for qRT-PCR normalization (Table 2).

thumbnail
Table 2. Selected reference genes under different insecticide treatments.

https://doi.org/10.1371/journal.pone.0087514.t002

Validation of selected reference genes in B. tabaci

The relative expression levels of two target genes, Cyp6CM1and GST, were analyzed after whiteflies treated with three neonicotinoid insecticides. No significant differences were found among the expressions of Cyp6CM1and GST using five different sets of reference genes (P>0.05) (Fig. 4 A–C). Similarly, when normalized with their respective optimal reference genes for each of the five non-neonicotinoid insecticides, expression levels of Cyp6CM1and GST also exhibited no apparent differences (P>0.05) (Table 2; Fig. 4 D–H). However, significant expression differences were found between the most stable reference genes for all eight insecticides, EF1α, TUB1α and GADPH, and 18S rRNA, the optimal reference gene recommended previously Fig. 4 I, [22].

thumbnail
Figure 4. Relative expressions of target genes calculated using different sets of reference genes.

The relative expression level of the two target genes were calculated according to the 2−ΔΔCt method (Pfaffl 2001) and using untreated group as control. RG: reference gene.

https://doi.org/10.1371/journal.pone.0087514.g004

Discussion

There exists no doubt that the qRT-PCR technology has made the quantitative determination of gene expression more convenient than ever before. However, extreme care must be taken for the selection of internal reference genes before their application of qRT-PCR. It has been documented that the selection of suitable reference genes is very important to obtain reliable and accurate data [2], [3], [46]. Currently, however, many common reference genes are used as internal controls without any evaluation of their variance and instability, and most publications only use a single internal control for normalization. These un-validated single reference genes, however, were proved to be not always reliable under various experimental conditions [12][16]. Therefore, more and more biologists pay their attention to the selection and validation of reliable reference gene(s) expressed stably regardless of different experimental conditions from the species they are interested in, in order to avoid unnecessary errors in qRT-PCR analysis.

Insecticide resistance is becoming a serious barrier for the sustainable control of pest insects. And the identification of insecticide resistance mechanisms would provide ways of detection and management of resistance [47]. The qPCR has been extensively used to uncover the mechanisms of insecticide resistance, and it has been proven by a lot of publications that the overexpression of detoxifying enzymes and the reduced expression of insecticide target genes were responsible for insecticide resistance [48][51]. Up to date, however, no universal and reliable reference genes were selected and evaluated in insects stressed with different classes of insecticides.

In the present work, a total of eight candidate reference genes were validated in the tobacco whitefly treated with eight commonly used insecticides for the control of this pest.

According to the final ranking order calculated by RefFinder, the five most stable reference genes for the eight tested insecticides treated whitefly were selected (Fig. 2A–H). Even for imidacloprid, acetamiprid and nitenpyram which belong to the same class of insecticides, the most stable reference genes were also different from each other (Fig. 2B–D). These results further proved that no single universal reference is available under different experiment conditions, and made the stability evaluation of reference gene necessary prior to the quantification of gene expression by qPCR.

Very interestingly, the relative expression level of two detoxifying enzymes, Cyp6cm1 and GST from each of eight insecticides treated B. tabaci groups showed no significant difference between calculations using the selected reference gene set for each insecticide and calculations using the selected reference gene set for all eight insecticides (EF1α, TUB1α and GADPH). Combined with the results of Li et al [22] that the expression of EF1α and GADPH was stable between the thiamethoxam (a neonicotinoid insecticide) susceptible and resistant B. tabaci strains, we recommended that our selected reference gene set (EF1α, TUB1α and GADPH) can be used as reliable internal reference for the data normalization in qRT-PCR experiments using B. tabaci treated with different insecticides.

Li et al [22] suggested that 18SrRNA was stably expressed in B. tabaci when treated with thiamethoxam or under different temperatures (4.0, 25.0, and 37.5°C). Based on the overall ranking by RefFinder, however, it was identified as the least stable reference gene in our study. When normalized with 18SrRNA, expressions of Cyp6cm1 and GST in B. tabaci treated with nitenpyram were significantly higher than those normalized with the set of most stable reference genes (Fig. 4I). These combined data strongly suggested the necessity of conducting customized reference gene selection for each and every experimental condition.

Supporting Information

Table S1.

Toxicity of eight insecticides to adults of Bemisia tabaci Mediterranean.

https://doi.org/10.1371/journal.pone.0087514.s001

(DOC)

Author Contributions

Conceived and designed the experiments: PL XZ XG. Performed the experiments: PL YG. Analyzed the data: PL YG. Contributed reagents/materials/analysis tools: XG. Wrote the paper: PL XZ.

References

  1. 1. Bustin S (2000) Absolute quantification of mRNA using real-time reverse transcription polymerase chain reaction assays. J Mol Endocrinol 25: 169–193.
  2. 2. Bustin S, Benes V, Nolan T, Pfaffl M (2005) Quantitative real-time RT-PCR-a perspective. J Mol Endocrinol 34: 597–601.
  3. 3. VanGuilder H, Vrana K, Freeman W (2008) Twenty-five years of quantitative PCR for gene expression analysis. Biotechniques 44: 619–626.
  4. 4. Citri A, Pang ZP, Südhof TC, Wernig M, Malenka RC (2012) Comprehensive qPCR profiling of gene expression in single neuronal cells. Nat Protoc 7: 118–117.
  5. 5. Bustin SA, Benes V, Garson J, Hellemans J, Huggett J, et al. (2009) The MIQE guidelines: Minimum information for publication of quantitative real-time PCR experiments. Clin Chem 55: 611–622.
  6. 6. Udvardi MK, Czechowski T, Scheible W-R (2008) Eleven golden rules of quantitative RT-PCR,. Plant Cell 20: 1736–1737.
  7. 7. Hugget J, Dheda K, Bustin S, Zumla A (2005) Real-time RT-PCR normalization; strategies and considerations. Genes and immunity 6 279–284.
  8. 8. Giménez MJ, Pistón F, Atienza SG (2011) Identification of suitable reference genes for normalization of qPCR data in comparative transcriptomics analyses in the Triticeae,. Planta 233 163–173.
  9. 9. Artico S, Nardeli SM, Brilhante O, Grossi-de-Sa MF, Alves-Ferreira M (2010) Identification and evaluation of new reference genes in Gossypium hirsutum for accurate normalization of real-time quantitative RT-PCR data,. BMC Plant Biol 10 49.
  10. 10. Derveaux S, Vandesompele J, Hellemans J (2010) How to do successful gene expression analysis using real-time PCR. Methods 50: 227–230.
  11. 11. Vandesompele J, De Preter K, Pattyn F, Poppe B, Van Roy N, et al. (2002) Accurate normalization of real-time quantitative RT-PCR data by geometric averaging of multiple internal control genes. Genome Biol 3: RESEARCH0034.
  12. 12. Coulson DTR, Brockbank S, Quinn JG, Murphy S, Ravid R, et al. (2008) Identification of valid reference genes for the normalization of RT qPCR gene expression data in human brain tissue. BMC Mol Biol 9: 46.
  13. 13. Tricarico C, Pinzani P, Bianchi S, Paglierani M, Distante V, et al. (2002) Quantitative real-time reverse transcription polymerase chain reaction: normalization to rRNA or single housekeeping genes is inappropriate for human tissue biopsies,. Anal Biochem 309: 293–300.
  14. 14. Lin YL, Lai ZX (2010) Reference gene selection for qPCR analysis during somatic embryogenesis in longan tree. Plant Sci 178: 359–365.
  15. 15. Cao S, Zhang X, Ye N, Fan X, Mou S, et al. (2012) Evaluation of putative internal reference genes for gene expression normalization in Nannochloropsis sp. by quantitative real-time RT-PCR. Biochemical and Biophysical Research Communications 421 (1) 118–123.
  16. 16. An Y, Reimers K, Allmeling C, Liu J, Lazaridis A, et al. (2012) Validation of differential gene expression in muscle engineered from rat groin adipose tissue by quantitative real-time PCR. Biochem Biophys Res Commun 421 (4) 736–742.
  17. 17. Van Hiel MB, Van Wielendaele P, Temmerman L, Van Soest S, Vuerinckx K, et al. (2009) Identification and validation of housekeeping genes in brains of the desert locust Schistocerca gregaria under different developmental conditions. BMC Mol Biol 10: 56.
  18. 18. Shen GM, Jiang HB, Wang XN, Wang JJ (2010) Evaluation of endogenous references for gene expression profiling in different tissues of the oriental fruit fly Bactrocera dorsalis (Diptera: Tephritidae). BMC Mol Biol 11: 76.
  19. 19. Ponton F, Chapuis M, Pernice M, Sword GA, Simpson SJ (2011) Evaluation of potential reference genes for reverse transcription-qPCR studies of physiological responses in Drosophila melanogaster. J Insect Physiol 57: 840–850.
  20. 20. Rajarapu SP, Mamidala P, Mittapalli O (2012) Validation of reference genes for gene expression studies in the emerald ash borer (Agrilus planipennis). Insect Sci 19 (1) 41–46.
  21. 21. Fu W, Xie W, Zhang Z, Wang S, Wu Q, et al. (2013) Exploring valid reference genes for quantitative real-time PCR analysis in Plutella xylostella (Lepidoptera: Plutellidae). Int J Biol Sci 9 (8) 792–802.
  22. 22. Li RM, Xie W, Wang SL, Wu QJ, Yang NN, et al. (2013) Reference Gene selection for qRT-PCR analysis in the sweetpotato whitefly, Bemisia tabaci (Hemiptera:Aleyrodidae). PLoS ONE 8 (1) e53006.
  23. 23. Cheng D, Zhang Z, He X, Liang G (2013) Validation of reference genes in Solenopsis invicta in different developmental stages, castes and tissues. PLoS One 8 (2) e57718.
  24. 24. Teng X, Zhang Z, He G, Yang L, Li F (2012) Validation of reference genes for quantitative expression analysis by real-time RT-PCR in four Lepidopteran Insects. J Insect Sci 12: 1–17.
  25. 25. De Barro PJ, Liu SS, Boykin LM, Dinsdale AB (2011) Bemisia tabaci: a statement of species status. Annu Rev Entomol 56: 1–19.
  26. 26. Ahmad M, Arif MI, Ahmad Z, Denholm I (2002) Cotton whitefly (Bemisia tabaci) resistance to organophosphate and pyrethroid insecticides in Pakistan. Pest Manag Sci 58: 203–208.
  27. 27. El Kady H, Devine GJ (2003) Insecticide resistance in Egyptian populations of the cotton whitefly, Bemisia tabaci (Hemiptera: Aleyrodidae). Pest Manag Sci 59: 865–871.
  28. 28. Horowitz AR, Kontsedalov S, Khasdan V, Ishaaya I (2005) Biotypes B and Q of Bemisia tabaci and their relevance to neonicotinoid and pyriproxyfen resistance. Arch. Insect Biochem. Physiol 58: 216–225.
  29. 29. Roditakis E, Roditakis NE, Tsagkarakou A (2005) Insecticide resistance in Bemisia tabaci (Homoptera: Aleyrodidae) populations from Crete. Pest Manag Sci 61: 577–582.
  30. 30. Luo C, Jones CM, Devine G, Zhang F, Denholm I, et al. (2010) Insecticide resistance in Bemisia tabaci biotype Q (Hemiptera: Aleyrodidae) from China. Crop Prot 29: 429–434.
  31. 31. Wang ZY, Yan HF, Yang YH, Wu YD (2010) Biotype and insecticide resistance status of the whitefly Bemisia tabaci from China. Pest Manag Sci 66: 1360–1366.
  32. 32. Zhang N, Liu C, Yang F, Dong S, Han Z (2012) Resistance mechanisms to chlorpyrifos and F392W mutation frequencies in the acetylcholine esterase ace1 allele of field populations of the tobacco whitefly, Bemisia tabaci in China. Journal of Insect Science 12: 41.
  33. 33. Yuan L, Wang S, Zhou J, Du Y, Zhang Y, et al. (2012) Status of insecticide resistance and associated mutations in Q-biotype of whitefly, Bemisia tabaci, from eastern China. Crop Protection 31: 67e71.
  34. 34. Byrne FJ, Gorman KL, Cahill M, Denholm I, Devonshire AL (2000) The role of B-type esterases in conferring insecticide resistance in the tobacco whitefly, Bemisia tabaci (Genn.). Pest Manag Sci 56: 867–874.
  35. 35. Rauch N, Nauen R (2003) Identification of biochemical markers linked to neonicotinoid cross resistance in Bemisia tabaci (Hemiptera: Aleyrodidae). Arch Insect Biochem Physiol 54: 165–176.
  36. 36. Feng Y, Wu Q, Wang S, Chang X, Xie W, et al. (2010) Cross-resistance study and biochemical mechanisms of thiamethoxam resistance in B-biotype Bemisia tabaci (Hemiptera: Aleyrodidae). Pest Manag Sci 66: 313–318.
  37. 37. Karunker I, Benting J, Lueke B, Ponge T, Nauen R, et al. (2008) Over-expression of cytochrome P450 CYP6CM1 is associated with high resistance to imidacloprid in the B and Q biotypes of Bemisia tabaci (Hemiptera: Aleyrodidae). Insect Biochem Mol Biol 38 (6) 634–44.
  38. 38. Karunker I, Morou E, Nikou D, Nauen R, Sertchook R, et al. (2009) Structural model and functional characterization of the Bemisia tabaci CYP6CM1vQ, a cytochrome P450 associated with high levels of imidacloprid resistance. Insect Biochem Mol Biol 39 (10) 697–706.
  39. 39. Scharlaken B, Graaf DC, de Goossens K, Brunain M, Peelman LJ, et al. (2008) Reference gene selection for insect expression studies using quantitative real-time PCR: the head of the honeybee, Apis mellifera, after a bacterial challenge. Journal of Insect Science (Tucson) 8: 33.
  40. 40. Lord JC, Hartzer K, Toutges M, Oppert B (2010) Evaluation of quantitative PCR reference genes for gene expression studies in Tribolium castaneum after fungal challenge. J Microbiol Methods 80: 219–221.
  41. 41. Liang P, Tian YA, Biondi A, Desneux N, Gao XW (2012) Short-term and transgenerational effects of the neonicotinoid nitenpyram on susceptibility to insecticides in two whitefly species. Ecotoxicology 21 (7) 1889–1898.
  42. 42. Pfaffl MW (2001) A new mathematical model for relative quantification in real-time RT-PCR. Nucleic Acids Res 29: e45.
  43. 43. Andersen CL, Jensen JL, Ørntoft TF (2004) Normalization of real-time quantitative RT-PCR data: a model-based variance estimation approach to identify genes suited for normalization, applied to bladder and colon cancer data sets. Cancer Res 64: 5245–5250.
  44. 44. Pfaffl MW, Tichopad A, Prgomet C, Neuvians TP (2004) Determination of stable housekeeping genes, differentially regulated target genes and sample integrity: BestKeeper-Excel-based tool using pair-wise correlations. Biotechnology Letters 26: 509–515.
  45. 45. Silver N, Best S, Jiang J, Thein SL (2006) Selection of housekeeping genes for gene expression studies in human reticulocytes using real-time PCR. BMC molecular biology 7: 33.
  46. 46. Bustin SA, Beaulieu J, Huggett J, Jaggi R, Kibenge F, et al. (2010) MIQE précis: Practical implementation of minimum standard guidelines for fluorescence-based quantitative real-time PCR experiments. BMC Mol Biol 11: 74.
  47. 47. Perry T, Batterham P, Daborn PJ (2011) The biology of insecticidal activity and resistance. Insect Biochem Mol Biol 41 (7) 411–22.
  48. 48. Wen Y, Liu Z, Bao H, Han Z (2009) Imidacloprid resistance and its mechanisms in field populations of brown planthopper, Nilaparvata lugens Stål in China. Pestic Biochem Physiol 94: 36–42.
  49. 49. Puinean AM, Foster SP, Oliphant L, Denholm I, Field LM, et al. (2010) Amplification of a cytochrome p450 gene is associated with resistance to neonicotinoid insecticides in the aphid Myzus persicae. PLoS Genet 6 (6) e1000999.
  50. 50. Bass C, Puinean AM, Andrews M, Culter P, Daniels M, et al. (2011) Mutation of a nicotinic acetylcholine receptor beta subunit is associated with resistance to neonicotinoid insecticides in the aphid Myzus persicae. BMC Neuroscience 12: 51.
  51. 51. Markussen MDK, Kristensen M (2010) Low expression of nicotinic acetylcholine receptor subunit Md alpha 2 in neonicotinoid-resistant strains of Musca domestica L. Pest Management Science 66 (11) 1257–1262.