Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Genotyping-by-Sequencing for Populus Population Genomics: An Assessment of Genome Sampling Patterns and Filtering Approaches

  • Martin P. Schilling,

    Affiliations Department of Biology, Utah State University, Logan, Utah, United States of America, Ecology Center, Utah State University, Logan, Utah, United States of America

  • Paul G. Wolf,

    Affiliations Department of Biology, Utah State University, Logan, Utah, United States of America, Ecology Center, Utah State University, Logan, Utah, United States of America

  • Aaron M. Duffy,

    Affiliation Department of Biology, Utah State University, Logan, Utah, United States of America

  • Hardeep S. Rai,

    Affiliation Department of Wildland Resources, Utah State University, Logan, Utah, United States of America

  • Carol A. Rowe,

    Affiliation Department of Wildland Resources, Utah State University, Logan, Utah, United States of America

  • Bryce A. Richardson,

    Affiliation Rocky Mountain Research Station, USDA Forest Service, Provo, Utah, United States of America

  • Karen E. Mock

    karen.mock@usu.edu

    Affiliations Department of Wildland Resources, Utah State University, Logan, Utah, United States of America, Ecology Center, Utah State University, Logan, Utah, United States of America

Abstract

Continuing advances in nucleotide sequencing technology are inspiring a suite of genomic approaches in studies of natural populations. Researchers are faced with data management and analytical scales that are increasing by orders of magnitude. With such dramatic advances comes a need to understand biases and error rates, which can be propagated and magnified in large-scale data acquisition and processing. Here we assess genomic sampling biases and the effects of various population-level data filtering strategies in a genotyping-by-sequencing (GBS) protocol. We focus on data from two species of Populus, because this genus has a relatively small genome and is emerging as a target for population genomic studies. We estimate the proportions and patterns of genomic sampling by examining the Populus trichocarpa genome (Nisqually-1), and demonstrate a pronounced bias towards coding regions when using the methylation-sensitive ApeKI restriction enzyme in this species. Using population-level data from a closely related species (P. tremuloides), we also investigate various approaches for filtering GBS data to retain high-depth, informative SNPs that can be used for population genetic analyses. We find a data filter that includes the designation of ambiguous alleles resulted in metrics of population structure and Hardy-Weinberg equilibrium that were most consistent with previous studies of the same populations based on other genetic markers. Analyses of the filtered data (27,910 SNPs) also resulted in patterns of heterozygosity and population structure similar to a previous study using microsatellites. Our application demonstrates that technically and analytically simple approaches can readily be developed for population genomics of natural populations.

Introduction

Genetic studies of natural populations have traditionally relied on low numbers of loci to make inferences about evolutionary and demographic processes at various temporal and spatial scales. However, recent advances in sequencing chemistry, sequencing platforms, data storage, and computational processing are enabling the efficient collection of data from thousands to hundreds of thousands of loci from multiple individuals [1]. The ability to sample genomes densely at the population level is leading to a rapid radiation of analytical and bioinformatic approaches for population genomics. These approaches will greatly increase our understanding of evolutionary, demographic, and adaptive mechanisms operating in populations, and how these processes vary across the entire genome. The scales of these datasets and analyses present new challenges, including various types of chemical and technical biases, sequencing errors, and genotyping errors, all of which can be inadvertently propagated and magnified through data handling pipelines. The characterization and appropriate treatment of these biases and error sources is a critical aspect of these emerging approaches to population genomics.

One of the most exciting developments in population genomics is the development of various reduced-representation protocols, collectively referred to as Genotyping-by-Sequencing (GBS), which allow sequencing of a subset of the genome through selective amplification of restriction fragments [2][6]. The individual-specific oligonucleotide barcoding of these sequence libraries allows high-level multiplexing followed by bioinformatic recovery of individual identities. GBS protocols are being actively modified to optimize library and fragment sizes [7][10], and open-source software is becoming available for genotyping using GBS data (Universal Network Enabled Analysis Kit: UNEAK) [11][13]. However, the empirical effects of various library preparation and filtering techniques associated with GBS have only been explored in a very limited number of systems [7], [14][18]. As GBS protocols develop into mainstream tools for population-level analyses, such empirical studies of inherent errors and biases are increasingly important. In this study, we explore the effects of library preparation using methylation-sensitive restriction enzymes following Elshire et al. [10], and assess the impacts of various data filtering techniques on locus numbers, genotype assignment and population metrics.

One potentially problematic issue with GBS analyses is the large proportion of repetitive elements in complex plant and animal genomes. Sequences from repetitive regions can consume sequencing capacity without increasing information content in population analyses. The GBS approach described by Elshire et al. [10] was developed to minimize the selection of repetitive genomic regions by using a methylation-sensitive restriction enzyme (ApeKI). The Elshire et al. [10] technique has been used successfully in a variety of genetic mapping, population structure, and genomic selection studies in model and non-model plant species [7], [10], [12]. However, the empirical bias toward non-repetitive genomic sites has not been demonstrated in species other than a few grasses [19]. Because methylation patterns may vary among taxa, resulting in different patterns of bias, we sought to describe the patterns of genome sampling using ApeKI in a eudicot. We performed this analysis using tissue from the Populus trichocarpa clone ‘Nisqually-1’; the individual clone used to assemble the first complete annotated genome in a forest tree (genome size 485 million bp) [20]. Specifically, we sought to determine: a) whether the use of ApeKI following the Elshire et al. [10] protocol resulted in a bias toward coding regions relative to in silico digests (which would be agnostic to methylation), and b) whether sampling across genomic regions was relatively even. Using several biological replicates of the Nisqually-1 clone, we also sought to describe c) the frequency with which particular genome sites are sampled across replicates, and d) the relationship between sequencing depth and genome sampling intensity.

Another issue with GBS analyses is accounting for variation in coverage depth and sequence read quality in individual genotyping and population allele frequency estimation [16], [21][24]. Two general approaches are emerging for the handling of GBS data. One approach is to use all the data regardless of quality and then to use Bayesian probabilities based on sequence quality and depth throughout the analytical pipeline [24][26]. In this method, a fixed genotype is not strictly assigned to an individual, but their probabilities are considered throughout any downstream analyses. An alternative is to filter out data of low quality and loci of low read depth before performing population genetic analyses. This approach has the advantage of being less computationally intensive since genotypes are assigned, and the data substantially reduced early in the analytical pipeline. Here we assess how filtering loci using this second approach affects both genotype assignment and population structure metrics. We explored three different filtering strategies based on specific thresholds for minor allele frequencies and read depth. We compare the behavior of these filters with respect to the number of loci retained, estimates of individual and population-level heterozygosity, Hardy-Weinberg equilibrium, and measures of population subdivision.

To assess the impact of various data filtering strategies, we chose trembling aspen (Populus tremuloides) because of its close relationship to P. trichocarpa [27] and its remarkably broad longitudinal and latitudinal distribution [28]. The distribution of this species across many different ecological gradients makes it an excellent candidate for future population genomic studies of adaptation and climate change effects. Populus tremuloides consists of two major genetic clusters: one in Canada and the northern U.S. (N cluster) and another in the western U.S. (SW cluster) [29]. This allows us to assess the effectiveness of GBS to detect population differentiation at multiple scales. The samples used in this study come from 6 populations representing both major clusters, and the output from various filtering strategies were compared with the output from previous microsatellite analysis of the same populations [29].

Materials and Methods

Sample acquisition and library preparation

Plant material and genomic DNA isolation.

For assessment of gene sampling in GBS, we obtained leaf material from a clone of Nisqually-1, the P. trichocarpa genotype used for genome sequencing as part of the Populus genome project [20]. For population studies, we sampled P. tremuloides genets from each of 6 populations, including four from the N cluster: FLFL (Flin Flon, Manitoba, Canada, n = 16), HSPQ (Havre-St.-Pierre, Quebec, Canada, n = 20), MI (Ontonagon County, Michigan, USA, n = 20), SFQ (Saint-Felicien, Quebec, Canada, n = 20), and two populations from the SW cluster: KFO (Klamath Falls, Oregon, USA, n = 12), and WWA (Kittitas County, Washington, USA, n = 19) [29]. Dried leaf tissue was ground in a Tissuelyser II (Qiagen Inc., Valencia, CA) with tungsten carbide beads. DNA extraction was performed using a Qiagen DNeasy Plant kit (Qiagen Inc., Valencia, CA). The final DNA product was eluted twice from each column into 60 µL and 30 µL of AE buffer, respectively. The genomic DNA was quantified using a Qubit fluorometer (Invitrogen, Carlsbad, CA).

Library preparation and high-throughput sequencing.

For both P. trichocarpa (Nisqually-1) and P. tremuloides samples, genomic libraries were prepared following Elshire et al. [10] with the methylation-sensitive restriction enzyme ApeKI and custom adapters and barcodes. For P. trichocarpa, 16 uniquely barcoded GBS genomic libraries (replicates) were constructed using the same DNA extraction. For P. tremuloides, uniquely barcoded ApeKI libraries consisted of 152 samples representing 107 individuals. Forty-five of the samples were replicates: 18 individuals run in duplicate, and three individuals run in triplicate, all from common DNA extractions. Illumina high-throughput sequencing was performed at the Vanderbilt University Medical Center, on an Illumina HiSeq 2000 using 100 bp single-end indexing runs. The samples were sequenced across two Illumina lanes. Base calling was performed in Casava v1.8 (Illumina, San Diego, CA).

Read sorting.

For both the Nisqually-1 and P. tremuloides samples, index (barcode) deconvolution was done using a custom Perl script to sort each of the GBS barcoded samples into separate fastq files. The individual raw read files (fastq) were imported into CLC Genomics Workbench (v4.9; CLC Bio, Cambridge, MA) and further processed for quality and length (trimmed using quality scores with a limit set to 0.05; discarded reads less than 30 bp). The enzyme recognition sequence was removed from the 5′ end of each raw sequence read after quality trimming.

Assessment of coding regions sampled in reference genome

Each of the 16 Nisqually-1 replicated libraries, consisting of single-end trimmed reads, was individually aligned to the P. trichocarpa v2 assembly (∼403 Mb arranged in 19 chromosomes, assembled into 2518 scaffolds; Phytozome v8.0) using CLC Genomics Workbench (v4.9; CLC Bio, Cambridge, MA). The maximum gap and mismatch count were set to 2, and insertion and deletion costs were set to 3, with a minimum contig length of 200 bp. Length fraction and similarity parameters were set to 0.6 and 0.8, respectively. We used the above assembly to determine whether each GBS read was or was not within an annotated gene on the P. trichocarpa genome.

To determine whether observed GBS loci occurred randomly across the ApeKI sites known to occur in each of the genomic scaffolds, we conducted a chi-square test comparing the number of observed vs. expected GBS loci. We calculated the expected number of GBS loci in each scaffold by multiplying the total in silico number of ApeKI-containing genes (40,666) by the overall proportion of these genes that was sampled by GBS (34,750 or 85%). Only scaffolds containing more than five ApeK1 sites (83 of a total of 998 ApeKI-containing scaffolds) were used in this analysis.

To explore the effect of increasing read depth on genome coverage, we sequentially added individual P. trichocarpa (Nisqually-1) replicates, and counted the accumulating total number of sites sampled. We randomly ordered the replicates and averaged the effect over 1000 permutations. We acknowledge that accumulating replicates in this fashion is not technically equivalent to reducing the level of multiplexing in a single run, given that different sequencing runs have different error profiles. Our goal here was to estimate the effect of multiplexing level using a proxy.

Assessment of data filtering strategies in P. tremuloides

UNEAK pipeline.

For P. tremuloides samples, single nucleotide polymorphism (SNP) genotypes were assigned using the UNEAK (Universal Network Enabled Analysis Kit) filter [12] with default settings. This pipeline was designed for taxa for which no reference genome is available, which is currently the case for P. tremuloides. Using Illumina sequence reads, the network filter in UNEAK trimmed reads to 64 bp to minimize the effects of sequencing error, and enabled efficient storage of data in bit format. Identical reads are then collated as haplotypes (referred to as tags by Lu) [12]. Haplotype pairs differing by a single nucleotide were retained as SNPs. Any SNP with a read depth >127 was removed, to eliminate loci that have multiple genomic copies. Those SNPs with a minor allele frequency <0.05 were removed to minimize the impact of sequencing errors [12].

Post-UNEAK pipeline.

Prior to the application of alternative filtering strategies, we applied two functions that removed all SNPs (rows) and then samples (columns) containing 90% or more ‘N’ values (indicating that neither allele is designated). These Ns represent individuals where the allele cannot be called from the sequence reads. This is either because no read is available at this site (for this individual) or the sequence quality is too low to call. Because we are attempting to retrieve SNPS for population genetic analysis, we apply this early filter to remove loci and individuals that contain very low levels of information prior to further filtering.

We used custom Python scripts (available at https://github.com/schimar/gbs) to read the UNEAK output files and to apply three different filters (Fig. 1). The Threshold Filter (TF) discards all SNPs having a total read depth of less than four (default threshold value). Using the TF, SNPs with 4–7 (and >7) identical reads are scored as a homozygote. A potential problem with this approach is that a heterozygote call would require four reads of each allele, but a homozygote call requires only four reads. I.e. to be ‘fair’ we should require 2×4 = 8 reads to call a homozygote. Our Ambiguity Filter (AF) handles this by assigning an unknown (‘?’) to the second allele in cases where the read depth is 4–7. Thus, a total of 8 reads containing an ‘A’ at a SNP locus would be assigned a homozygous genotype ‘AA’, whereas a total of 4–7 reads containing ‘A’s would be assigned a genotype ‘A?’. The Minor Allele Frequency Filter (MAFF) assigns homo- or heterozygous genotypes based on the allele frequency of the minor allele, with a threshold of 0.45. Therefore, the MAFF does not discard alleles from genotypes based solely on low read depths. After filtering, we repeated the exclusion of SNPs with 90% or more ‘N’ values. At this point, we have a matrix of individuals x SNP genotypes. From this we counted the total number of cells that were homozygous, heterozygous, and ambiguous.

thumbnail
Figure 1. Graphical representation of our three filtering schemes, with examples of how some genotypes are interpreted.

Orange boxes denote alleles that are filtered (converted to ‘N’) and pink denotes alleles that are converted to ambiguous (‘?’).

https://doi.org/10.1371/journal.pone.0095292.g001

Genotype Mismatch rates.

For each filtering strategy, we assessed the frequency of allelic mismatches across replicated samples. Thus, if a genotype is ‘GA’ in one replicate and ‘GG’ in the other this counts as one difference (a single mismatch), whereas ‘GG’ versus ‘AA’ is two differences (a double mismatch). Ambiguous alleles (coded as ‘?’) and unknown (‘N’) alleles were not included as mismatches. We report mismatch rates as the proportion of alleles differing among all alleles in the matrix (i.e., 2 x the number of SNPs). We anticipated that low read depths would contribute to mismatches by increasing allelic dropout and by increasing error rates in base calling. To test this hypothesis we compared read depths between replicated pairs in which one sample was a heterozygote and the other was a homozygote (i.e. allelic dropout) and assessed the read depth difference between each pair using a Wilcoxon signed rank test. Further, we tested the read depth difference between mismatched homozygous samples and matched homozygous samples, using a Mann-Whitney test.

Filtering effects on population parameters.

For population analyses, we represented each replicated individual once, choosing the individual with the greatest overall read depth. For the unfiltered data, as well as those from all 3 filters, we used the Python HWE exact test [30] to calculate HWE probabilities for each SNP and population. For each filter, locus-specific HWE probabilities were pooled across populations, and results summarized as violin plots. One of the six populations (KFO) was excluded from this analysis because of low sample numbers for estimating p(HWE).

Using the output from each filter, we calculated FST values among populations, along with mean observed heterozygosity (Ho) and estimated heterozygosity (Hs) for each population, averaged across populations, using the R packages adegenet [31], [32] and hierfstat [33]. Ambiguous alleles were treated as missing data in these analyses. In previous population genetic studies of aspen, pronounced subdivision was detected between northern (including FLFL, HSPQ, MI and SFQ) and western populations (including KFO and WWA) using microsatellite markers [29]. To test whether this same pattern was evident in the GBS data, we explored relative patterns of FST in SNPs and msat loci from the same populations.

Results

SNP data for this project are publicly available, in hapmap format, from the Dryad repository: http://dx.doi.org/10.5061/dryad.2cs4g.

Assessment of coding regions sampled by GBS using ApeKI

We used the P. trichocarpa genome to study the genomic patterns and distribution of regions captured by the GBS technique. There are 462,987 ApeKI in silico restriction sites in the P. trichocarpa (Nisqually-1) genome. Of those, 212,376 (45.9%) are within annotated gene boundaries. By contrast, in our 16 GBS replicates of P. trichocarpa, sequence reads were recovered from a mean of 125,022 ApeKI sites (loci) per replicate (27% of in silico restriction sites) (s.e. 6,363), of which 87,202 (69.8%) (s.e. 4,289) were within annotated genes. Thus, our use of ApeKI consistently captured loci within annotated genes more frequently than one would expect by chance alone (P<<0.005 according to a simple contingency test).

Pooling results from all 16 replicates, we found that 84% of all annotated genes in the P. trichocarpa genome were represented in the GBS library. The number of annotated genes within genomic regions (scaffolds) sampled by GBS was not significantly different from a random subset of the genes present (P = 0.61), indicating that GBS sampled these regions evenly.

Across the 16 P. trichocarpa replicates, we detected 334,158 loci. On average, 26% of these loci were detected in only one of the 16 replicates, and 9.6% were detected in all 16 replicates. The cumulative distribution of locus numbers over replicates (Fig. 2) indicated that although at 16 replicates we are approaching an asymptote, the graph is not yet leveled. Thus, although we can detect more loci by reducing the level of multiplexing, the returns are diminishing.

thumbnail
Figure 2. Effect of the number replicates on the number of unique regions (loci) captured by GBS in P. trichocarpa.

We performed 1000 permutations, each with a random order of adding the 16 replicates.

https://doi.org/10.1371/journal.pone.0095292.g002

Assessment of SNP filters in P. tremuloides populations

From the 152 barcoded samples in our study, we obtained a total of 23 billion bp of sequence from 289 million reads, for an average of 1.9 million sequence reads per sample. After removal of SNPs with a minor allele frequency <0.05, we had 160,183 SNPs for further analysis. The mean number of reads per individual was 45,149 (s.e. 850), and the mean number of reads retained by UNEAK per sample was 220,872 (s.e. 6674). After removing samples and SNPs with more than 90% ‘N’, the dataset consisted of 108,530 SNPs representing 101 individuals (FLFL: 16; HSPQ: 20; KFO: 6; MI: 20; SFQ: 20; WWA: 19) and 39 replicates. This dataset was subjected to the three different filters (TF, AF, MAFF). The MAFF dataset retained all 140 samples and 74,159 SNPs, whereas TF and AF datasets each retained 140 samples and 27,910 SNPs. The total numbers of ‘NN’ (unassigned) genotypes for each filter was 35628 (no filter and MAFF) and 11,929 (AF and TF).

The proportions of homozygous and heterozygous genotypes at each SNP are shown for each filter in Fig. 3. Prior to application of our filters, 26% of the SNP/individual combinations were assigned a genotype, of which of 9% were heterozygous and 91% were homozygous SNPs. The proportion of heterozygous genotypes was reduced by all filters (to 6.9% for both TF and AF and 2% for MAFF). This result indicates that all three filters are removing alleles contributing to observed heterozygosity.

thumbnail
Figure 3. Pooled distribution of genotypes for unfiltered and filtered SNP data for P. tremuloides.

https://doi.org/10.1371/journal.pone.0095292.g003

Mismatches across replicated samples at each SNP were calculated for each filtered data set (Fig.4). In the unfiltered dataset, the mismatch rate was 1.8%, TF was 1.95%, AF was 1.65%, and MAFF was 1.97%. Mismatch rates did not differ greatly across populations (data not shown), but there was variance across replicate pairs compared, with mismatches ranging from 0.04% in the AF to 6.3% in the unfiltered data. Overall, it appeared that filtering, especially the AF, reduced the mismatch rates. Mismatches in each category are shown in Fig 3. With unfiltered data, in mismatched pairs involving allelic dropout in one sample, the homozygote had the lowest read depth in 79.1% of cases. The average read depth in these mismatches was 4.15 for the homozygote and 7.40 for the heterozygote (p<<0.001). In mismatched pairs involving two homozygotes, the average read depth (pooling across all replicates) was 1.21, while the average read depth for matched homozygote replicates was 2.70 (p<<0.001).

thumbnail
Figure 4. Numbers of matches, single mismatches (e.g., AA versus AT), double mismatches (e.g., AA versus TT) and ambiguous differences between replicates for unfiltered and filtered SNP data.

Comparisons that include (‘NN’) genotypes are not included here.

https://doi.org/10.1371/journal.pone.0095292.g004

The distribution of population- and SNP-specific HWE probabilities, averaged across populations, is presented for each filtering approach (Fig. 5). The differences among the filters were similar across all populations (data not shown). In all cases, including no filtering, there was a bimodal distribution of HWE probability values. The MAFF had the lowest percentage of HWE probabilities >0.05 (57%), whereas AF had the highest (95%). This increase using the AF was due to a reduction in SNPs with observed heterozygote deficiencies relative to HWE expectations (Table 1).

thumbnail
Figure 5. Violin plot for pooled results of Hardy-Weinberg exact testing for each SNP per population.

Tests for all populations have been pooled for each filter (x-axis) and probability-values of the exact test (y-axis). The proportions of tests with probabilities above 0.05 (horizontal line) are shown for all 4 filters. White dots show the median, bottom and top of the boxes show lower and upper quartiles, respectively, and “fins” illustrate the density of observations across the entire range of probability values. Note that the numbers of tests differ for each filter (see text).

https://doi.org/10.1371/journal.pone.0095292.g005

thumbnail
Table 1. Mean observed heterozygosity (HO), mean expected heterozygosity (HS), FST across all populations, and mean FST between pairs of populations of P. tremuloides between and within the two major geographic regions in North America.

https://doi.org/10.1371/journal.pone.0095292.t001

The patterns of population differentiation were not dramatically impacted by the choice of filter sets. In all cases, the average pairwise FST value between pairs of populations was greater between previously described genetic groups (N and SW clusters) than within each of these groups. These patterns were consistent with results from the same populations using 8 nuclear microsatellite loci. A ten-fold difference in pairwise FST values between vs. within major groups was noted with microsatellite data, the unfiltered, the AF, and MAFF data (Table 1).

Discussion

The genus Populus is rapidly becoming a model study system for the examination of several aspects of forest tree biology [34] and adaptation to climate change [35][38]. One of the benefits of working with Populus is that the genus includes P. trichocarpa, which was the first tree species to have its genome sequenced and assembled [20]. This annotated genome provides a wealth of resources for further study in the genus [39]. Populus tremuloides (aspen), for example, has the broadest geographic range of any North American tree species [40] and has tremendous ecological, economic, and aesthetic value, particularly in the western portion of its range [41]. Thus, P. tremuloides lends itself to studies of local adaptation and evolutionary history, tractable by GBS.

Here we explored two aspects of using GBS in Populus species: the bias toward coding regions when using GBS with a methylation-sensitive restriction enzyme (in P. trichocarpa), and the effect of various data filtering strategies on population data (in P. tremuloides).

Assessment of coding regions sampled by GBS using ApeKI

When we examined our data relative to the fully sequenced P. trichocarpa genome (Nisqually-1), we found that ApeKI increases sampling of annotated genes relative to that expected by chance alone. Previous studies have shown that ApeKI preferentially cuts at nonmethylated sites [42], which in most eukaryotic genomes are more likely to be coding regions [43]. This bias occurs even though not all methylation occurs in noncoding regions and the methylation preferences of the enzyme are not strict. The Populus genome is relatively small (410 Mb) [20] so a relatively large proportion of the genome is coding. Therefore, we would expect that in a larger genome the selection for coding regions might be even more pronounced. Thus, for researchers interested in population genomics specifically of coding regions (such as selection or association studies), ApeKI seems to be an ideal choice. Concomitantly, if questions require information about all genomic regions, irrespective of coding status, then a different endonuclease should be used.

The distribution of GBS loci (regardless of the presence of SNPs) of the P. trichocarpa genome assembly suggests that the regions captured by the GBS technique are randomly distributed across the scaffolds, although the large size of many of the scaffolds may obscure some within-scaffold clustering. Thus, we have good reason to believe that SNP loci captured by GBS (using ApeKI) provide a representative sample of the genome.

Of the approximately 410 Mb in the P. trichocarpa genome assembly [20], about 11% of the genome would be sampled if all ApeKI sites were captured by GBS. This value is 8% when pooling all 16 of our P. trichocarpa replicates, and 3% for any one replicate. These percentages would drop correspondingly for larger genomes, and they can be modified by controlling read depth via the level of multiplexing.

Assessment of data filtering strategies in P. tremuloides populations

Filtering of P. tremuloides SNP data.

In any research project that entails a sampling of variables, it is ideal to retain those variables that are informative for the questions at hand. In the case of population genetics based on allele frequency estimates, informative loci are those for which genotypes can be assigned most accurately. Thus, our goal in filtering was to retain as many of those SNP loci as possible. In our GBS study of P. tremuloides, the method of filtering had a large effect on some downstream analyses, particularly those influenced by homozygosity. Determining which filters are retaining useful data and which filters are generating artifacts can be difficult. Fortunately, we have independent data for P. tremuloides indicating that populations are generally in HWE [29], [44][46], as would be expected for a wind-pollinated tree species. Unfiltered SNPs resulted in the inclusion of many that were not in HWE, most of which were deficient in heterozygotes. A simple threshold filter (TF) did not improve this situation appreciably, nor did a filter that evaluated SNPs based on the allele ratios (MAFF). The AF appeared to retain more SNPs in HWE, suggesting that this filter may result in the most accurate estimate of heterozygosity. The AF filter assigns ambiguous alleles depending on the read depth of the second allele. Therefore, we speculate that this filter results in more accurate genotyping of the SNPs retained. Determining whether this filter is generally optimal will require more data from more species. Also critical is that, in general, a more refined filter may result in a higher proportion of useful SNPs, but it will usually result in overall fewer loci, a trade-off that needs to be addressed specifically in each study. Combining multiple filtering steps should also be explored as a means of obtaining more accurate estimates of genotype.

Effect of filtering strategies on population parameters.

Populations of P. tremuloides tended to show only low levels of differentiation (Table 1). However, using GBS, we detected two genetically distinct clusters of aspen populations; the same clusters that have been detected using microsatellite data [29]. Pairwise FST values using different marker types and different loci are difficult to compare directly, since they can be influenced by locus-specific polymorphism [47]. However, we suspect that with the MAFF and TF filters, as well as with unfiltered data, many more SNPs were retained in which read depths were too low to detect another allele, thereby overestimating homozygosity. The values of both observed and expected heterozygosity using microsatellites exceeded values from all other filter types, a result expected due to high allelic richness.

Assessment of genotyping error.

Errors and biases are not new to genotyping. Prior to genotyping based on reduced representation libraries, scoring errors [49] and errors associated with Sanger sequencing and PCR were recognized [48], [50], although routine assessment of error rates has not become common [15], [51][53]. Given that next generation sequencing (NGS) does not entail manual scoring of genotypes, which can suffer from subjectivity [49], using automated clustering and filtering schemes allows more objectivity, both in how we choose the markers for genotyping and in actually genotyping them. However, automated genotyping, clustering, and filtering techniques can also result in systematic biases and a high frequency of errors, particularly errors related to coverage depth, as demonstrated here.

Because we did not know the true genotype for each SNP for each individual, we assessed genotyping error indirectly by comparing replicated samples, and reporting mismatch rates. Overall, the AF had the lowest mismatch rates, consistent with its behavior in population genetic analyses. The source of mismatches is unknown, but our analyses suggest that higher mismatch rates among replicates are associated with low read depth. We expect that low read depth would cause allelic dropout in heterozygotes and increased base-calling error in both homozygotes and heterozygotes. Determining the factors that contribute to mismatches can help researcher to minimize error rates, although methods to assess errors in NGS studies are not consistent [48], which can make it difficult to compare among studies. Reducing error rates is particularly critical for some types of studies, e.g. those that involve assessment of parentage, individual identity, or locus-specific effects. Thus, understanding the effect of different data filters (of any type) on error rates is an important component of working with NGS data.

Tradeoffs between depth and coverage.

For a taxon with no reference genome, any exploration into population genomics requires a complex assessment of how to multiplex samples optimally. The strategy chosen will ultimately affect how many SNPs can be used. But the amount of data can also be controlled by the use (or lack) of filtering systems. In general, we expect that filters that are more stringent will retain fewer usable SNPs, as we noted in our results (Fig. 3). Buerkle and Gompert [24] advocate using the maximum number of SNPs (no strict filtering), retaining those even with minimal coverage: as low as 1 read per SNP per individual. This approach is particularly appropriate for studies that examine the variance in population parameters (such as FST outlier analyses) across SNPs, where maximizing loci is critical. However, for basic questions of population structure, filtering to retain informative data might be a more efficient strategy. Thus, depending on the organism and study question, it may well be worth assessing the optimal level of multiplexing for GBS, to control read depth and number of SNPs. Note that even for the small Populus genome, it appears that we sampled a small proportion of available SNPs with our level of multiplexing. Additional SNPs could be sampled if we reduced the level of multiplexing. However, the approach to an asymptote (Fig. 2) suggests diminishing returns. More importantly, the level of multiplexing we used for P. tremuloides was still sufficient to detect over 100,000 polymorphic SNPs. Even in the P. trichocarpa replicates, where only 9.6% of the loci were found among all replicates, these amounted to 32,080 loci, which would certainly be sufficient for population-level analyses of gene flow patterns, even with moderately low levels of polymorphism. To increase the overall read depth and level of overlap across samples further, it would be necessary to reduce the level of genome sampling. This can be achieved through various approaches including size selection of genome fragments [14].

Conclusions

Several versions of NGS applications are becoming available for the study of population genomics, along with a variety of approaches to analyzing the resulting large-scale data. As these new techniques emerge, assessment of the impacts of various methods for sample processing, reduction and selection of genome representation, and compiling sequence data into population-scale genotypic data are becoming an important developmental phase [54], [55]. Here we apply a technically simple NGS approach (GBS) to samples from natural populations, present an assessment of how the genome of a related species is sampled with this technique, and explore an analytical framework that provides simple genotype data that are ready for traditional population genetic analyses. We demonstrate that the use of the restriction enzyme ApeKI results in a bias for coding regions, even in a species that is not closely related to the species in which the method was first developed (e.g. Zea mays) [10]. This finding confirms the utility of GBS for analyzing differences in coding regions at the population level (e.g. for association studies). Our analysis of replicates provides insights about the trade-off between multiplexing depth and genome coverage. We also present several different data filtering approaches and show that the choice of approach can have a pronounced effect on error rates and on population parameters such as allele frequencies and HWE. We encourage researchers who are shifting to NGS population approaches to explore genotyping error rates and allele frequency distributions to understand better the potential biases that accompany various data filtering methods.

Acknowledgments

We thank Drs. Quentin Cronk and Armando Geraldes (U. British Columbia) for providing tissue and DNA from a Nisqually-1 (Populus trichocarpa) clone. Drs. Richard Cronn and Brian Knaus for technical support.

Author Contributions

Conceived and designed the experiments: KEM PGW HSR BAR. Performed the experiments: HSR CAR. Analyzed the data: MPS PGW AMD KEM. Wrote the paper: MPS KEM PGW.

References

  1. 1. Lόpez Herráez DL, Bauchet M, Tang K, Theunert C, Pugach I, et al. (2009) Genetic variation and recent positive selection in worldwide human populations: evidence from nearly 1 Million SNPs. PLoS ONE 4: e7888.
  2. 2. Altshuler D, Pollara VJ, Cowles CR, Van Etten WJ, Baldwin J, et al. (2000) An SNP map of the human genome generated by reduced representation shotgun sequencing. Nature 407: 513–516.
  3. 3. van Orsouw NJ, Hogers RCJ, Janssen A, Yalcin F, Snoeijers S, et al. (2007) Complexity Reduction of Polymorphic Sequences (CRoPS (TM)): a novel approach for large-scale polymorphism discovery in complex genomes. PLoS ONE 2: e1172.
  4. 4. Van Tassell CP, Smith TPL, Matukumalli LK, Taylor JF, Schnabel RD, et al. (2008) SNP discovery and allele frequency estimation by deep sequencing of reduced representation libraries. Nature Methods 5: 247–252.
  5. 5. Narum SR, Buerkle CA, Davey JW, Miller MR, Hohenlohe PA (2013) Genotyping-by-sequencing in ecological and conservation genomics. Molecular Ecology 22: 2841–2847.
  6. 6. Baird NA, Etter PD, Atwood TS, Currey MC, Shiver AL, et al. (2008) Rapid SNP discovery and genetic mapping using sequenced RAD markers. PLoS ONE 3: e3376.
  7. 7. Poland JA, Rife TW (2012) Genotyping-by-Sequencing for Plant Breeding and Genetics. Plant Genome 5: 92–102.
  8. 8. Gompert Z, Forister ML, Fordyce JA, Nice CC, Williamson RJ, et al. (2010) Bayesian analysis of molecular variance in pyrosequences quantifies population genetic structure across the genome of Lycaeides butterflies. Molecular Ecology 19: 2455–2473.
  9. 9. Peterson BK, Weber JN, Kay EH, Fisher HS, Hoekstra HE (2012) Double digest RADseq: an inexpensive method for de novo SNP discovery and genotyping in model and non-model species. PLoS ONE 7: e37135.
  10. 10. Elshire RJ, Glaubitz JC, Sun Q, Poland JA, Kawamoto K, et al. (2011) A robust, simple Genotyping-by-Sequencing (GBS) approach for high diversity species. PLoS ONE 6: e19379.
  11. 11. Glenn TC (2011) Field guide to next-generation DNA sequencers. Molecular Ecology Resources 11: 759–769.
  12. 12. Lu F, Lipka AE, Glaubitz J, Elshire R, Cherney JH, et al.. (2013) Switchgrass genomic diversity, ploidy, and evolution: novel insights from a network-based SNP discovery protocol. PLOS Genetics 9..
  13. 13. Catchen J, Amores A, Hohenlohe P, Cresko W, Postlethwait J (2011) Stacks: building and genotyping loci de novo from short-read sequences. G3: Genes, Genomes, Genetics 1: 171–182.
  14. 14. Hohenlohe PA, Bassham S, Etter PD, Stiffler N, Johnson EA, et al. (2010) Population genomics of parallel adaptation in threespine stickleback using sequenced RAD tags. PLoS Genetics 6: e1000862.
  15. 15. Nielsen R, Korneliussen T, Albrechtsen A, Li YR, Wang J (2012) SNP calling, genotype calling, and sample allele frequency estimation from new-generation sequencing data. PLoS ONE 7: e37558.
  16. 16. Arnold B, Corbett-Detig RB, Hartl D, Bomblies K (2013) RADseq underestimates diversity and introduces genealogical biases due to nonrandom haplotype sampling. Molecular Ecology 22: 3179–3190.
  17. 17. Davey JW, Hohenlohe PA, Etter PD, Boone JQ, Catchen JM, et al. (2011) Genome-wide genetic marker discovery and genotyping using next-generation sequencing. Nature Reviews Genetics 12: 499–510.
  18. 18. Gautier M, Gharbi K, Cezard T, Foucaud J, Kerdelhue C, et al. (2013) The effect of RAD allele dropout on the estimation of genetic variation within and between populations. Molecular Ecology 22: 3165–3178.
  19. 19. Poland JA, Brown PJ, Sorrells ME, Jannink JL (2012) Development of high-density genetic maps for barley and wheat using a novel two-enzyme genotyping-by-sequencing approach. PLoS ONE 7: e32253.
  20. 20. Tuskan GA, Difazio S, Jansson S, Bohlmann J, Grigoriev I, et al. (2006) The genome of black cottonwood, Populus trichocarpa (Torr. & Gray). Science 313: 1596–1604.
  21. 21. Nielsen R, Paul JS, Albrechtsen A, Song YS (2011) Genotype and SNP calling from next-generation sequencing data. Nature Reviews Genetics 12: 443–451.
  22. 22. Gore MA, Wright MH, Ersoz ES, Bouffard P, Szekeres ES, et al. (2009) Large-scale discovery of gene-enriched SNPs. Plant Gen 2: 121–133.
  23. 23. Beissinger TM, Hirsch CN, Sekhon RS, Foerster JM, Johnson JM, et al. (2013) Marker density and read depth for genotyping populations using genotyping-by-sequencing. Genetics 193: 1073–1081.
  24. 24. Buerkle CA, Gompert Z (2013) Population genomics based on low coverage sequencing: how low should we go? Molecular Ecology 22: 3028–3035.
  25. 25. Gompert Z, Buerkle CA (2012) bgc: Software for Bayesian estimation of genomic clines. Molecular Ecology Resources 12: 1168–1176.
  26. 26. Parchman TL, Gompert Z, Mudge J, Schilkey FD, Benkman CW, et al. (2012) Genome-wide association genetics of an adaptive trait in lodgepole pine. Molecular Ecology 21: 2991–3005.
  27. 27. Rai HS, Mock KE, Richardson BA, Cronn RC, Hayden KJ, et al. (2013) Transcriptome characterization and detection of gene expression differences in aspen (Populus tremuloides). Tree Genetics & Genomes 9: 1031–1041.
  28. 28. Little EL, Jr. (1971) Atlas of United States trees, volume 1, conifers and important hardwoods. Atlas of United States trees, Volume 1, conifers and important hardwoods: USDA Miscellaneous Publication 1146.
  29. 29. Callahan CM, Rowe CA, Ryel RJ, Shaw JD, Madritch MD, et al. (2013) Continental-scale assessment of genetic diversity and population structure in quaking aspen (Populus tremuloides). Journal of Biogeography 40: 1780–1791.
  30. 30. Wigginton JE, Cutler DJ, Abecasis GR (2005) A note on exact tests of Hardy-Weinberg equilibrium. American Journal of Human Genetics 76: 887–893.
  31. 31. Jombart T (2008) adegenet: a R package for the multivariate analysis of genetic markers. Bioinformatics 24: 1403–1405.
  32. 32. Jombart T, Ahmed I (2011) adegenet 1.3-1: new tools for the analysis of genome-wide SNP data. Bioinformatics 27: 3070–3071.
  33. 33. Goudet J (2005) HIERFSTAT, a package for R to compute and test hierarchical F-statistics. Molecular Ecology Notes 5: 184–186.
  34. 34. Evans LM, Allan GJ, Whitham TG (2012) Populus hybrid hosts drive divergence in the herbivorous mite, Aceria parapopuli: implications for conservation of plant hybrid zones as essential habitat. Conservation Genetics 13: 1601–1609.
  35. 35. Olson MS, Levsen N, Soolanayakanahally RY, Guy RD, Schroeder WR, et al. (2013) The adaptive potential of Populus balsamifera L. to phenology requirements in a warmer global climate. Molecular Ecology 22: 1214–1230.
  36. 36. Keller SR, Levsen N, Ingvarsson PK, Olson MS, Tiffin P (2011) Local selection across a latitudinal gradient shapes nucleotide diversity in balsam poplar, Populus balsamifera L. Genetics 188: 941–U318.
  37. 37. Keller SR, Levsen N, Olson MS, Tiffin P (2012) Local adaptation in the flowering-time gene network of balsam poplar, Populus balsamifera L. Molecular Biology and Evolution 29: 3143–3152.
  38. 38. Schweitzer JA, Madritch MD, Bailey JK, LeRoy CJ, Fischer DG, et al. (2008) From genes to ecosystems: The genetic basis of condensed tannins and their role in nutrient regulation in a Populus model system. Ecosystems 11: 1005–1020.
  39. 39. DiFazio SP, Slavov GT, Joshi CP (2011) Populus: A premier pioneer system for plant genomics. In: joshi C, Difazio SP, Kole C, editors. Genetics, genomics and breeding of poplar. Enfield, NH: Science Publishers. pp. 1–28.
  40. 40. Perala DA (1990) Populus tremuloides Michx., Quaking Aspen. In: Burns RM, Honkala BH, editors. Silvics of North America, Volume 2, Hardwoods, USDA Forest Service, Agricultural Handbook 654. pp. 555–569.
  41. 41. Cheliak WM, Dancik BP (1982) Genic diversity of natural populations of a clone-forming tree Populus tremuloides. Canadian Journal of Genetics and Cytology 24: 611–616.
  42. 42. Sonah H, Bastien M, Iquira E, Tardivel A, Legare G, et al. (2013) An improved genotyping by sequencing (GBS) approach offering increased versatility and efficiency of SNP discovery and genotyping. PLoS ONE 8: e54603.
  43. 43. Phillips T (2008) The role of methylation in gene expression. Nature Education 1: 138.
  44. 44. Slavov G, Zhelev P (2010) Salient biological features, systematics, and genetic variation of Populus. In: Jansson S, Bhalerao R, Groover A, editors. Genetics and genomics of Populus. New York: Springer. pp. 15–38.
  45. 45. Jelinski DE, Cheliak WM (1992) Genetic diversity and spatial subdivision of Populus tremuloides (Salicaceae) in a heterogeneous landscape. American Journal of Botany 79: 728–736.
  46. 46. Mock KE, Rowe CA, Hooten MB, Dewoody J, Hipkins VD (2008) Clonal dynamics in western North American aspen (Populus tremuloides). Molecular Ecology 17: 4827–4844.
  47. 47. O'Reilly PT, Canino MF, Bailey KM, Bentzen P (2004) Inverse relationship between FST and microsatellite polymorphism in the marine fish, walleye pollock (Theragra chalcogramma): implications for resolving weak population structure. Molecular Ecology 13: 1799–1814.
  48. 48. Pompanon F, Bonin A, Bellemain E, Taberlet P (2005) Genotyping errors: Causes, consequences and solutions. Nature Reviews Genetics 6: 847–859.
  49. 49. Bonin A, Bellemain E, Eidesen PB, Pompanon F, Brochmann C, et al. (2004) How to track and assess genotyping errors in population genetics studies. Molecular Ecology 13: 3261–3273.
  50. 50. Meacham F, Boffelli D, Dhahbi J, Martin DIK, Singer M, et al.. (2011) Identification and correction of systematic error in high-throughput sequence data. BMC Bioinformatics 12..
  51. 51. Ellis JS, Gilbey J, Armstrong A, Balstad T, Cauwelier E, et al. (2011) Microsatellite standardization and evaluation of genotyping error in a large multi-partner research programme for conservation of Atlantic salmon (Salmo salar L.). Genetica 139: 353–367.
  52. 52. Guichoux E, Lagache L, Wagner S, Chaumeil P, Leger P, et al. (2011) Current trends in microsatellite genotyping. Molecular Ecology Resources 11: 591–611.
  53. 53. Crawford LA, Koscinski D, Keyghobadi N (2012) A call for more transparent reporting of error rates: the quality of AFLP data in ecological and evolutionary research. Molecular Ecology 21: 5911–5917.
  54. 54. Wang Y, Lu J, Yu J, Gibbs RA, Yu F (2013) An integrative variant analysis pipeline for accurate genotype/haplotype inference in population NGS data. Genome research 23: 833–842.
  55. 55. van Poecke RMP, Maccaferri M, Tang J, Truong HT, Janssen A, et al. (2013) Sequence-based SNP genotyping in durum wheat. Plant Biotechnology Journal 11: 809–817.