Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Open Access

Peer-reviewed

Research Article

Application of Enhanced Sampling Monte Carlo Methods for High-Resolution Protein-Protein Docking in Rosetta

  • Zhe Zhang,

    Affiliation Physik-Department T38, Technische Universität München, James-Franck-Str. 1, 84748 Garching, Germany

    ⨯
  • Christina E. M. Schindler,

    Affiliation Physik-Department T38, Technische Universität München, James-Franck-Str. 1, 84748 Garching, Germany

    ⨯
  • Oliver F. Lange,

    Affiliation Biomolecular NMR and Munich Center for Integrated Protein Science, Department Chemie, Technische Universität München, Lichtenbergstr. 4, 85748 Garching, Germany

    ⨯
  • Martin Zacharias

    martin.zacharias@ph.tum.de

    Affiliation Physik-Department T38, Technische Universität München, James-Franck-Str. 1, 84748 Garching, Germany

    ⨯

Abstract

The high-resolution refinement of docked protein-protein complexes can provide valuable structural and mechanistic insight into protein complex formation complementing experiment. Monte Carlo (MC) based approaches are frequently applied to sample putative interaction geometries of proteins including also possible conformational changes of the binding partners. In order to explore efficiency improvements of the MC sampling, several enhanced sampling techniques, including temperature or Hamiltonian replica exchange and well-tempered ensemble approaches, have been combined with the MC method and were evaluated on 20 protein complexes using unbound partner structures. The well-tempered ensemble method combined with a 2-dimensional temperature and Hamiltonian replica exchange scheme (WTE-H-REMC) was identified as the most efficient search strategy. Comparison with prolonged MC searches indicates that the WTE-H-REMC approach requires approximately 5 times fewer MC steps to identify near native docking geometries compared to conventional MC searches.

Citation: Zhang Z, Schindler CEM, Lange OF, Zacharias M (2015) Application of Enhanced Sampling Monte Carlo Methods for High-Resolution Protein-Protein Docking in Rosetta. PLoS ONE 10(6): e0125941. https://doi.org/10.1371/journal.pone.0125941

Academic Editor: Giorgio Colombo, Consiglio Nazionale delle Ricerche, ITALY

Received: February 12, 2015; Accepted: March 26, 2015; Published: June 8, 2015

Copyright: © 2015 Zhang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

Data Availability: All relevant data are within the paper and its Supporting Information files.

Funding: This work was supported by: Deutsche Forschungsgemeinschaft (DFG), SFB1035/project B02 and B09; DFG-Excellence Cluster: Center of Protein Science Munich (CIPSM); Supercomputer grant at Leibnitz Rechenzentrum (LRZ)/pr86pu. The funders had no role in study, design, data collection and analysis, decision to publish, or preparation of the manuscript.

Competing interests: The authors have declared that no competing interests exist.

Introduction

Protein-protein interactions are integral to many mechanisms of cellular activities, ranging from enzyme catalysis and inhibition to signal transduction and gene regulation. Atomic-level structural knowledge is essential to understand the function of protein-protein complexes in biological processes. However, experimental structure determination of protein-protein complexes is often difficult and for many interactions the corresponding complex structures are lacking [1,2]. Computational protein-protein docking methods can provide structural models of protein-protein interactions where experimental data is absent, of low-resolution or too sparse. Besides providing valuable structural biology information, high-resolution protein-protein docking can also help to explain binding affinities and specificities, the nature of the binding free energy funnel and effects of mutations. Furthermore, these techniques are essential for computational protein-protein interface design of the design of non-natural complexes [3–7]

Docking programs often employ a two-stage protocol [8,9]. First, the space of putative docking geometries is sampled broadly, keeping the partner structures rigid, which corresponds to six degrees of freedom. Second, structures are refined in one or multiple steps, typically employing partner structures at atomic resolution allowing for conformational changes of side chains and possibly also of the protein main chain. For the rigid-body stage, the application of grid-based fast Fourier transformation [10] or geometric hashing [11] can accelerate the search [8,9]. Alternatively, the search can also be performed efficiently at reduced resolution using a coarse-grained model of the protein structures [12,13]. Both, at the rigid-body search stage or during refinement, Monte Carlo (MC) methods can be very helpful [14–18].

For high-resolution refinement, most protocols require a starting configuration that is already fairly close to the native structure. The likely reason for this strong dependence on the starting structure is the energy landscape’s ruggedness, which frustrates the sampling and renders the global energy minimum hard to reach [19]. Accordingly, the rationale behind typical two stage docking refinement protocols is that the initial docking predictions is likely to generate at least one structure close to the native. A justification of this assumption is given by the general hypothesis that the native conformation coincides with the global energy minimum at the bottom of a broad basin in a rugged energy landscape [20,21]. However, since initial docking stages often use a simplified energy function, the initial docking stage is routinely misled and does not actually produce sufficiently many near-native candidates for the subsequent refinement stage, especially when there is an alternative binding site with larger buried surface [14].

Focus of this work is to improve the sampling for high-resolution docking based on the MC approach. In the MC method, random translational and rotational moves or conformational changes of the partner structures are applied on the configuration in a step-wise manner using the Metropolis criterion for acceptance of a move. Advantages of the MC method are the generation of a physically relevant canonical ensemble of docking configurations, use of arbitrary energy functions that can contain discontinuities and for the possibility to include various levels of structural flexibility. However, an exhaustive high-resolution sampling of the conformational space with the MC method can be computationally demanding. In general, the docking success of MC docking is limited by the sampling of putative complex geometries and by the accuracy of the energy function used for scoring predicted complexes.

Parallel tempering or replica exchange techniques promise to overcome these challenges and have received wide-spread interest in recent years [22–25]. The general idea of parallel tempering is to simulate the system with M replicas at different temperatures and to frequently exchange configurations between neighboring replicas. The high temperature replicas sample broadly, whereas the low-temperature replicas allow precise exploration of deep energy minima. Due to the frequent exchanges between the (hot) broad sampling regime and the (cold) annealing regime, configurations are less likely to get trapped in local minima. A generalization of temperature replica exchange is to vary the Hamiltonian (H-REMC) among replicas [26], which allows, for instance, to blend between a smoothed van der Waals potential and a realistically hard formulation to allow overcoming of sampling barriers in molecular dynamics simulation [27,28]. For Rosetta, previous studies also showed that softening the Lennard-Jones repulsive term is beneficial and better suited for side-chain modeling and prediction [29,30]. Of course, it is possible to combine variation of temperature and Hamiltonian in multi-dimensional replica exchange approaches [31–35]. A bottleneck in using replica exchange is that to cover the same parameter range (temperature, or smoothness) the number of replicas required increases quickly with the number of degrees of freedom sampled. This is due to the fact, that to achieve efficient exchange between replicas, a substantial overlap between sampled energy levels of neighboring replicas is required [33,36].

Metadynamics is another popular enhanced sampling method, in which sampling is facilitated by a history-dependent biasing potential. It is constructed as the sum of Gaussian functions deposited along the trajectory in the collective variable space [37,38]. Choosing energy as collective variable gives rise to the so-called well-tempered ensemble (WTE) with much larger fluctuations in the sampled energies than the canonical ensemble [39]. This property of the WTE can be exploited to overcome the major bottleneck of temperature replica exchange discussed above. Since, the overlap of the energy distribution between neighboring replicas controls the exchange efficiency, using WTE drastically reduces the number of replicas required [39,40].

In the present study we have compared the efficiency of a standard MC protocol for high resolution protein-protein docking using RosettaDock and various extensions based on advanced sampling techniques. In particular, we tested four different protocols, standard Monte Carlo (MC), Temperature Replica Exchange Monte Carlo (REMC), well-tempered ensemble temperature Replica Exchange Monte Carlo (WTE-REMC), and well-tempered ensemble two dimensional Hamiltonian Replica Exchange Monte Carlo (WTE-H-REMC). The approaches were systematically evaluated on protein-protein complexes using unbound partner structures and starting in each case from the same starting placements. Overall best performance was achieved with the WTE-H-REMC method at the same computational cost compared to the alternative protocols.

Methods

Energy scoring function and starting structure generation

The standard all-atom energy function for RosettaDock as given by the weight-set docking [41] was used in all docking protocols. The docking energy function consists of van der Waals attractive and repulsive interactions, an implicit solvation term, hydrogen-bonding energies, a statistical residue-residue pairwise interaction term, a rotamer probability term and a pairwise electrostatic energy term [18,42]. For each target, the different docking simulation protocols were started from the same initial protein partner arrangements. The start geometries were based on unbound partner structures and one partner was initially separated relative to the position in the complex in a random direction by 15 Å and a random rotation by 60° relative to the bound geometry. Only geometries without steric overlap between partners were accepted. The ligand RMSD (L_rmsd, root mean square deviation of the mobile protein after best superposition of the receptor protein onto native complex structure) from the respective bound complex for all the targets was on average ~18 Å with slight variation depending on the shape and size of the binding partners (Fig 1). The initial placement corresponds to a scenario where the binding region is approximately known.

thumbnail
Download:
Fig 1. Docking refinement conditions.

Each docking starting geometry was generated by an initial random translation of one unbound partner from the geometry in the complex by 15Å and random rotation of 60° (compare green displaced and grey cartoon representations). During the docking search translation and rotation of one partner with respect to the other was restricted relative to the starting geometry by 20Å and 90° (indicated by red circle), respectively.

https://doi.org/10.1371/journal.pone.0125941.g001

Restricting the sampling space in rigid body degrees of freedom

For rigid body moves, random translations drawn from Gaussian distribution are performed along all three axes, and the axis-angle notation is used to represent rotations [14]. In order to perform a local search in the vicinity of the starting geometry, the sampling space in the rigid body degrees of freedom was restricted with respect to the initial input conformation by a maximum translation of 20Å and maximum rotation of 90° (this exceeds the maximum displacement of the starting structure from the bound configuration, see previous paragraph and illustration in Fig 1). To avoid dissociation of the two binding partners, we also applied an encounter constraint, which acts on the distance between the center of mass of the two binding partners and only penalizes the sampled geometries if the two binding partners are too far apart [14].

General settings

We have combined enhanced sampling techniques with Monte Carlo (MC) method to sample protein-protein docking with atomistic representation, and tested four protocols within Rosetta including standard MC, Temperature Replica Exchange Monte Carlo (REMC), well-tempered ensemble temperature Replica Exchange Monte Carlo (WTE-REMC), and well-tempered ensemble 2-dimensional Hamiltonian Replica Exchange Monte Carlo (WTE-H-REMC). In those docking approaches, rigid body displacements and side-chain optimization are accomplished by the rigid body mover UnbiasedRigidBodyPerturbNoCenterMover, and sidechain movers including JumpRotamerSidechainMover, PerturbRotamerSidechainMover and PerturbChiSidechainMover. Those movers are applied under the control of the Metropolis-Hastings framework. For each move, the MetropolisHastingsMover randomly applies one out of the four movers based on their sampling weights. Mover step size for UnbiasedRigidBodyPerturbNoCenterMover and PerturbChiSidechainMover are drawn from random Gaussian distributions. In the protocols with replica exchange, the magnitude for mover step size and sampling weight were modulated according to the replica level during initialization such that in the lower levels more frequent side-chain moves and fewer small rigid body moves were applied and in the higher levels less frequent side-chain moves and larger rigid-body moves. The magnitude of the step size and sampling weight were, however, kept fixed along the simulation in each replica. All the settings for the reference replica were made exactly the same as used in the standard MC protocol, and we denote these settings as reference settings. If not indicated otherwise, for all the protocols and on each target 2x106 MC steps were employed. Snapshots are taken and stored every 1,000 steps. In the REMC protocols exchanges were attempted every 1,000 MC steps.

Monte Carlo and Asynchronous Parallel Tempering protocol

For the standard MC docking protocol, 25 trajectories are run with temperature set to 0.15. At the end, about 25 x 2,000 sampled structures were collected for each target. The step size of translation and rotation for rigid-body moves are drawn from normal distributions with small mean value of 0.1Å and 1°. The sampling weights for UnbiasedRigidBodyPerturbNocenter, JumpRotamerSidechain, PerturbRotamerSidechain and PerturbChiSidechain are set to 0.5, 4, 6 and 10, respectively.

For the parallel tempering replica exchange (REMC) protocol, 13 temperature levels were drawn from geometric progressions ranging from 0.15 (reference) to 0.31. Two trajectories with the 13 replicas are run for each target. Exchanges were attempted between neighbor replicas every 1,000 steps. For all targets, good exchange rates (between 25% and 69% with median value 49%) are achieved and no further target dependent optimization was required. In replica exchange, it is common that the speed of each replica is not exactly the same. To avoid that the faster replica wait for the slower partner, we used an asynchronous exchange scheme. That is the faster replicas can perform more steps instead of waiting for its partner to reach the pre-defined exchange stride. Finally, the simulation will finish as soon as the slowest replica has reached the required step number.

Well-Tempered Parallel Tempering and Hamiltonian replica exchange protocol

We applied the well-tempered ensemble (WTE) technique with parallel tempering replica exchange Monte Carlo using a value of 5 for the tunable factor γ and reduced the temperature levels from 13 to 5 with the same range. The bin size for well-tempered ensemble technique to collect the history-dependent bias energy is set to two units of Rosetta docking energy. The resulting exchange rates are between 20% and 55% with median value 37%. For the WTE-H-REMC protocol we took advantage of the splitting of the van der Waals interactions into attractive and repulsive components in RosettaDock. It is represented with a modified Lennard-Jones 6–12 potential which includes a linear extrapolation in the repulsive part below the threshold of 0.6σij, where σij is the sum of the atomic radii of atoms i and j. The atomic radii and energy well depth are taken from the CHARMM19 parameter set [13,18,43], and we denote this as "hard-rep". For the standard "soft-rep" in Rosetta, the atomic radii were either held fixed or scaled by a factor of 1.07 (typically for non-polar atoms) from the hard-rep radii, and the "switch point" for the linear extrapolation was selected empirically [29]. In the WTE-H-REMC protocol, we applied a 2-dimensional replica exchange, with the temperature as variable in the first dimension, and used the scaling factor for the soft Lennard-Jones repulsive term as the second dimension. The scaling factor allows linear interpolation of atomic radii and switch point between the hard-rep and soft-rep potentials (see above). In the Hamiltonian scaling dimension, we used five levels: hard_rep, soft 50%, soft 55%, soft 60% and soft 65%. In the temperature dimension five temperatures between 0.15 and 0.3 were used (in arbitrary units depending on the scaling of the Rosetta score), yielding a total of 25 replicas. Exchange between neighboring replicas is attempted every 1,000 steps along the two dimensions. Well tempered ensemble technique was applied again to improve the exchange rate with tunable factor γ = 5. The bin size for well-tempered ensemble technique to collect the history-dependent bias energy is set to two units of the Rosetta docking energy. Note, that each replica accumulated separate history-dependent biasing potentials depending on the individual sampling history. Replica exchange rate ranged between 14% and 56% in the temperature dimension with median value 32%. In the scaling dimension, it increased along the shifting from soft to hard repulsive interaction, and ranged between 12% and 99% with median value 39%.

Implementation in Rosetta

Previously, we implemented replica exchange within the general Metropolis-Hastings framework of the Rosetta3 software package [14]. The replica exchange module is accessible through the RosettaScripts interface and can be combined with any conformational moves that are implemented as children of the ThermodynamicMover class. For rigid-body docking refinement, we have applied a rigid-body mover UnbiasedRigidBodyPerturbNoCenterMover, and sidechain movers including JumpRotamerSidechainMover, PerturbRotamerSidechainMover and PerturbChiSidechainMover. For detailed balance, UnbiasedRigidBodyPerturbNoCenterMover performs unbiased rotational and translational perturbations in the restricted space as described in the previous section, and sidechain movers provide the proposal density of the perturbation through implementation of the abstract virtual function compute_proposal_density() in the ThermodynamicMover interface. The acceptance of a move is decided by the Metropolis criterion [44].

Side-chain motion is applied on one randomly selected residue (among all the residues and all the residue types but Proline) each time. Continuous sampling of side chain chi angles are used instead of fixed rotamers in all the three sidechain movers. The angles are chosen according to the Dunbrack rotamer library 2010 probabilities [45]. PerturbChiSidechainMover does a perturbation on the side chain chi angles, either uniformly distributed or Gaussian distributed with a given magnitude. For JumpRotamerSidechainMover and PerturbRotamerSidechainMover, a rotamer is first selected randomly or selected such that it has the highest probability of proposing the old chi angles according to the Dunbrack rotamer library probabilities, respectively, then individual chi angles are chosen using Gaussian distributed random angles with the means and standard deviations from the Dunbrack rotamer library.

The well-tempered ensemble technique is implemented into the framework of MetropolisHastings as ThermodynamicObserver. It is applied with a certain time interval (here in the test stride = 1) and deposits the Gaussians to the bias energy with height of where τG is the time interval or stride number, V(s, t) is the old bias energy in the energy bin where the current decoy's energy has dropped into, ω represents the initial bias deposition rate and ΔT = (1 − γ)T, in which γ represents the tunable factor and T is the temperature in the simulation [37,39,40,46]. When well-tempered ensemble technique is applied, acceptance of a move or an exchange attempt is decided based on the total energy, which is the sum of the force field energy and the bias energy. For final analysis, only the force field scoring energy was used.

Construction of a benchmark

The four protocols were first tested on 10 unbound targets (Table 1) from the benchmak4.0 set [47,48] with reasonable energy funnels using the RosettaDock scoring force field. This was checked by generating 1000 decoys with standard RosettaDock full protocol starting from the bound docking geometry (using unbound structures). These 10 targets belong to the group of “rigid body” docking cases with small changes of side chains associated with complex formation (according to the classification of the protein docking benchmark4.0 collection [47,48]). In addition, the standard MC protocol and the WTE_H_REMC protocols were also tested on another 10 unbound targets including one "difficult" (1JK9) and two "medium difficulty" (1MQ8 and 2CFH) targets (Table 1). The number of residues of the 20 targets range between 122 and 409.

thumbnail
Download:
Table 1. Test complex structures and partner structures.

https://doi.org/10.1371/journal.pone.0125941.t001

Analysis of docking results and computational efficiency

The sampled docked complex were analyzed according to ligand RMSD (L_rmsd) and fraction of native contacts (fnat), as defined in CAPRI [49] using the bound complexes as references. To evaluate the capacity of the methods to sample near-native decoys, we calculated the fraction of CAPRI medium (**, fnat ≥ 0.5 & L_rmsd > 1Å or 0.3 ≤ fnat < 0.5 & L_rmsd ≤ 5) or high (***, fnat ≥ 0.5 & L_rmsd ≤ 1Å) quality decoys in the collected results [50]. To evaluate the agreement between generated complexes with closest L_rmsd and best fnat compared to the bound complex. To evaluate the scoring energies the interaction score (I_sc) was used which is computed by subtracting the all-atom energy of non-interacting partners from the all-atom energy of the interacting partners in the complex. To compute the energy of non-interacting partners the two binding partners are moved far away from each other while keeping all internal degrees of freedom fixed. To investigate the efficiency of optimizing the scoring energies, we calculated for a given MC step number the average difference of the sampled best score (up to the selected MC step number) and the final most favorable score.

Results and Discussion

Monte Carlo docking simulations are frequently used to perform protein-protein docking searches or for the refinement of predicted complexes at atomic resolution including limited conformational changes of the partner structures [14–17]. In recent years, enhanced sampling methods to improve the MC search efficiency have been developed. In order to test the performance of such improvements we compare the application of standard MD, parallel tempering REMC, well tempered replica exchange (WTE-REMC), and well tempered ensemble combined with 2-dimensional temperature and Hamiltonian replica exchange (WTE-H-REMC) to a set of protein-protein complexes in unbound partner conformation. In each case the MC moves included rigid body translation and rotation as well as side-chain moves (illustrated in Fig 2). For each protocol the same start configuration was used corresponding to a random arrangement of one mobile partner placed approximately 15 Å away from the bound complex geometry (see Methods for details). In case of the replica exchange methods only configurations in the reference replica were retained, resulting in approximately 25x2,000 decoys for standard MC protocol (with 2x106 MC steps), 2x2,000 for REMC protocol, 5x2,000 for WTE-REMC protocol and 1x2,000 for WTE-H-REMC protocol, respectively. On a 2.6 GHz AMD Opteron Processor (12 cores), 2x106 MC steps take between 4.5–20 hours. The sampled docking solutions were analyzed in terms of deviation from the known complex geometry (using the root mean square backbone deviation of the mobile ligand partner protein from the bound complex after best superposition of the receptor protein onto the bound complex: L_rmsd) and interaction score (I_sc).

thumbnail
Download:
Fig 2. Workflow represented by combination of Rosetta modules and setup of the four docking protocols.

The modules in orange, representing the enhanced sampling techniques of replica exchange and well-tempered ensemble, are only applied in the combined protocols.

https://doi.org/10.1371/journal.pone.0125941.g002

The protocols were first tested on 10 benchmark targets of the “rigid body” category (with only limited side chain changes upon complex formation, see Methods for details). We consider the sampling of medium or high-quality solutions (CAPRI **/*** solutions, defined in Methods section) according to the CAPRI criteria as successful docking refinement. The evolution of the sampling in terms of L_rmsd and I_sc scoring is showcased for two representative targets (pdb1EAW and pdb3SGQ) in Fig 3. For the pdb1EAW-target all methods sample progressively lower (more favorable) force field scores with increasing number of MC steps. However, for the first example only the WTE-H-REMC protocol samples docking solutions with L_rmsd < 5 Å after 2x106 MC steps. Only after 107 MC steps all techniques except the standard MC technique sample near-native solutions (Fig 3A). For the second example (pdb3SGQ) the MC technique successfully samples solutions with Lrmsd < 5 Å only after 107 MC steps whereas all three advanced sampling techniques reach near-native solutions already after 3x105 MC steps (Fig 3B). Qualitatively similar trends were observed for all other test cases (see Figures A-C in S1 File).

thumbnail
Download:
Fig 3. Scatter plot of interaction score I_sc (Rosetta units) vs. L_rmsd (Å) for the four docking refinement protocols and two representative targets, 1EAW (A) and 3SGQ (B).

The protocol is indicated on the left for each row of plots. The snapshots number is color-coded, that means blue and red dots corresponding to decoys sampled at the beginning and the end of the docking searches in each panel, respectively. The three columns of plots indicate the result after different simulation lengths (indicated on top of each column).

https://doi.org/10.1371/journal.pone.0125941.g003

A quantitative comparison of the docking refinement solutions in terms of the fraction of native contacts (fnat) indicates that the WTE-H-REMC method succeeded in all 10 cases in sampling near-native docking solutions with very high quality (Fig 4A). In contrast, the other protocols succeeded only in 3 (MC) or 7 (REMC and WTE-REMC) of the first 10 cases (Fig 4A). Note, that near-native docking solutions are also the best scoring solutions in several but not all docking test cases (e.g. for targets 1KTZ, 3D5S and 7CEI docking solutions with Lrmsd > 10 Å give I_sc scores lower than the solutions closest to the bound docking geometry, Figures B,C in S1 File). The results on the first 10 test cases indicate that the WTE-H-REMC enhanced sampling protocol showed the best performance. For a second test set of 10 targets (including also targets of the “medium” and “difficult” category, see Table 1), only the standard MC and the WTE-H-REMC protocols were compared. Again, the WTE-H-REMC protocol gave better docking results in 5 cases (IJK9, 1MQ8, 2CFH, 2OUL, 2SIC) with lower final I_sc scores and Lrmsd (Fig 4A, Figures D-F in S1 File) compared to the standard MC-method. However, in two cases (1H9D and 1HE1) the standard MC–method reached configurations closer to the bound form compared to the WTE-H-REMC technique. Note, that especially in these cases the score of near-native docking solutions was higher (less favorable) than for alternative docking geometries (Figures E, F in S1 File). Since the search techniques optimize the score (and not deviation from bound structure) it may explain the failure of the WTE-H-REMC technique in these cases.

thumbnail
Download:
Fig 4. Agreement between sampled docking geometries and the corresponding bound complex.

(A, upper panel) Highest fraction of native contacts (fnat) found in the top 10 decoys (according to L_rmsd) sampled in each protocol (2x106 MC steps). (A, lower panel) Fraction of CAPRI medium and high quality complexes found for each target and each protocol (the protocols MC, REMC, WTE-REMC and WTE-H-REMC are indicated by different colors). (B) same as in (A) but for the docking refinement runs with 107 MC steps.

https://doi.org/10.1371/journal.pone.0125941.g004

To check if slower convergence to reach low energy docking solutions was the main reason for the failure of some protocols to reach near-native docking solutions, we increased the trajectory length to 107 MC steps. Indeed, the success of MC, REMC, and WTE-REMC protocols to reach near-native docking solutions increased to 8, 10 and 10 out of the first 10 targets, respectively (Fig 4B, see also Figures C, F in S1 File). The results were further analyzed with respect to fraction of native contacts (fnat) of near –native docking solutions and the maximum quality of predicted docking geometries (Fig 4). Also for these measures and in case of the protocol with 2x106 MC steps the WTE-H-REMC protocol achieves overall the best performance (Fig 4A). For the extended protocol with 107 MC steps the quality of solutions in terms of fnat is more similar for all 4 protocols (Fig 4B), indicating that indeed the standard MC technique requires longer searches to achieve convergence compared to the WTE-H-REMC method. The best fnat for protocols MC, REMC and WTE-REMC all increased on average around 17%, getting close to that of the WTE-H-REMC protocol. The best fnat for protocol WTE-H-REMC also increased slightly (~7%, Fig 4B). Fig 3 presents two representative examples on targets 1EAW and 3SGQ of ligand RMSD (L_rmsd) versus interaction score (I_sc). Comparing these data with that from the trajectory of 2x106 MC steps, it shows that the details of the energy landscape sampled by WTE-H-REMC remains similar indicating reasonable convergence within 2x106 MC steps for most cases. Meanwhile, the rigid-body space reached for target 1EAW by protocols MC, REMC and WTE-REMC, and on target 3SGQ by protocol MC, drastically improved (Fig 3).

Since the force field score is the quantity which is optimized during the docking searches (and not the agreement with the bound structure) it is of interest to compare the protocols in terms of the efficiency to optimize the force field score. For each target, the average of the lowest 10 interaction scores (lowest I_sc) sampled up to a given MC step number was considered (using the extended trajectories) and the difference relative to the lowest score found during the search was recorded. The average of this quantity for all 20 cases was calculated and plotted in Fig 5. The enhanced sampling techniques REMC, WTE-REMC and WTE-H-REMC, consistently, reached lower interaction scores than the standard MC method for a given number of MC step (Fig 5A). The WTE-H-REMC technique reached on average lower I_sc than the other three protocols already after ~3x105 MC steps. Interestingly, the same analysis using the L_rmsd instead of the I_sc yields the same trend, indicating that on average the I_sc score correlates with the L_rmsd (Fig 5B). Low L_rmsd of sampled geometries gives on average (but not for all targets) also a favorable score.

thumbnail
Download:
Fig 5. Evolution of I_sc docking interaction score (A) and best sampled Lrmsd (B) vs. MC step number.

The MC step number is scaled by x1000. For the interaction score I_sc the smallest difference (sampled up to the selected step number) relative to the lowest scoring complex sampled in the entire docking search is plotted. The variance in sampled scores (up to the considered number of MC steps) is indicated by error bars for the MC protocol. It is of similar magnitude for the other protocols (not shown). For (B) the smallest sampled L_rmsd up to the step number indicated in the x-axis is shown.

https://doi.org/10.1371/journal.pone.0125941.g005

Protocol testing

A subset of three complexes (pdb-entries: 1PPE, 2OUL and 2SIC) was chosen as an independent protocol test set. For two of these three complexes, only the MC and the WTE_H_REMC protocol had been tested in the main work. The four protocols were run using the RosettaScripts interface with parameters as described above, trajectory length of 2x106 MC steps and a newly created starting conformation. In contrast to the previous docking runs, only a single starting conformation was generated for each complex. All the protocols could be successfully executed. A summary of the test results can be found in Table 2. For all three test cases, the enhanced sampling methods yielded structures of lower L_rmsd and higher fnat than standard MC sampling. Enhanced sampling methods generated near-native docking models, whereas standard MC sampling did not yield any structures of CAPRI one star quality or better. The WTE_H_REMC technique was the only method to generate CAPRI three star quality structures for all three cases and thus yielded the best performance on the test set. The results match the previously presented data for these three complexes and thus confirm that the sampling does not depend on the choice of the starting conformation. The randomly generated starting conformations sometimes contained clashes, but the enhanced sampling methods were able to refine them to high-quality solutions. Hence, it might be possible to use enhanced sampling methods also for refinement of docked complexes using other methods than RosettaDock.

thumbnail
Download:
Table 2. Results for protocol testing on a subset of three complexes.

https://doi.org/10.1371/journal.pone.0125941.t002

Conclusions

In this work, four different Monte Carlo advanced sampling protocols implemented in RosettaDock to predict the geometry of protein-protein complexes have been compared. For all the protocols (on each target) the same initial protein-protein docking start configurations were used with 15 Å translational displacements and 60° rotation of one partner from the native complex structure. This situation corresponds to the frequent scenario that the interaction region between proteins is approximately known and start configurations are placed close to the approximately known binding region. It is also very useful for directly comparing the docking performance of different approaches at the computational demanding atomistic high resolution level. Note, that the protocol is computationally too demanding for routine applications that require to search over the entire surface of two protein partners. If complete protein surfaces are considered it is also very likely that the scoring function is not accurate enough to pick out near-native solutions as lowest energy complexes. Our results on docking refinement show indeed that the application of advanced sampling schemes improves the docking refinement performance yielding final configurations in better agreement with the bound structure and yield also a much larger fraction of near-native structures compared to regular MC searches. The WTE-H-REMC consistently gave the best performance since it explores the phase space more efficiently due to larger energy fluctuation and due to the added biasing potential that effectively smoothes the landscape and increases the replica exchange rates. An increase of the number of MC steps to 107 in the standard MC protocol resulted in improved performance achieving a similar fraction of native contacts of best sampled solutions and similar final docking scores compared to WTE-H-REMC with 2x106 steps. Hence, in most cases a standard MC protocol requires roughly 5 times larger computational demand to achieve the same final docking prediction performance. It should be emphasized that this reflects only a general trend. For some test cases even 107 MC steps still gave inferior docking results compared to WTE-H-REMC and still the fraction of the best solutions relative to the total number of sampled geometries is much smaller than for the advanced sampling method. Further improvement might be possible by an adjustment of the bin size in the WTE to collect the history dependent bias energy. However, an even larger gain could be achieved by an improvement of the docking scoring function to increase the gap between ranking near-native and non-native solutions.

Supporting Information

S1 File. Supporting Figures.

Figure A. Scatter plot of interaction score (I_sc) vs. ligand RMSD (L_rmsd) for the first 10 targets after 3x105 MC steps. All the panels have the same L_rmsd range of [0.30], and the same I_sc range of [-15.0 Rosetta score units]. For each target, the tested protocols are grouped together and the corresponding protocol is indicated in the score-axis label on the left side. The snapshot number is color-coded, with dark blue and dark red dots corresponding to decoys sampled at the beginning and towards the end of the sampling interval, respectively. Figure B. Same as Figure A in S1 File but for the docking searches up to 2x106 MC steps. Figure C. Same as Figure A in S1 File but for the docking refinement simulation with 107 MC steps. Figure D. Scatter plot of interaction score (I_sc) vs. ligand RMSD (L_rmsd) for the additional 10 targets with 3x105 MC steps. All the panels have the same L_rmsd range of [0.30], and the same I_sc range of [-15.0]. For each target, the tested protocols are grouped together and the corresponding protocol is indicated in the score-axis label on the left side. The snapshots number is color-coded, with dark blue and dark red dots corresponding to decoys sampled at the beginning and the end, respectively. Figure E. Same as Figure D in S1 File but for docking searches up to 2x106 MC steps. Figure F. Same as Figure D in S1 File but for docking searches with 107 MC steps.

https://doi.org/10.1371/journal.pone.0125941.s001

(PDF)

Acknowledgments

The authors thank Drs. Isaure de Beauchene and Sjoerd de Vries for helpful discussions. This work was performed in the framework of SFB 1035. Computer resources for this project have been provided by the Gauss Centre for Supercomputing/Leibniz Supercomputing Centre under grant pr86pu.

Author Contributions

Conceived and designed the experiments: ZZ OL MZ. Performed the experiments: ZZ CS. Analyzed the data: ZZ CS MZ. Contributed reagents/materials/analysis tools: ZZ OL CS MZ. Wrote the paper: ZZ OL CS MZ.

References

  1. 1. Stumpf MPH, Thorne T, de Silva E, Stewart R, An HJ, Lappe M, et al. Estimating the size of the human interactome. Proc. Natl. Acad Sci USA. 2008; 105: 6959–6964. pmid:18474861
  2. 2. Garma L, Mukherjee S, Mitra P, Zhang Y. How Many Protein-Protein Interactions Types Exist in Nature? PLoS ONE. 2012; 7: e38913. pmid:22719985
  3. 3. Baker D. Protein folding, structure prediction and design. Biochem. Soc. Trans. 2014; 42: 225–229. pmid:24646222
  4. 4. Parmeggiani F, Huang P- S, Vorobiev S, Xiao R, Park K, Caprari S, et al. A general computational approach for repeat protein design. J Mol Biol. 2015; 427: 563–575. pmid:25451037
  5. 5. London N, Ambroggio X. An accurate binding interaction model in de novo computational protein design of interactions: if you build it, they will bind. J Struct Biol. 2014; 185: 136–146. pmid:23558036
  6. 6. Baker D. Prediction and design of macromolecular structures and interactions. Phil. Trans. R. Soc. Lond. B. 2006; 361: 459–463. pmid:16524834
  7. 7. Kortemme T, Joachimiak LA, Bullock AN, Schuler AD, Stoddard BL, Baker D. Computational redesign of protein-protein interaction specificity. Nat Struct Mol Biol. 2004; 11: 371–379. pmid:15034550
  8. 8. Huang S-Y. Search strategies and evaluation in protein-protein docking: principles, advances and challenges. Drug Discov Today. 2014; 19: 1081–1096. pmid:24594385
  9. 9. Vajda S, Kozakov D. Convergence and combination of methods in protein–protein docking. Current Opinion in Structural Biology. 2009; 19: 164–170. pmid:19327983
  10. 10. Katchalski-Katzir E, Shariv I, Eisenstein M, Friesem AA, Aflalo C, Vakser IA. Molecular surface recognition: determination of geometric fit between proteins and their ligands by correlation techniques. Proc Natl Acad Sci USA. 1992; 89: 2195–2199. pmid:1549581
  11. 11. Lawrence MC, Colman PM. Shape complementarity at protein-protein interfaces. J. Mol. Biol. 1994; 234: 946–950.
  12. 12. Zacharias M. Protein-protein docking with a reduced protein model accounting for side-chain flexibility. Protein Sci. 2003; 12: 1271–1282. pmid:12761398
  13. 13. Gray JJ, Moughon S, Wang C, Schueler-Furman O, Kuhlman B, Rohl CA, et al. Protein–Protein Docking with Simultaneous Optimization of Rigid-body Displacement and Side-chain Conformations. J Mol Biol. 2003; 331: 281–299. pmid:12875852
  14. 14. Zhang Z, Lange OF. Replica Exchange Improves Sampling in Low-Resolution Docking Stage of RosettaDock. PLoS ONE. 2013; 8(8): e72096. pmid:24009670
  15. 15. Lorenzen S, Zhang Y. Monte Carlo refinement of rigid-body protein docking structures with backbone displacement and side-chain optimization. Protein Sci. 2007; 16: 2716–2725. pmid:17965193
  16. 16. Fernández Recio J, Totrov M, Abagyan R. ICM‐DISCO docking by global energy optimization with fully flexible side‐chains. Proteins: Structure, Function, and Bioinformatics. 2003; 52: 113–117. pmid:12784376
  17. 17. Dominguez C, Boelens R, Bonvin AMJJ. HADDOCK: A Protein−Protein Docking Approach Based on Biochemical or Biophysical Information. J Am Chem Soc. 2003; 125: 1731–1737. pmid:12580598
  18. 18. Gray JJ. High-resolution protein–protein docking. Current Opinion in Structural Biology. 2006; 16: 183–193. pmid:16546374
  19. 19. London N, Schueler-Furman O. Funnel hunting in a rough terrain: learning and discriminating native energy funnels. Structure. 2008; 16: 269–279. pmid:18275818
  20. 20. Dill KA, Chan HS. From Levinthal to pathways to funnels. Nat Struct Biol 1997; 4: 10–19. pmid:8989315
  21. 21. Camacho CJ, Weng Z, Vajda S, DeLisi C. Free energy landscapes of encounter complexes in protein-protein association. Biophys J. 1999; 76: 1166–1178. pmid:10049302
  22. 22. Swendsen RH, Wang JS. Replica Monte Carlo simulation of spin-glasses. Phys Rev Lett. 1986; 57: 2607–2609. pmid:10033814
  23. 23. Hansmann UHE. Parallel tempering algorithm for conformational studies of biological molecules. Chem Phys Lett. 1996; 281: 140–150.
  24. 24. Falcioni M, Deem MW. A biased Monte Carlo scheme for zeolite structure solution. J Chem Phys 1999; 110, 1754.
  25. 25. Sugita Y, Okamoto Y. Replica-exchange molecular dynamics method for protein folding. Chem Phys Lett. 1999; 314: 141–151.
  26. 26. Fukunishi H, Watanabe O, Takada S. On the Hamiltonian replica exchange method for efficient sampling of biomolecular systems: Application to protein structure prediction. J Chem Phys. 2002; 116: 9058.
  27. 27. Hritz J, Oostenbrink C. Hamiltonian replica exchange molecular dynamics using soft-core interactions. J Chem Phys. 2008; 128: 144121. pmid:18412437
  28. 28. Luitz MP, Zacharias M. Protein-ligand docking using hamiltonian replica exchange simulations with soft core potentials. J Chem Inf Model. 2014; 54: 1669–1675. pmid:24855894
  29. 29. Dantas G, Corrent C, Reichow SL, Havranek JJ, Eletr ZM, Isern NG, et al. High-resolution structural and thermodynamic analysis of extreme stabilization of human procarboxypeptidase by computational protein design. J Mol Biol. 2007; 366: 1209–1221. pmid:17196978
  30. 30. Yanover C, Schueler-Furman O, Weiss Y. Minimizing and learning energy functions for side-chain prediction. J Comput Biol. 2008; 15: 899–911. pmid:18707538
  31. 31. Yan Q, de Pablo JJ. Hyper-parallel tempering Monte Carlo: Application to the Lennard-Jones fluid and the restricted primitive model. J Chem Phys. 1999; 111: 9509.
  32. 32. Yan Q, de Pablo JJ. Hyperparallel tempering Monte Carlo simulation of polymeric systems. J Chem Phys. 2000; 113: 1276–1282.
  33. 33. Earl DJ, Deem MW. Parallel tempering: Theory, applications, and new perspectives. Phys Chem Chem Phys. 2005; 7: 3910. pmid:19810318
  34. 34. Rathore N, Chopra M, de Pablo JJ. Optimal allocation of replicas in parallel tempering simulations. J Chem Phys. 2005; 122: 024111. pmid:15638576
  35. 35. Katzgraber HG, Trebst S, Huse DA, Troyer M. Feedback-optimized parallel tempering Monte Carlo. J Stat Mech. 2006: P03018–P03018.
    • 36. Ostermeir K, Zacharias M. Advanced replica-exchange sampling to study the flexibility and plasticity of peptides and proteins. Biochim Biophys Acta. 2013; 1834: 847–853. pmid:23298543
    • 37. Barducci A, Bonomi M, Parrinello M. Metadynamics. WIREs Comput Mol Sci. 2011; 1: 826–843.
    • 38. Laio A, Gervasio FL. Metadynamics: a method to simulate rare events and reconstruct the free energy in biophysics, chemistry and material science. Rep Prog Phys. 2008; 71: 126601.
    • 39. Bonomi M, Parrinello M. Enhanced sampling in the well-tempered ensemble. Phys Rev Lett. 2010; 104: 190601. pmid:20866953
    • 40. Deighan M, Bonomi M, Pfaendtner J. Efficient Simulation of Explicitly Solvated Proteins in the Well-Tempered Ensemble. J Chem Theory Comput. 2012; 8: 2189–2192.
    • 41. Chaudhury S, Berrondo M, Weitzner BD, Muthu P, Bergman H, Gray JJ. Benchmarking and Analysis of Protein Docking Performance in Rosetta v3.2. PLoS ONE. 2011; 6: e22477. pmid:21829626
    • 42. Gray JJ, Moughon SE, Kortemme T, Schueler-Furman O, Misura KMS, Morozov AV, et al. Protein-protein docking predictions for the CAPRI experiment. Proteins: Structure, Function, and Bioinformatics. 2003; 52: 118–122. pmid:12784377
    • 43. Rohl CA, Strauss CE, Misura KM, Baker D. Protein structure prediction using Rosetta. Meth Enzymol. 2004; 383: 66–93. pmid:15063647
    • 44. Metropolis N, Rosenbluth AW, Rosenbluth MN, Teller AH, Teller E. Equation of State Calculations by Fast Computing Machines. J Chem Phys. 1953; 21: 1087–1092.
    • 45. Shapovalov MV, Dunbrack RL Jr. A Smoothed Backbone-Dependent Rotamer Library for Proteins Derived from Adaptive Kernel Density Estimates and Regressions. Structure. 2011; 19: 844–858. pmid:21645855
    • 46. Barducci A, Bussi G, Parrinello M. Well-Tempered Metadynamics: A Smoothly Converging and Tunable Free-Energy Method. Phys Rev Lett. 2008; 100: 020603. pmid:18232845
    • 47. Hwang H, Vreven T, Janin J, Weng Z. Protein-protein docking benchmark version 4.0. Proteins. 2010; 78: 3111–3114. pmid:20806234
    • 48. Hwang H, Pierce B, Mintseris J, Janin J, Weng Z. Protein-protein docking benchmark version 3.0. Proteins. 2008; 73: 705–709. pmid:18491384
    • 49. Méndez R, Leplae R, De Maria L, Wodak SJ. Assessment of blind predictions of protein–protein interactions: current status of docking methods. Proteins. 2003; 52: 51–67. pmid:12784368
    • 50. Lensink MF, Wodak SJ. Docking and scoring protein interactions: CAPRI 2009. Proteins. 2010; 78: 3073–3084. pmid:20806235