Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Avidin-biotin complex-based capture coating platform for universal Influenza virus immobilization and characterization

  • Micaela Trexler ,

    Roles Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Validation, Visualization, Writing – original draft, Writing – review & editing

    mtrexler@wayne.edu

    Affiliations Smart Sensors and Integrated Microsystems, Wayne State University, Detroit, Michigan, United States of America, Department of Biomedical Engineering, Wayne State University College of Engineering, Detroit, Michigan, United States of America

  • Michelle Brusatori,

    Roles Formal analysis, Writing – review & editing

    Affiliations Smart Sensors and Integrated Microsystems, Wayne State University, Detroit, Michigan, United States of America, Department of Biomedical Engineering, Wayne State University College of Engineering, Detroit, Michigan, United States of America, Michael and Marian Illitch Department of Surgery, Wayne State University School of Medicine, Detroit, Michigan, United States of America

  • Gregory Auner

    Roles Conceptualization, Funding acquisition, Methodology, Resources, Supervision, Writing – review & editing

    Affiliations Smart Sensors and Integrated Microsystems, Wayne State University, Detroit, Michigan, United States of America, Department of Biomedical Engineering, Wayne State University College of Engineering, Detroit, Michigan, United States of America, Michael and Marian Illitch Department of Surgery, Wayne State University School of Medicine, Detroit, Michigan, United States of America

Abstract

Influenza virus mutates quickly and unpredictably creating emerging pathogenic strains that are difficult to detect, diagnose, and characterize. Conventional tools to study and characterize virus, such as next generation sequencing, genome amplification (RT-PCR), and serological antibody testing, are not adequately suited to rapidly mutating pathogens like Influenza virus where the success of infection heavily depends on the phenotypic expression of surface glycoproteins. Bridging the gap between genome and pathogenic expression remains a challenge. Using sialic acid as a universal Influenza virus binding receptor, a novel virus avidin-biotin complex-based capture coating was developed and characterized that may be used to create future diagnostic and interrogation platforms for viable whole Influenza virus. First, fluorescent FITC probe studies were used to optimize coating component concentrations. Then atomic force microscopy (AFM) was used to profile the surface characteristics of the novel capture coating, acquire topographical imaging of Influenza particles immobilized by the coating, and calculate the capture efficiency of the coating (over 90%) for all four representative human Influenza virus strains tested.

Introduction

Influenza virus mutates quickly and unpredictably creating emerging pathogenic strains that are difficult to detect, diagnosis, and characterize. Each year there are millions of flu cases and tens of thousands of deaths in the United States alone [1]. The wide variety of circulating strains of Influenza virus at any given time contributes to the difficulty of selecting candidate strains for yearly seasonal flu vaccine development as well as making the study of Influenza virus as a species challenging. Strains may suddenly emerge through antigenic shift (reassortment) and become pandemic, such as the 1918 H1N1 “Spanish flu”, 1957 H2N2 “Asian flu”, or 2009 H1N1 “swine flu” [2]. These pandemic strains often remain circulating in the population for decades, undergoing gradual antigenic drift to cause milder, yearly epidemics until they completely disappear from circulation.

Influenza virus relies on two glycoproteins on its enveloped surface to successfully bind to and later release from epithelial cells of the host respiratory tract—hemagglutinin (HA) and neuraminidase (NA). Influenza HA’s are known to multivalently bind to sialic acid (SA) residues of the host cell’s glycocalyx during the first step of the viral infection cycle [35]. This SA binding triggers viral entry through endocytosis and mediates subsequent endosomal membrane fusion resulting in the release of viral ribonucleoprotein into the host cell [6]. One of the major differences among HA subtypes of Influenza virus is the preferential binding to a specific conformation of the sialic acid glycosidic linkage to glycolipids and glycoproteins of the host cell glycocalyx. For instance, HA subtypes of human Influenza A virus preferentially bind to sialic acid with an α2,6 glycosidic linkage which are abundant on the human pulmonary epithelium [7]. Whereas HA subtypes of avian Influenza A strains prefer an α2,3 glycosidic linkage. This preferential receptor binding is likely one of the major barriers preventing the spread of highly pathogenic avian influenza A virus in humans [8]. Conversely, Influenza B is an exclusively human circulating class of Influenza virus that has a much lower mutation rate in the HA encoded region of its genetic material. The Influenza B virus HA contains a conserved, narrower sialic acid binding site that preferentially binds to the α2,6 glycosidic conformation by discriminating against the avian α2,3 glycosidic linkage [6].

However, there is evidence that the sialic acid residue preference of HA is not absolute. Species crossover has been proven to begin before changes in the HA binding domain occurs, such as during the 1997 Hong Kong bird flu outbreak caused by an avian H5N1 influenza A virus [9]. All eight gene segments of the virus were of avian origin and maintained preference for binding the avian α2,3 glycosidic linkage, yet were able to cause significant pathogenicity in the human population. Better tools are needed to elucidate the mechanism of infection for these crossover events. Conventional tools to study and characterize virus, such as next generation sequencing, genome amplification (RT-PCR), and serological antibody testing, are not adequately suited to rapidly mutating pathogens like Influenza virus where the success of infection heavily depends on the phenotypic expression of surface glycoproteins. Bridging the gap between genome and pathogenic expression remains a challenge. Mutations in PCR primer or probe binding regions significantly impact diagnostic sensitivity and often result in false-negative results [10]. And producing and harvesting strain specific antibodies is a labor and time intensive process plagued by low sensitivities [11, 12]. However, these techniques remain the gold standard for Influenza virus diagnosis, providing guidance for current epidemiological tracking and vaccine strain selection. Recent incremental progress on more complex techniques, such as digital electrochemical enzyme-linked immunoassay (ELISA), for Influenza virus which has a low detection limit [13, 14]. In addition, glycan microarrays are employed to determine binding specificities on a diverse set on glycan configurations [15, 16], but the synthesis and/or purification of well characterized oligosaccharides may be time consuming and prohibitively complex for many diagnostic device labs.

There remains a great need for a paradigm shift in approach to influenza virus diagnostic and characterization techniques. The future of single-molecule biosensors depends on high spatial resolution and immobilization of viable virus to achieve enhanced molecular information, dynamic interactions, and detection sensitivity [17]. The development of open platform technologies is sorely needed to allow for the rapid testing of a variety of unconventional tools, from novel antigenic testing to spectroscopy techniques. Some groups have demonstrated the merit of such techniques by immobilizing isolated Influenza virus sourced antigens to study binding affinity and dynamic binding of Influenza HA and NA to sialic acid [18, 19]. Others have used an impedimetric-based detector to differentiate between species of Influenza A virus [20, 21]. Yet, to the best of our knowledge, universal Influenza binding for glycoprotein characterization studies on viable, whole virus has not been realized without the use of serotype specific antibodies or species-specific galactose residues. These studies would require the capture and immobilization of all Influenza virus present, agnostic to the specific strain or serotype. This has motivated the development of the novel capture coating in this study, allowing for universal Influenza virus immobilization.

In addition, the evolution of the capture coating design was particularly motivated by the advancement of vibrational spectroscopy techniques, such as infrared spectroscopy, Raman spectroscopy, surface enhanced Raman spectroscopy, and tip enhanced Raman spectroscopy. These techniques are capable of detecting molecular-level phenotypic changes such as those that occur during a viral envelope protein mutation. For example, Sun et al. used surface enhanced Raman spectroscopy (SERS) based immunosensing techniques to detect clinically isolated Influenza A down to 10 pfu/mL [22]. For the cleanest spectra, consideration must be given to the potential background signal created by the immobilization technique used. This motivated the pursuit of an avidin-biotin complex-based technique that can be layered onto optical spectroscopy compatible substrates, such as glass and sapphire, for greater flexibility in data acquisition techniques. Furthermore, application directly to glass and similar substrates would facilitate a variety of microfluidic integrations that befit from virus immobilization, including interrogation for virus characterization and diagnosis or high throughput drug screening.

Towards this end, this study demonstrates the successful development of a novel universal Influenza virus capture coating that harnesses sialic acid binding to capture viable whole Influenza virus. A strong base layer of avidin biotin complex (ABC) binding combined with a biomimicking pegylated sialic acid tether is utilized to capture and immobilize the virus relative to the substrate in an aqueous environment without compromising the structural or functional integrity of the virus itself. In this study we confirm virus capture using fluorescent probes and atomic force microscopy (AFM).

Materials and methods

Reagents and biologics

Biotinylated bovine serum albumin (bBSA), avidin, blocker BSA, and serotype specific anti-Influenza virus FITC conjugated antibody probes were sourced from Thermo Fisher Scientific (PA1-73044, PA1-73047, PA1-73036). The custom assay probes are biotinylated polyethylene glycol (MW 2000) conjugated with sialic acid (bPEG2kSA), produced by Nanocs, Inc. The non-binding assay probe control is biotinylated polyethylene glycol (MW 2000) conjugated with thiol (bPEG2kSH), also produced by Nanocs, Inc. Virus strains were acquired from ATCC (IAV H1N1 A/Virginia/ATCC1/2009, IAV H3N2 A/Victoria/3/75, B Yamagata B/Wisconsin/1/2010, and B Victoria B/Florida/78/2015), rehydrated and diluted in PBS 1x and stored at -80°C with glycerol until thawed for experimental use.

Avidin-biotin sialic acid capture coating fabrication

1000μg/mL bBSA in PBS was adsorbed onto hydrophobic substrate (black-walled non-treated polystyrene microplate or sapphire slide) via incubation at 37°C for 2 hours. Substrate was then rinsed with PBS and incubated with 40mg/mL blocker BSA in PBS for 1 hour at 37°C. Substrate was again rinsed and incubated with 100 μg/mL avidin in PBS for 1 hour at 4°C followed by another rinse and incubation with 10 μM bPEG2kSA (or 10 μM bPEG2kSH) in PBS for 1 hour at 4°C. Substrate underwent a final rinse with PBS, sealed, and stored at 4°C for up to four weeks without noticeable capture efficiency loss.

Virus preparation

On testing days, virus stock was removed from -80°C storage and thawed in a 37°C water bath. All stocks consisted of PBS-diluted active virus originating from either pooled allantoic fluid or MDCK propagation supernatant sourced from the supplier, ATCC. Prepared substrates were removed from 4°C storage at this time and brought to room temperature. Once thawed, virus stocks were further diluted in PBS as required to achieve final concentration and incubated on capture coated substrate at 37°C for 1 hour followed by a PBS wash.

Capture coating optimization

Concentrations of bBSA and avidin were systematically varied from 0 μg/mL to 1000μg/mL and bPEG2kSA varied from 0 μM to 100 μM to optimize capture coating efficiency to the final concentrations described under Avidin-Biotin Sialic Acid Capture Coating Fabrication (Table 1 and S1 Table). Serotype specific (H1N1, H3N2, B) anti-Influenza virus FITC conjugated antibody probes were used to detect Influenza virus immobilized on the capture coating. Fluorescent images were captured for each well of a black walled microplate during exposure with an X-CITE 120 fluorescent illuminator fitted with a 480 nm excitation filter with a focal point power of 8.1 mW. Emission was imaged with a SPOT Insight camera through a 40x Nikon Plan Fluor objective and SPOTAdvanced software set to a 519 nm monochrome colorizing palette. Relative fluorescent unit measurements were made using ImageJ opensource software on the captured images. Statistical p values shown in Table 1 and S1 Fig were calculated using a Welch’s t-test with a threshold of α = 0.05 on the log10 transformation of the fluorescence data. Fluorophore-conjugated antibodies have been determined to have intensity measurements that follow a lognormal distribution [23]. The geometric mean was then calculated by taking the antilog of the mean log10 transformed data and reported with the geometric standard deviation in Table 1 and S1 Fig.

thumbnail
Table 1. Fluorescence readings from anti-influenza FITC probes reveal the optimal bPEG2kSA concentration to be 10 μM.

https://doi.org/10.1371/journal.pone.0247429.t001

Atomic force microscopy

As an additional confirmation of capture coating efficacy, Atomic Force Microscopy (AFM) was used to image Influenza virus immobilized on the capture coating. A double side polished 460μm thick c-plane sapphire wafer (MSE Supplies) was cut into approximately 3/4” square pieces and layered with capture coating according to Avidin-Biotin Sialic Acid Capture Coating Fabrication protocol and incubated with Influenza virus according to Virus Preparation. Following incubation, slides were gently washed with sterile DI water and allowed to dry under the hood. Sapphire slides with immobilized virus were then placed on the stage of a Park Systems XE series AFM and imaged in soft non-contact mode using an approximately 30nm diameter cantilever probe (Applied NanoStructures, Inc.) with Park Systems XE software. AFM images were processed, and influenza virus particles counted and characterized using Gwyddion open source software for SPM data analysis. Each AFM image was leveled using Gwyddion mean plane subtraction, scars corrected, and background subtracted such that the minimum value was set at zero microns. Using the mark grains feature, a threshold was set to 100 nm height and a 70 nm equivalent radius (req) filter applied to account for the 30nm radius AFM probe tip causing broadening edge artefacts of the typically 40–100 nm radius Influenza virus particles. Particles were counted by their req properties. Those with a req larger than 150 nm were double counted as a clustered pair of viruses. An example of this process is depicted in S3 Fig. In addition to the req, height above capture coating was recorded for each virus.

Results and discussion

Capture coating development and optimization

The virus capture coating of the immobilization platform (Fig 1) is comprised of bPEG2kSA linked to bBSA with avidin. Concentration combinations of the three coating components (bBSA, avidin, and bPEG2kSA) were investigated to find the optimal concentration based on viral binding performance. This was accomplished by first determining effective combinations of bBSA and avidin. Twenty-five concentration combinations of immobilized bBSA and FITC-conjugated avidin were evaluated by fluorescence imaging. Black-walled non-treated polystyrene microplates were used to prevent fluorescence emission from leaking into adjacent wells during imaging. Fluorescence readings for the FITC-biotin probe provided many promising combinations, as shown by high levels of fluorescence (green) in the upper left triangle of the test matrix, S1 Table. Higher fluorescence readings indicate a higher quantity of potential binding sites for the next layer of bPEG2kSA tether. This agrees with other similar ABC based protocols in literature commonly using avidin to biotin ratios ranging from 1:1 to 1:10 [2426]. Avidin-biotin binding was chosen as the base of our capture coating because of its many advantageous properties. It is one of the strongest known non-covalent bonds between a protein and ligand with a high degree of affinity (KD ≈ 10−15 M) and specificity [27]. Avidin and biotin are widely available reagents with an interaction that is stable over a wide range of temperatures and pH, providing a robust base that would allow for a variety of downstream testing on captured virus.

thumbnail
Fig 1. Capture coating schematic depicting the layers of the custom avidin-biotin complex adsorbed to optically polished, c-cut sapphire slide windows.

The hemagglutinin (HA) glycoproteins on the envelope of the Influenza virus bind sialic acid of the functionalized biotin-PEG linker (structural formula shown, insert, was provided by the supplier, Nanocs, Inc.).

https://doi.org/10.1371/journal.pone.0247429.g001

Next, substrates were prepared with candidate bBSA/avidin combinations and incubated with different concentrations of bPEG2kSA. The binding performance of each coating was assessed for three influenza virus strains (A H1N1, A H3N2, and B Yamagata) using serotype specific FITC conjugated anti-influenza probes. The FITC conjugated anti-influenza probes were raised against similar strains as each of the three used in this work (anti-H1N1, anti-H3N2, and anti-B Yamagata). Table 1 shows the relative fluorescence intensity values for different concentrations of bPEG2kSA with 104 CEID50/mL (IAV H3N2 and IBV Yamagata) or 104 PFU/mL (IAV H1N1) of virus. These experimental strains were chosen as representatives of major Influenza serotypes currently endemic in the human population–IAV H1N1, IAV H3N2, and IBV Yamagata, respectively. Results indicate that each of the experimental strains of Influenza virus were best immobilized using 10 μM of bPEG2kSA receptor with 1000 μg/mL bBSA and 100 μg/mL avidin, as indicated by having significantly higher fluorescent reading compared to the 0 μM bPEG2kSA controls (IAV H1N1 p = 0.041, IAV H3N2 p = 0.032, IBV Yamagata p < 0.001). In addition, IAV H3N2 showed significant capture via fluorescence detection at 100 μM bPEG2kSA (p = 0.031), however this was not the case for the other two strains at the same receptor concentration. The high standard deviation of these fluorescence tests, especially at the higher 100 μM bPEG2kSA concentration, may be due to steric hindrance effects caused by a high concentration of receptors. Steric hinderance may be why 10 μM of bPEG2kSA receptor significantly outperformed a higher concentration of 100 μM bPEG2kSA receptor. Other less successful avidin/bBSA combinations with bPEG2kSA are not shown.

Successful immobilization of the representative strains demonstrates proof of concept for this novel capture coating technique to be used universally with Influenza viruses type A and B. Furthermore, detection of Influenza in the concentration demonstrated, 104 PFU/mL or CEID50/mL depending on strain used, points toward potential clinical use of this novel immobilization platform. The limit of detection for point of care Influenza virus detection tests has been found to range from 5.4 to 8.9 log copies/mL and 4.8 to 7.3 log copies/mL for Influenza H3N2v and H7N9 viruses strains, respectively [28]. These findings track well with 105 to 107 RNA copies per mL of mean viral load found in human nasopharyngeal isolates [29]. Using an established conversion rate of 20–60 viral genome copies needed per PFU [30], this amounts to a typical clinical range of 104 to 106 PFU/mL in a clinical isolate. A control experiment using an alternative thiol-functionalized bPEG2kSH tether was used to ensure that the Influenza virions were binding to the sialic acid tether and not simply being caught in the tendril-like structures of the capture coating. Results, S1 Fig, show consistently lower fluorescence values in this non-binding control coating for all Influenza strains tested compared to the bPEG2kSA tether. Using FITC probes as a quantitative analog to virus concentration was not possible because the different serotype specific anti-Influenza FITC probes used may vary in binding affinity and fluorescence levels across strains.

To our knowledge, this is the first known successful use of the bPEG2kSA molecule in an ABC-based capture coating designed specifically for universal immobilizing infectious virus. Past studies have often used fetuin and/or mucin as a viral receptor, due to an abundance of endogenous sialic acid end chains, in order to study Influenza virus binding characteristics [3133]. In these cases, the endogenous receptors do not permanently immobilize the virus due to the release mechanism of the vial NA protein. While useful to study binding kinetics, this release mechanism would hinder interrogation by any technique that requires a highly spatially resolved location of the virus, such as super resolution microscopies and spectroscopies. This effect may notably be incompatible in a high laminar flow environment such as a microfluidic. Specifically, in the case of molecular spectroscopies such as Raman spectroscopy and infrared spectroscopy, molecules like fetuin and mucin add an uncontrolled layer of variable molecular makeup that is much more difficult to deconvolve from spectra than well-regulated proteins and molecules like biotin, avidin, and PEG.

A related pegylated sialic acid was recently used to study dynamic binding of HA and NA to sialic acid, including a demonstration of the irreversibility of HA binding in the absence of NA cleaving activity [18], also previously described by Guo et al. [34]. Similarly, our biotinylated polyethylene glycol (MW 2000) conjugated with sialic acid (bPEG2kSA) for virus capture was configured without the addition of a galactose-sialic acid linkage to prevent NA cleaving the virus from the pegylated sialic acid tether. This cleaving allows for the severance of progeny virus from the infected host cell in vivo [35]. However, it has been shown that this action causes unstable binding of virus in vitro as HA mediated binding competes with NA mediated cleaving [36]. Future iterations of this platform may explore incorporating a galactose-sialic acid functionalized end chain with either an α2,6 or α2,3 glycosidic linkage. This may allow for studying the HA mediated binding and NA mediated cleaving of Influenza strains originating from different host species. However, for the scope of this research, only human strains preferential to α2,6 were used, and the glycosidic linkage was not included in the bPEG2kSA probe to prevent NA mediated cleaving.

AFM visualization and analysis

The developed capture coating was characterized using Atomic Force Microscopy (AFM) imaging and topography analysis. While AFM is not practical in a clinical diagnostic setting, it provides valuable validation of Influenza virus capture and allows for characterization of the capture coating itself which lead to the calculation of the coating’s capture efficiency. Fig 2 displays topographical images and profile analysis results comparing images of the sapphire substrate (Fig 2A), capture coating on sapphire substrate without virus (Fig 2B), a cluster of Influenza A H3N2 virions immobilized by capture coating on sapphire substrate (Fig 2C), and a single Influenza A H3N2 virion immobilized by capture coating on sapphire substrate (Fig 2D). The measured height of the individual virion, 36 nm, and diameter, 160 nm, agree well with the known size of Influenza virus given the relatively large diameter (~30 nm) of the AFM probe tip causing a broadening edge artefact in the diameter measurement [3740]. Throughout these studies multiple 50 x 50 μm, 10 x 10 μm, and 1 x 1 μm AFM images were taken. Using Gwyddion software, virus height and radius were taken for each virus captured. These distributions are plotted in S4 Fig.

thumbnail
Fig 2. 3D AFM topography images with corresponding 1D profiles through dashed lines as shown.

A) 460 μm sapphire c-cut slide. B) Capture coating on sapphire slide. C) Influenza A H3N2 virus cluster immobilized in capture coating on sapphire slide. The tendrils of the capture coating bPEG2kSA receptor tethers are clearly seen. D) A 2D example image of one of many single virions (this one Influenza A H3N2) immobilized in capture coating. 2DFFT analysis for all four AFM scans shown in S2 Fig.

https://doi.org/10.1371/journal.pone.0247429.g002

Further, roughness parameters were extracted from these profiles using Gwyddion software and are summarized in Table 2. Differences in sapphire substrate and capture coating profiles support successful deposition of the capture coating onto the substrate. The average roughness (Ra) increased by approximately 24 nm which agrees well with the estimated 20–30 nm thickness of the bBSA-avidin-bPEG2kSA coating combination. The regularly spaced and spiked profile of the capture coating also indicates successful adsorption of the bBSA and subsequent orientation of the avidin and bPEG2kSA binding to create tendril-like protrusions from the substrate surface. These protrusions are better visualized surrounding the AFM image of a cluster of influenza virions (Fig 2C) which support the capture coating design and execution first depicted in Fig 1. The apparent embedding of the virus into the capture coating is likely due to the brief drying out of the slides before AFM interrogation, causing the PEG tethers to crumple under the weight of the virion. It should be noted that features in the AFM topography images and subsequent roughness parameters may be smaller than they appear due to the relatively large diameter (~30 nm) of the AFM probe tip causing broadening edge artefacts [37].

thumbnail
Table 2. Parameters characterizing surface features and roughness of samples from Fig 2.

https://doi.org/10.1371/journal.pone.0247429.t002

Capture efficiency

The capture coating of the virus immobilization platform utilized a unique bPEG2kSA linker that provides a biomimicking sialic acid receptor for Influenza HA to bind to. Capture efficiency was calculated for each of the four virus strains. When the total number of virus particles applied to the substrate is less than that which can fully occupy the substrate surface, capture efficiency (CEff) is defined as the ratio of virus particles captured over virus particles applied, Eq 1.

(1)

Where the number of virus particles bound to the substrate, Pbound = S*C with S being the substrate size factor (total substrate area/size of the AFM scan area) and C the virus particle count from AFM image. To determine the virus particle count from an AFM image, a 10 x 10 μm2 AFM scan was analyzed for each of the four Influenza virus strains. Virus particles present were counted using Gwyddion’s mark grain feature with minimum thresholds set at 120 nm height and 70 nm equivalent radius to account for the 30nm radius AFM probe tip causing broadening edge artefacts. A demonstration of particle counting via AFM image with Gwyddion mark grain feature is provided as S3 Fig. For each Influenza strain, n = 3 AFM images were analyzed for particle count and the mean taken. The total number of virus particles applied to the substrate Ptotal = n*I, where n is the number density of virus particles in the stock solution and I is the volume of sample applied to the substrate. The number density is calculated from the infectious virus concentration of the virus stock [V] multiplied by a conversion factor. For virus concentration in PFU/ml, n = [V]*CTPR, where CTPR is the virus particle “count to PFU ratio” found in previous studies [41, 42]. When the virus concentration is CEID50/ml, n = [V]*PtC*CTPR, where PtC is the PFU to CEID50 ratio conversion factor.

Results and inputs parameters used to calculate the capture coating efficiency are detailed in Table 3. For this work, it is estimated that the total number of virus particles incubated for 1 hour on a functionalized slide (Ptotal = 2.29x107, 5.14x106, 2.00x108, 1.39x108) was less than the total number of available binding sites (Itotal = 1.03x1010, 9.02x108, 1.03x1010, 1.03x1010) for IAV H3N2, IAV H1N1, IBV Yamagata, and IBV Victoria, respectively. Capture efficiency (CEff) ranged from 90.0% to 99.7%. These promising results are likely due to the irreversibility of HA binding to sialic acid in absence of active NA cleaving [18] or due to strong avidity from bivalent [43] or multivalent binding of sialic acid by individual Influenza virions [36, 4446]. Multivalent binding of Influenza virus to our capture coating may be caused by multiple bPEG2kSA binding to a single avidin molecule in the ABC complex. Alternatively, the 333 nm peak spacing found via the AFM topography data had a standard deviation of 90 nm. The influenza virus may also be showing preference to binding locations where multiple bPEG2kSA binding locations are within reach, providing access for multivalent binding. These results demonstrate the strong immobilization capability of this novel bPEG2kSA capture coating. However, this strong binding capability was generated under ideal, static incubation conditions and should be further vetted through flow cell observations beyond the scope of this study.

thumbnail
Table 3. Parameters and calculated values of capture efficiency (CEff) for each Influenza strain.

https://doi.org/10.1371/journal.pone.0247429.t003

Sialic acid is a common binding receptor used by a variety of viruses to initiate host cell entry. Since the goal of this research was to create a universal infectious virus Influenza immobilization platform, the sialic acid functionalized bPEG probe was synthesized without galactose and, therefore, without the NA glycosidic linkage cleaving site. While this work was limited to just a single conformation of bPEG2kSA, advanced binding studies may be done by altering the glycan chemistry, such as functionalizing the PEG with a α2,6 glycosidic conformation favored by human pathogenic Influenza virus or, alternatively, an avian Influenza favored α2,3 glycosidic linkage. In addition, further studies may open the possibility to use this capture coating with other SA binding virus families such as adenovirus and coronavirus, amongst others [43, 47]. Like Influenza virus (Kd = μM-pM) [48], adenovirus (Kd = 19 μM) [47], and some coronaviruses (Kd = 49.1 μM) [49] multivalently bind to SA with Kd in a high affinity range.

Together, these fluorescence and AFM studies show the first successful use of a novel ABC based sialic acid capture coating for universal Influenza virus immobilization and its potential as a diagnostic tool platform. An avidin-biotin complex base with a biotin-PEG-sialic acid functionalized surface was utilized to create an Influenza virus capture coating capable of immobilizing whole virus while keeping the virion intact. Atomic Force Microscopy studies confirmed and described the profile of the capture coating as well as demonstrated the ability of using the capture coating to help characterize a single Influenza virus by AFM topography. From AFM topography data we were able to determine the capture efficiency of the capture coating to be above 90% of virus particles at a concentration of 105 CEID50/mL. We hope this capture coating technique creates an adaptable platform for further characterization of virus and development of novel phenotype diagnostic techniques.

Supporting information

S1 Fig. Fluorescent tagging was used to assess the novel bPEG2kSA capture coating against a non-binding control (bPEG2k functionalized with a thiol group, SH).

A) Schematic of experimental set up. Influenza virus were incubated on capture coating or control coating, rinsed, and tagged using FITC conjugated anti-Influenza HA antibodies. B) Fluorescence results in relative fluorescence units (RFU). Numbers reported as geometric mean and geometric standard deviation (GSD) (* = p < 0.05, ** = p < 0.01, *** = p < 0.001).

https://doi.org/10.1371/journal.pone.0247429.s001

(TIF)

S2 Fig. Corresponding 2D FFT analysis on AFM images from Fig 2.

A) 460 μm c-cut sapphire slide. Image suggest spatial features of a repeated, relatively smooth texture. B) Capture coating on sapphire slide. Image suggests spatial features of a repeated, dotted, and quite messy texture. C) Clump of Influenza A H3N2 virion immobilized by capture coting on sapphire slide. The image suggests the virion has a gaussian-like shape with a randomly rough texture within a small variation of the larger gaussian surface. Similarly, D) shows a single Influenza A H3N2 virion immobilized by capture coating on sapphire slide. All 2D FFT analysis was conducted using Gwyddion open source SPM analysis software on captured AFM.tiff images.

https://doi.org/10.1371/journal.pone.0247429.s002

(TIF)

S3 Fig. Virus particle counting for CEff calculations was carried out using the Gwyddion SPM analysis software.

A 10 μm x 10 μm AFM image of immobilized 105 CEID50/mL IBV Yamagata on capture coating was imported processed. (A)The image was leveled using Gwyddion mean plane subtraction, scars corrected, and background subtracted such that the minimum value was set at zero microns. (B) Using the mark grains feature, a threshold was set to 100 nm height and a 70 nm equivalent radius (req) filter applied to account for the 30nm radius AFM probe tip causing broadening edge artefacts of the typically 40–100 nm radius Influenza virus particles. The mask is colored in pink against a grey excluded background. (C) Particles were counted by their req properties. Those with a req larger than 150 nm were double counted as a clustered pair of viruses. This image resulted in a count of 16 IBV Yamagata particles in the given frame.

https://doi.org/10.1371/journal.pone.0247429.s003

(TIF)

S4 Fig. Height and radius distributions of virus immobilized by capture coating.

The mean radius and height of each strain was not significantly different than each other strain and were as follows (height, radius): IAV H1N1 (34.16 nm, 42.98 nm), IAV H3N2 (57.75 nm, 53.52 nm), IBV Victoria (41.44 nm, 47.78 nm), and IBV Yamagata (37.68 nm, 51.59 nm).

https://doi.org/10.1371/journal.pone.0247429.s004

(TIF)

S1 Table. Fluorescence readings from FITC-biotin probes used to screen for acceptable bBSA and avidin concentration combinations used for further capture coating testing.

Fluorescence values were obtained by subtracting residual fluorescence values from the 0 μg/mL bBSA and 0 μg/mL avidin control and colormetrically scaled. Fluorescent images were captured for each well of a black walled microplate during exposure with an X-CITE 120 fluorescent illuminator fitted with a 480 nm excitation filter with a focal point power of 8.1 mW. Emission was imaged with a SPOT Insight camera through a 40x Nikon Plan Fluor objective and SPOTAdvanced software set to a 519 nm monochrome colorizing palette. Fluorescent unit measurements were made using ImageJ opensource software on the captured images.

https://doi.org/10.1371/journal.pone.0247429.s005

(TIF)

Acknowledgments

The authors would like to acknowledge the contributions of Dr. Gina Shreve and Chris Thrush.

References

  1. 1. Garten R, Blanton L, Elal AIA, Alabi N, Barnes J, Biggerstaff M, et al. Update: influenza activity in the United States during the 2017–18 season and composition of the 2018–19 influenza vaccine. Morbidity and Mortality Weekly Report. 2018;67(22):634. pmid:29879098
  2. 2. Taubenberger JK, Morens DM. 1918 Influenza: the mother of all pandemics. Revista Biomedica. 2006;17(1):69–79. pmid:16494711
  3. 3. Wasilewski S, Calder LJ, Grant T, Rosenthal PB. Distribution of surface glycoproteins on influenza A virus determined by electron cryotomography. Vaccine. 2012;30(51):7368–73. pmid:23063838
  4. 4. Skehel JJ, Wiley DC. Receptor binding and membrane fusion in virus entry: the influenza hemagglutinin. Annual review of biochemistry. 2000;69(1):531–69. pmid:10966468
  5. 5. Ivanovic T, Harrison SC. Distinct functional determinants of influenza hemagglutinin-mediated membrane fusion. Elife. 2015;4:e11009. pmid:26613408
  6. 6. Luo M. Influenza Virus Entry. In: Rossmann MG, Rao VB, editors. Viral Molecular Machines. Boston, MA: Springer US; 2012. p. 201–21.
  7. 7. Thompson CI, Barclay WS, Zambon MC, Pickles RJ. Infection of human airway epithelium by human and avian strains of influenza a virus. Journal of virology. 2006;80(16):8060–8. pmid:16873262
  8. 8. Yamada S, Suzuki Y, Suzuki T, Le MQ, Nidom CA, Sakai-Tagawa Y, et al. Haemagglutinin mutations responsible for the binding of H5N1 influenza A viruses to human-type receptors. Nature. 2006;444(7117):378. pmid:17108965
  9. 9. Nicholls JM, Chan RW, Russell RJ, Air GM, Peiris JM. Evolving complexities of influenza virus and its receptors. Trends in microbiology. 2008;16(4):149–57. pmid:18375125
  10. 10. Klungthong C, Chinnawirotpisan P, Hussem K, Phonpakobsin T, Manasatienkij W, Ajariyakhajorn C, et al. The impact of primer and probe-template mismatches on the sensitivity of pandemic influenza A/H1N1/2009 virus detection by real-time RT-PCR. Journal of Clinical Virology. 2010;48(2):91–5. pmid:20413345
  11. 11. Allwinn R, Preiser W, Rabenau H, Buxbaum S, Stürmer M, Doerr H. Laboratory diagnosis of influenza–virology or serology? Medical microbiology and immunology. 2002;191(3–4):157–60. pmid:12458351
  12. 12. Kim D-K, Poudel B. Tools to detect influenza virus. Yonsei medical journal. 2013;54(3):560–6. pmid:23549796
  13. 13. Wu Z, Guo W-J, Bai Y-Y, Zhang L, Hu J, Pang D-W, et al. Digital single virus electrochemical enzyme-linked immunoassay for ultrasensitive H7N9 avian influenza virus counting. Analytical chemistry. 2018;90(3):1683–90. pmid:29260556
  14. 14. Leirs K, Tewari Kumar P, Decrop D, Pérez-Ruiz E, Leblebici P, Van Kelst B, et al. Bioassay development for ultrasensitive detection of influenza a nucleoprotein using digital ELISA. Analytical chemistry. 2016;88(17):8450–8. pmid:27487722
  15. 15. Council NR. Transforming glycoscience: a roadmap for the future: National Academies Press; 2012.
  16. 16. Stevens J, Blixt O, Paulson JC, Wilson IA. Glycan microarray technologies: tools to survey host specificity of influenza viruses. Nature Reviews Microbiology. 2006;4(11):857–64. pmid:17013397
  17. 17. Akkilic N, Geschwindner S, Höök F. Single-molecule biosensors: Recent advances and applications. Biosensors and Bioelectronics. 2020:111944. pmid:31999573
  18. 18. Reiter-Scherer V, Cuellar-Camacho JL, Bhatia S, Haag R, Herrmann A, Lauster D, et al. Force Spectroscopy Shows Dynamic Binding of Influenza Hemagglutinin and Neuraminidase to Sialic Acid. Biophysical journal. 2019.
  19. 19. Xiong X, Coombs PJ, Martin SR, Liu J, Xiao H, McCauley JW, et al. Receptor binding by a ferret-transmissible H5 avian influenza virus. Nature. 2013;497(7449):392. pmid:23615615
  20. 20. Wicklein B, del Burgo MÁM, Yuste M, Carregal‐Romero E, Llobera A, Darder M, et al. Biomimetic architectures for the impedimetric discrimination of influenza virus phenotypes. Advanced Functional Materials. 2013;23(2):254–62.
  21. 21. Hushegyi A, Pihíková D, Bertok T, Adam V, Kizek R, Tkac J. Ultrasensitive detection of influenza viruses with a glycan-based impedimetric biosensor. Biosensors and Bioelectronics. 2016;79:644–9. pmid:26765527
  22. 22. Sun Y, Xu L, Zhang F, Song Z, Hu Y, Ji Y, et al. A promising magnetic SERS immunosensor for sensitive detection of avian influenza virus. Biosensors and Bioelectronics. 2017;89:906–12. pmid:27818055
  23. 23. Mutch SA, Fujimoto BS, Kuyper CL, Kuo JS, Bajjalieh SM, Chiu DT. Deconvolving single-molecule intensity distributions for quantitative microscopy measurements. Biophysical journal. 2007;92(8):2926–43. pmid:17259276
  24. 24. Farina L, Iacobello C, Orlandini S, Ius A, Albertini A. The effect of the concentration ratio of avidin and biotin on a single step sandwich enzyme immunoassay. Annals of clinical biochemistry. 1993;30(1):87–9. pmid:8434873
  25. 25. Kuhn P, Eyer K, Robinson T, Schmidt FI, Mercer J, Dittrich PS. A facile protocol for the immobilisation of vesicles, virus particles, bacteria, and yeast cells. Integrative Biology. 2012;4(12):1550–5. pmid:23147942
  26. 26. Stamou D, Duschl C, Delamarche E, Vogel H. Self‐assembled microarrays of attoliter molecular vessels. Angewandte Chemie International Edition. 2003;42(45):5580–3. pmid:14639720
  27. 27. Green N. Avidin. 1. The use of [14C] biotin for kinetic studies and for assay. Biochemical Journal. 1963;89(3):585. pmid:14101979
  28. 28. Chan K-H, To KK, Chan JF, Li CP, Chen H, Yuen K-Y. Analytical sensitivity of seven point-of-care influenza virus detection tests and two molecular tests for detection of avian origin H7N9 and swine origin H3N2 variant influenza A viruses. Journal of clinical microbiology. 2013;51(9):3160–1. pmid:23784125
  29. 29. Granados A, Peci A, McGeer A, Gubbay JB. Influenza and rhinovirus viral load and disease severity in upper respiratory tract infections. Journal of Clinical Virology. 2017;86:14–9. pmid:27893998
  30. 30. Yoshikawa T, Matsuo K, Matsuo K, Suzuki Y, Nomoto A, Tamura S-i, et al. Total viral genome copies and virus–Ig complexes after infection with influenza virus in the nasal secretions of immunized mice. Journal of general virology. 2004;85(8):2339–46. pmid:15269375
  31. 31. Lai JCC, Karunarathna HM, Wong HH, Peiris JS, Nicholls JM. Neuraminidase activity and specificity of influenza A virus are influenced by haemagglutinin-receptor binding. Emerging microbes & infections. 2019;8(1):327–38. pmid:30866786
  32. 32. Onkhonova G, Maltsev S, Ryzhikov A. Determination of the Binding Affinity of Virions of Pandemic Influenza A/California/7/2009 (H1N1pdm09) Virus for Fetuin and Mucin by the Competitive and Kinetic Methods. Biophysics. 2019;64(4):522–7.
  33. 33. Sakai T, Nishimura SI, Naito T, Saito M. Influenza A virus hemagglutinin and neuraminidase act as novel motile machinery. Scientific reports. 2017;7:45043. pmid:28344335
  34. 34. Guo H, Rabouw H, Slomp A, Dai M, van der Vegt F, van Lent JW, et al. Kinetic analysis of the influenza A virus HA/NA balance reveals contribution of NA to virus-receptor binding and NA-dependent rolling on receptor-containing surfaces. PLoS pathogens. 2018;14(8):e1007233. pmid:30102740
  35. 35. Krammer F, Smith GJ, Fouchier RA, Peiris M, Kedzierska K, Doherty PC, et al. Influenza (Primer). Nature Reviews: Disease Primers. 2018.
  36. 36. Müller M, Lauster D, Wildenauer HH, Herrmann A, Block S. Mobility-Based Quantification of Multivalent Virus-Receptor Interactions: New Insights Into Influenza A Virus Binding Mode. Nano letters. 2019. pmid:30719917
  37. 37. Raposo M, Ferreira Q, Ribeiro P. A guide for atomic force microscopy analysis of soft-condensed matter. Modern research and educational topics in microscopy. 2007;1:758–69.
  38. 38. de Pablo PJ. Atomic force microscopy of virus shells. Seminars in Cell & Developmental Biology. 2017. https://doi.org/10.1016/j.semcdb.2017.08.039.
  39. 39. Li S, Sieben C, Ludwig K, Höfer CT, Chiantia S, Herrmann A, et al. pH-Controlled two-step uncoating of influenza virus. Biophysical journal. 2014;106(7):1447–56. pmid:24703306
  40. 40. Marchetti M, Wuite G, Roos W. Atomic force microscopy observation and characterization of single virions and virus-like particles by nano-indentation. Current opinion in virology. 2016;18:82–8. pmid:27253691
  41. 41. Tabata KV, Minagawa Y, Kawaguchi Y, Ono M, Moriizumi Y, Yamayoshi S, et al. Antibody-free digital influenza virus counting based on neuraminidase activity. Scientific reports. 2019;9(1):1–13. pmid:30626917
  42. 42. Triana-Baltzer GB, Sanders RL, Hedlund M, Jensen KA, Aschenbrenner LM, Larson JL, et al. Phenotypic and genotypic characterization of influenza virus mutants selected with the sialidase fusion protein DAS181. Journal of Antimicrobial Chemotherapy. 2011;66(1):15–28. pmid:21097900
  43. 43. Neu U, Bauer J, Stehle T. Viruses and sialic acids: rules of engagement. Current opinion in structural biology. 2011;21(5):610–8. pmid:21917445
  44. 44. Xu H, Shaw DE. A simple model of multivalent adhesion and its application to influenza infection. Biophysical journal. 2016;110(1):218–33. pmid:26745425
  45. 45. Benton DJ, Martin SR, Wharton SA, McCauley JW. Biophysical measurement of the balance of influenza a hemagglutinin and neuraminidase activities. Journal of Biological Chemistry. 2015;290(10):6516–21. pmid:25586179
  46. 46. Cuellar-Camacho JL, Bhatia S, Reiter-Scherer V, Lauster D, Liese S, Rabe P Jr, et al. Quantification of Multivalent Interactions between Sialic Acid and Influenza A Virus Spike Proteins by Single-Molecule Force Spectroscopy. Journal of the American Chemical Society. 2020;142(28):12181–92. pmid:32538085
  47. 47. Nilsson EC, Storm RJ, Bauer J, Johansson SM, Lookene A, Ångström J, et al. The GD1a glycan is a cellular receptor for adenoviruses causing epidemic keratoconjunctivitis. Nature medicine. 2011;17(1):105–9. pmid:21151139
  48. 48. Casalegno J-S, Ferraris O, Escuret V, Bouscambert M, Bergeron C, Linès L, et al. Functional balance between the hemagglutinin and neuraminidase of influenza A (H1N1) pdm09 HA D222 variants. PLoS One. 2014;9(8):e104009. pmid:25119465
  49. 49. Tortorici MA, Walls AC, Lang Y, Wang C, Li Z, Koerhuis D, et al. Structural basis for human coronavirus attachment to sialic acid receptors. Nature structural & molecular biology. 2019;26(6):481–9. pmid:31160783