Skip to main content
Advertisement
  • Loading metrics

Overlaid positive and negative feedback loops shape dynamical properties of PhoPQ two-component system

Abstract

Bacteria use two-component systems (TCSs) to sense environmental conditions and change gene expression in response to those conditions. To amplify cellular responses, many bacterial TCSs are under positive feedback control, i.e. increase their expression when activated. Escherichia coli Mg2+ -sensing TCS, PhoPQ, in addition to the positive feedback, includes a negative feedback loop via the upregulation of the MgrB protein that inhibits PhoQ. How the interplay of these feedback loops shapes steady-state and dynamical responses of PhoPQ TCS to change in Mg2+ remains poorly understood. In particular, how the presence of MgrB feedback affects the robustness of PhoPQ response to overexpression of TCS is unclear. It is also unclear why the steady-state response to decreasing Mg2+ is biphasic, i.e. plateaus over a range of Mg2+ concentrations, and then increases again at growth-limiting Mg2+. In this study, we use mathematical modeling to identify potential mechanisms behind these experimentally observed dynamical properties. The results make experimentally testable predictions for the regime with response robustness and propose a novel explanation of biphasic response constraining the mechanisms for modulation of PhoQ activity by Mg2+ and MgrB. Finally, we show how the interplay of positive and negative feedback loops affects the network’s steady-state sensitivity and response dynamics. In the absence of MgrB feedback, the model predicts oscillations thereby suggesting a general mechanism of oscillatory or pulsatile dynamics in autoregulated TCSs. These results improve the understanding of TCS signaling and other networks with overlaid positive and negative feedback.

Author summary

Feedback loops are commonly observed in bacterial gene-regulatory networks to enable proper dynamical responses to stimuli. Positive feedback loops often amplify the response to stimulus, whereas negative feedback loops are known to speed-up the response and increase robustness. Here we demonstrate how combination of positive and negative feedback in network sensing extracellular ion concentrations affects its steady-state and dynamic responses. We utilize published experimental data to calibrate mathematical models of the gene regulatory network. The resulting model quantitatively matches experimentally observed behavior and can make predictions on the mechanism of negative feedback control. Our results show the advantages of such a combination of feedback loops. We also predict the effect of their perturbation on the steady-state and dynamic responses. This study improves our understanding of how feedback loops shape dynamical properties of signaling networks.

Introduction

Bacteria use two component systems (TCSs) to sense and respond to environmental stimuli [1, 2]. TCSs are also widely used in synthetic biology applications to sense specific stimuli and control gene expression [35]. A TCS consists of a sensor kinase often located on the inner membrane and a cognate response regulator protein located in the cytoplasm. The sensor kinase senses environmental stimulus and responds by autophosphorylating at the histidine residue [6]. Phosphorylated kinase catalyzes a transfer of phosphate to the response regulator. In the absence of activating conditions, sensor kinases sometimes have phosphatase activity, i.e. they can dephosphorylate the response regulator. The phosphorylated response regulator is transcriptionally active, initiating cellular response. As part of cellular response, the response regulator often activates transcription of genes encoding the two components themselves [7], creating a positive feedback loop.

The Mg2+ -sensing PhoPQ TCS is found in many bacterial species, such as Salmonella, Yersinia pestis and E. coli [814]. The sensor kinase PhoQ responds to low extracytoplasmic Mg2+ levels, acidic pH and antimicrobial peptides. In high Mg2+, the periplasmic sensing domain of PhoQ is bound to Mg2+ resulting in a conformation of PhoQ that has low autokinase activity but high phosphatase activity towards phosphorylated PhoP (PhoP-P) [8]. That keeps the expression of PhoP-P-dependent genes low. In response to Mg2+ limitation, dissociation of Mg2+ from PhoQ promotes a conformational change that increases the autokinase activity and suppresses the phosphatase activity [15]. That leads to accumulation of PhoP-P and increase in the expression of its regulon. PhoP-P regulons vary significantly between different bacterial species but retain a few common features. First, the PhoPQ TCS upregulates transcription of its own operon phoPQ. This upregulation leads to a positive feedback in the system. Second, PhoP activates transcription of a small integral membrane protein, MgrB in E. coli, Klebsiella pneumoniae, Salmonella, Yersinia pestis that limits kinase activity (Fig 1) [1620]. These interactions form a negative feedback loop.

thumbnail
Fig 1. PhoPQ two component system senses low Mg2+ concentrations through direct interactions with PhoQ.

(A) When activated by low external Mg2+ PhoQ undergoes autophosphorylation, transfers phosphoryl group to PhoP which activates transcription of downstream genes. PhoP positively regulates transcription of phoPQ operon, as well as mgrB. MgrB binds PhoQ and suppresses kinase activity. (B) Normalized reporter output from PmgrB saturates as phoPQ operon transcription is increased. (C) Steady state normalized reporter output (PmgrB) plateaus as Mg2+ decreases, but increases further at growth limiting conditions (hypothetical normalized reporter output at growth limiting Mg2+, red square). Plot recreated from [21].

https://doi.org/10.1371/journal.pcbi.1008130.g001

How does positive autoregulation of PhoP/PhoQ affect phosphorylation level of PhoP? Notably, over a range of low Mg2+ concentrations, elimination of autoregulation of PhoPQ results in no significant difference in the PhoP-P activity measured via transcriptional reporter of the mgrB promoter [21]. This observation suggests that PhoP-P level is insensitive (robust) to increase of phoPQ operon production. This robustness was confirmed by monitoring PhoP activity reporter in a strain with a chemically inducible phoPQ promoter (Fig 1); increasing PhoPQ expression post wild-type level does not change the reporter level [21]. Previously published mathematical models show that this robustness arises due to bifunctionality of the kinase [2123]. However, these models may not be directly applicable for E. coli PhoPQ TCS as they do not account for PhoPQ interactions with MgrB protein. While the exact mechanism by which MgrB modulates PhoQ activity is unknown, MgrB specifically inhibits kinase activity through direct interaction [17]. A strain lacking both the mgrB gene and PhoQ-phosphatase activity shows higher promoter activity compared to a strain merely lacking the PhoQ-phosphatase activity [16]. Since overexpressing PhoQ could in-principle outcompete the inhibitory effect of MgrB, understanding robustness of PhoP-P to PhoPQ overexpression requires models that explicitly include negative feedback regulation.

Notably, robustness of PhoP activity to elimination of PhoPQ autoregualtion is no longer observed in growth-limiting Mg2+ levels (<10−3 mM) [21]. Furthermore, in these conditions, the PhoP activity greatly exceeds the activity observed over a range of low but not growth-limiting (between 1 and 0.01 mM) Mg2+ concentrations. Notably: PhoP activity is nearly the same over that range of Mg2+ levels forming a plateau between 1 and 0.01 mM Mg2+ following a gradual increase from 100 to 1 mM Mg2+. Such a plateau has been observed for multiple promoters with varying affinities to PhoP-P, suggesting this pattern is not a property of one particular promoter [9]. Interestingly, at 0.01 mM Mg2+ the levels of PhoP-P are such that the promoters remain far from saturation [9].

A combination of plateau in promoter activity over a range of low Mg2+ levels with further increased activity in growth-limiting Mg2+ can be referred to as biphasic dose-response (Fig 1). Miyashiro and Goulian hypothesize that this biphasic dose-response is indicative of Mg2+ binding to PhoQ at multiple sites with different affinities [9]. However, this hypothesis has not been tested experimentally or theoretically. Alternatively, feedback architecture might shape a biphasic dose-response. If negative feedback dominates over a range of low Mg2+ concentrations, while positive autoregulation is strongly activated only in growth-limiting Mg2+, we could perhaps expect steady state PhoP-P to display two phases of activation. Since it is unclear how overlaid positive and negative feedback loops shape observed dose-response, detailed mathematical models of PhoPQ TCS can be used to understand steady state PhoP-P as a function of Mg2+.

In this study, we use mathematical modeling to understand how positive and negative feedback loops interact to shape dynamical properties of the PhoPQ TCS in E. coli. First, we identify conditions under which PhoP-P remains robust to phoPQ overexpression even in presence of MgrB-mediated negative feedback. Next, we search for mechanisms underlying the biphasic dose-response. We use published temporal and steady state data for wild type and mutant E. coli strains to calibrate our models. Finally, we use these calibrated models to understand advantages of the overlaid positive and negative feedback design of the PhoPQ system. Taken together, this study shows how mathematical modeling and experimental data can be used together to understand the relationship between network structure and cellular function in bacteria.

Results

PhoPQ TCS can show robustness if MgrB is in excess of PhoQ

Structural sources of robustness to variation in species concentrations have been identified previously for mass-action reaction networks [23, 24]. Two component systems (TCSs) with bifunctional kinases are known examples of such biochemical networks. The concentration of phosphorylated response regulator can be robust to changes in total concentrations of sensory kinase and response regulator proteins [2224]. To ascertain if the biochemical reaction network of PhoPQ TCS meets the criteria for absolute concentration robustness (ACR) put forth by Shinar and Feinberg [24], we analyze the reaction network with or without MgrB (S1 Text). While a reaction network without MgrB did in fact meet the criteria to obtain ACR in the limit of negligible auto-dephosphorylation, the reaction network of PhoPQ with MgrB network did not (S1 Text). This analysis suggests that in contrast to a typical TCS featuring a bifunctional kinase, robustness to total protein concentrations is not theoretically predicted by the structure of the reaction network. To understand that result we note that ACR occurs due to ability of PhoQ to control both phosphorylation and dephosphorylation flux to PhoP. Increase in PhoQ level will increase both fluxes proportionally without affecting PhoP-P. On the other hand, when MgrB-mediated inhibition of kinase activity is present, increase in PhoQ concentration disproportionally increases dephosphorylation flux.

To find conditions under which PhoP-P could be robust to total-PhoPQ expression, we modify the PhoPQ model in ref [21] to explicitly include negative feedback regulation. We consider a system without positive feedback, i.e. with total-PhoPQ expression controlled independent of PhoP-P. To simplify steady state analysis of PhoP-P, we follow the approach used in ref [21] and break the model into two modules (Fig 2A). For the transcription module the input is PhoP-P and the output is total-MgrB. We use a standard Hill-function to describe how transcription rate of mgrB and correspondingly total MgrB concentration depends [PhoP-P](Eq 1). (1)

thumbnail
Fig 2. PhoP-P is robust to overexpression of PhoP, PhoQ.

A—Modified PhoPQ TCS interaction network shows PhoQ binding MgrB, repressing PhoQ autophosphorylation (red arrow marks suppressed rate compared to unbound PhoQ autophosphorylation). This forms the interaction module. The interaction module takes 3 inputs (i) Stimulus (autophosphorylation rate), (ii) Total PhoP (PhoQ is assumed proportional, and 1/40 times PhoP based on actual measurements) and (iii) Total MgrB. Total protein is represented by subscript T in all figures and text. The system is numerically solved for a steady state concentration of PhoP-P as a function of varying PhoP, PhoQ total. The interaction module is coupled with a transcription module representing negative feedback with PhoP-P as input and total MgrB concentration as output. B—The system is solved numerically for steady state concentration of PhoP-P as a function of varying PhoP (and PhoQ) total (blue). PhoP-P is robust to PhoP/PhoQ concentrations, increasing further when PhoQ concentration is large enough to overcome MgrB negative feedback. Over most of the range of PhoQ concentrations, MgrB ≈ MgrB-total indicating large stoichiometric excess MgrB (orange line). Robustness breaks when MgrB is no longer in large excess of PhoQ. Dashed line indicates PhoP concentration estimated from measurements of Ref. [25].

https://doi.org/10.1371/journal.pcbi.1008130.g002

Here denotes minimum MgrB concentration at basal expression of mgrB, fB represents maximal fold upregulation of MgrB while KB denotes half activation concentration of PhoP-P. The interaction module consists of the cycle of phosphorylation-dephosphorylation catalyzed by PhoQ and PhoQ-MgrB. For the interaction module the inputs are total-PhoP, PhoQ and MgrB as well as the stimulus level (i.e. autophosphorylation rate of PhoQ). Steady state is at the intersection of the two modules (S1 Fig). As in the model in ref [21], we assume total-PhoP/PhoQ ratio is constant, and this ratio is greater than 1 [25]. To model MgrB inhibition, we assume that when MgrB binds to PhoQ, its autophosphorylation rate (Fig 2A) decreases by a factor λ ≤ 1 and phosphatase activity increases by a factor γ ≥ 1 to allow for the possibility that MgrB might enhance phosphatase activity of PhoQ. The remaining rate constant parameters are assumed same for PhoQ and PhoQ-MgrB states.

With this model we investigate how steady state [PhoP-P] depends on total PhoP, PhoQ (see S2 Text for full analysis). Basal expression of MgrB ( in Eq 1) is a free parameter. For each value of we can solve the two modules for a range of total-PhoP, PhoQ values. We find that steady state [PhoP-P] is not in general robust (S1 Fig). However, at high values, PhoP-P can be robust over a limited range of total-PhoP (Fig 2B).

To understand how steady state PhoP-P can show robustness to only a limited range of total-PhoP, and only at high values, we look at phosphorylation and dephosphorylation fluxes of PhoP (S2 Text). Equating phosphorylation and dephosphorylation fluxes, we can obtain an expression for [PhoP-P] shown in Eq 2 (2)

In this equation, [PhoP-P] depends on concentration of free MgrB. Since concentration of free MgrB generally depends on concentration of PhoQ, there is no robustness. However, when MgrB is in large excess of PhoQ, the function simplifies to Eq 3. (3)

Here Cp is a combination of parameters as noted previously in refs [21, 22], and KD is the dissociation constant for [PhoQ-MgrB]. In this expression, [PhoP-P] then depends only on MgrB-total, which in turn depends on [PhoP-P] (Eq 1). Thus, steady state [PhoP-P] remains independent of total PhoQ, PhoP. Indeed, output ceases to be robust once [PhoQ]T ∼ [MgrB]T. This is illustrated by a plot of [MgrB]/[MgrB]T (Fig 2B). Notably, the robustness to PhoP/PhoQ overexpression can be observed despite variations in λ, KD or the ratio of PhoP:PhoQ (S2 Fig). Thus our model of PhoPQ-MgrB with negative feedback shows that robustness of [PhoP-P] to changes in total concentrations of PhoP/PhoQ is not due to the cycle of phosphorylation alone, but can be obtained if MgrB is much more abundant than the kinase PhoQ.

Models with autophosphorylation suppression by MgrB alone cannot explain biphasic dose-response

Given that the previous model of autophosphorylation suppression by MgrB can explain robustness of PhoP-P to total-PhoPQ levels, we explore steady state dose-response behavior of the model. Specifically, we investigate whether the model can recreate a biphasic dose-response, i.e. show an intermediate plateau (Fig 1C). To compare with experimental data of ref [21], we construct a detailed dynamic model with two reporter proteins YFP and CFP [9] (S5 Text). To calibrate the model, we fit simulated values of YFP:CFP to reported values from various experiments (Methods). Time-course measurements in wild-type cells switched from high to low Mg2+ levels (published in [16]) were used to fine tune temporal parameters. The Mg2+ step down experiment was also conducted with several mutant strains. Measurements from these mutant strains can serve as important biological constraints on the model. Thus, we simulate YFP:CFP values with in-silico mutants and fit to respective experimental values (Methods,S3 Fig).

Steady state values of YFP:CFP over a range of Mg2+ concentrations have also been measured for wild-type cells (published in [21]). We use these measurements to tune steady state parameters. In addition, we introduce a qualitative condition for greater reporter output at very high stimulus to recapitulate effects at growth limiting Mg2+ [21]. Normalized experimental data used, simulation protocols and parameter fitting procedure are described in Methods.

Over multiple parameter fitting attempts, the model could only show graded increase followed by a plateau in steady state promoter activity (S4 Fig). Thus, we hypothesize that models of PhoPQ-MgrB with more complex mechanisms are required to explain biphasic dose-response.

Models representing PhoQ with separate kinase and phosphatase conformations can explain biphasic dose-response

To explain biphasic dose-response, we constructed a model of PhoQ with an explicit Mg2+ sensing mechanism (S5 Text). While understanding of how Mg2+ modulates PhoQ activity is still incomplete in E. coli, research in Salmonella has suggested that a conformation change resulting from Mg2+ binding to PhoQ increases phosphatase activity [8]. Based on this finding we hypothesize two conformations of PhoQ: phosphatase (PhoQ) and kinase (PhoQ*) (Fig 3A). Extracellular Mg2+ binds to PhoQ* and drives a transition to PhoQ thus shutting off PhoP-P activity. We assume that extracellular Mg2+ concentration does not change over time and include it in the rate constant of switching from PhoQ* to PhoQ (Fig 3A) i.e. . For simplicity we assume that only the kinase conformation undergoes autophosphorylation and phosphotransfer steps, while only phosphatase conformation dephosphorylates PhoP-P. MgrB can bind both conformations of PhoQ independently, subsequently modulating one or more rates.

thumbnail
Fig 3. A two-state model of PhoPQ TCS can explain biphasic response.

A -Schematic of the two-state model. PhoQ exists in phosphatase (PhoQ) or kinase (PhoQ*) form, PhoQ* assumed to bind Mg2+ and switch to PhoQ. Concentration of Mg2+ in medium assumed constant, and absorbed into a pseudo-first order kinetic rate, k−1 (blue arrow). MgrB reversibly binds PhoQ/PhoQ*. B—Simulated output (normalized YFP:CFP; Methods) from the ODE model representing schematic in A with two rate constants suppressed in MgrB bound PhoQ. The pre-factor converts Mg2+ concentration (mM) to rate constant k−1(s−1). The affected rates are denoted by red arrows: switching rate from phosphatase to kinase (i.e. k1, PhoQ-Mg2+ dissociation), and autophosphorylation. Detailed balance condition is satisfied by assuming PhoQ-MgrB dissociation is suppressed by the same factor as k1. Simulated steady state output shows biphasic response to increasing signal.

https://doi.org/10.1371/journal.pcbi.1008130.g003

The mechanism for MgrB mediated suppression of PhoQ remains unknown. Thus, we sought to understand which combination of rates of the phosphorylation cycle is likely to be modulated by MgrB. To this end, we implemented multiple models with MgrB affecting different rate constants in each. With each model we simulate a time course of YFP:CFP following downshifts in Mg2+ for all the pairs of downshifts reported in Salazar et al [16] (S3 Fig). Time course simulations are performed for wild-type and in-silico mutants (S5 Text). In addition, we perform steady state dose-response simulations. We then obtain parameters that generate close fit with experimental data (Methods). We verify the accuracy of these parameters by performing Mg2+ downshift simulations with an in-silico mutant expressing mgrB constitutively, as well as a PhoQ-phosphatase activity lacking mutant (S5 Fig). If simulations qualitatively match experimental data for the two mutant strains, we consider those parameters for further analysis. In dose-response simulations, we look for a second phase of strong promoter activation at very low Mg2+ (10−4 mM).

We find the biphasic dose-response pattern (Fig 3B) and closest matches with all experimental data (S6 Fig) in models where MgrB suppresses two rates—(i) autophosphorylation and (ii) activation (PhoQ → PhoQ* transition; red arrows, Fig 3A). Simulated steady state reporter output as a function of signal (k−1) shows two distinct ranges of signal where output increases, separated by a plateau (Fig 3B). Notably, the specific value of the output at growth-limiting Mg2+ relative to the plateau level does not seem to affect the model’s ability to explain biphasic dose response (S7 Fig). Furthermore, this model is able to fit time-course data for wild-type and mutant strains as well (S6 Fig). Interestingly, models with any other combinations of rate constants modulated by MgrB are unable to reproduce this biphasic response to signal. Thus, our analysis isolates a potential mechanism for MgrB suppressing PhoQ kinase activity. Taken together, models with an explicit Mg2+ sensing mechanism and where MgrB modulates PhoQ phosphatase to kinase transition and autophosphorylation rates can explain the biphasic dose-response.

Additionally, to check the validity of our conclusions regarding the robustness to PhoP/PhoQ overexpression we repeated the analysis for two-state model. We find that the model shows a range in which variations in PhoP/PhoQ concentrations do not lead to significant changes in PhoP-P (S8 Fig). Furthermore, the model is able to fit the experimentally measured data on the response of PmgrB promoter to overexpression of phoPQ operon under inducer control reported by Miyashiro and Goulian [21].

Abundance of MgrB, strong suppression and slow transitions between PhoQ states together can create plateau in signal response

While this model can explain biphasic signal response, the mechanism behind a plateau at intermediate signal levels is not fully clear. To understand how steady state [PhoP-P] is insensitive to signal (k−1) in our model (Fig 4D), we simplify the model so that analytical solutions will be possible in different ranges of signal. We note that the biphasic response is not generic outcome of the structure of the model, but arises in specific parameter ranges. Our goal is to use analytical approximations to identify the parameter regimes in which biphasic dose-response is possible. Matching phosphorylation and dephosphorylation fluxes can then provide expressions for steady state PhoP-P (see S4 Text for complete analysis). Analyzing how these fluxes change as a function of signal ((Fig 4B and 4C) can clarify the mechanism behind PhoP-P plateau at k−1 values corresponding to 1-0.01 mM Mg2+ range (Fig 4D).

thumbnail
Fig 4. Understanding the biphasic dose-response possible in the two-state model of PhoPQ.

A—Reactions in PhoPQ-MgrB network. Dotted squares enclose 4 sub forms of PhoQ (Qph, Qkin, QBph, QBkin). 4 reactions outside the dotted squares have rates comparable to dilution due to growth. Each sub form dilutes with a rate kpd, while synthesis is only in the Q* form. B—Most significant fluxes at high Mg2+. Steady state [PhoP-P] is approximated by matching phosphorylation and dephosphorylation fluxes. Phosphorylation flux is proportional to 1/k−1, while dephosphorylation flux is approximately constant. C- Most significant fluxes at intermediate Mg2+. Phosphorylation flux is proportional to [B]Total and independent of k−1 while dephosphorylation flux is still approximately constant D- [PhoP-P] as a function of signal showing plateau at intermediate Mg2+. Blue line indicates simulated [PhoP-P] from the model in the previous section. Red dashed line shows approximate [PhoP-P] in the high Mg2+ range, and black dashed line shows the approximate plateau value of [PhoP-P] in the intermediate Mg2+ range. E- Fractions of total Q in the 4 catalytic forms.

https://doi.org/10.1371/journal.pcbi.1008130.g004

Phosphorylation and dephosphorylation fluxes depend on the concentrations of the two catalytic states of PhoQ—kinase and phosphatase—and their MgrB-bound counterparts (Fig 4A). In our model we find that over high to intermediate Mg2+, nearly all PhoQ molecules exist in MgrB-bound phosphatase state (PhoQ.MgrBph, Fig 4E). We analyze steady state concentrations of PhoQ forms at the limit of complete suppression (S4 Text). We consider the limit in which MgrB binds PhoQ and completely suppresses autophosphorylation (Fig 4A) and activation rate constant (gray arrows Fig 4A). PhoQ.MgrBph concentration only reduces by dilution due to growth. In our model we find that over high to intermediate Mg2+, nearly all PhoQ molecules exist in MgrB-bound phosphatase state (PhoQ.MgrBph, Fig 4E). Therefore, we neglect contribution of PhoQph to dephosphorylation of PhoP-P. Further, we assume that all the phosphate that enters the systems through autophosphorylation of PhoQ* transfers to PhoP (i.e. autodephosphorylation of PhoQ-P is negligible). The net phosphorylation flux of PhoP, then, is equal to autophosphorylation flux (proportional to PhoQ*). Dephosphorylation flux has two portions—phosphatase activity (proportional to [PhoQ.MgrB]), and dilution due to growth. The steady state [PhoP-P] is found by equating phosphorylation and dephosphorylation fluxes (S4 Text).

Thus, PhoP-P concentration depends on how [PhoQ*] and [PhoQ.MgrB] change as a function of k−1. This in turn depends on which fluxes dominate in signal ranges corresponding to high and intermediate Mg2+. We find that at high Mg2+, flux of [PhoQ*] deactivation (rate k−1) dominates over binding MgrB (rate kb[MgrB]; Fig 4B). In this range [PhoP-P] depends linearly on signal. An approximate analytical expression over a range of k−1 values corresponding to high Mg2+ matches simulated [PhoP-P] using parameters from the previous section (Fig 4D). Thus from high to intermediate Mg2+, the promoter output increases a few fold (Fig 3B). At intermediate Mg2+, however, flux of PhoQ* binding MgrB is much greater than deactivation (Fig 4C). In this range, [PhoP-P] depends on [MgrB]T (which in turn depends on [PhoP-P]) but not signal, Fig 4C). An analytical solution for a single steady state [PhoP- P]int independent of signal can be found (Fig 4D). Taken together, strong suppression of kinetic rates by excess MgrB and growth dilution shape biphasic dose response of PhoPQ.

Combination of positive and negative feedback increases range of sensitivity to signal

What advantages does this unusual combination of positive and negative feedback provide? We know from experimental observations that negative feedback creates partial adaptation and faster kinetics, while positive feedback amplifies output and helps cells survive in growth limiting magnesium. To find out how steady state behavior is shaped by overlapping feedback loops, we simulated steady state dose-response with only one feedback present at a time.

We find a narrow range of signal sensitivity with negative feedback absent, while a much wider range without positive feedback (Fig 5A and 5B). Thus, in addition to kinetic advantages, negative feedback keeps the system sensitive to changes in magnesium over a much wider range of concentrations. However, without positive feedback the maximum output is much lower than with both feedback loops present, validating experimental observations of strong stimuli activating positive feedback. Taken together we find that negative feedback allows the TCS to tune the competing activities of PhoQ with time (to create overshoot dynamics) as well as stimulus (biphasic dose-response).

thumbnail
Fig 5. Combination of positive and negative feedback increases range of sensitivity to signal.

A—steady state response of simulated promoter output (YFP, normalized to high Mg2+ YFP) for models with no positive feedback (black), no negative feedback (green) and both feedback loops (blue). B- Absolute value of sensitivity (log derivative of PhoP-P with respect to k−1, ) for model with no negative feedback (green) has the shortest range of signal sensitivity, while the wild-type model displays two phases of high sensitivity to signal.

https://doi.org/10.1371/journal.pcbi.1008130.g005

Negative feedback can suppress oscillations

In addition to increasing range of sensitivity to signal, we unexpectedly find that negative feedback through upregulation of mgrB may also prevent oscillations in the network. When investigating the dynamics of the responses for in silico mutants lacking negative feedback, i.e. with constitutive mgrB expression(Fig 6A), we discovered limit cycle oscillations are observed at intermediate signal levels. These oscillations are only seen for low mgrB expression rates, i.e. with MgrB level comparable to that in unstressed wild-type cells (Fig 6B). Notably, these oscillations are observed for all the parameter sets that fit experimental data and show a biphasic dose response for wild-type cells (S3 Text). However, the oscillations were absent for the wild-type dynamics, i.e. when negative feedback is present(Fig 6B, blue line). The result is unexpected since oscillations require negative feedback and in our case elimination of negative feedback leads to oscillations.

thumbnail
Fig 6. Removing upregulation of mgrB can result in oscillations in the two component system.

A—Model schematic of an in silico mutant expressing mgrB constitutively instead of being expressed from the PhoP-P dependent promoter PmgrB B—Simulations of PhoP-P following a switch from high (50 mM) to intermediate (1 mM) Mg2+ show oscillations if mgrB is expressed at constant but low levels. Oscillations are absent in wild-type models, as well as models expressing mgrB at a constant high rate.

https://doi.org/10.1371/journal.pcbi.1008130.g006

To understand the mechanism of the oscillations and why elimination of MgrB feedback create these we constructed a simplified model of the circuit (see S3 Text for detailed analysis). The result showed that oscillations arise from autoregulated expression of phoPQ operon, namely from PhoP-P dependent increase in PhoQ concentration. Indeed, since PhoQ is a bifunctional enzyme, autoregulation results in simultaneous positive and negative feedback [26, 27]. However, if PhoQ is first produced in a kinase conformation [16] and slowly switched to a phosphatase conformation, there will be a time-delay between the positive and negative component of the feedback. The fast positive and slow negative feedback leads to oscillations. Given that slow switching relative to effective MgrB-PhoQ binding rate (kb[MgrB]Tk−1, S4 Text) at intermediate Mg2+ is essential for our model to produce a plateau in dose-response, the time-delay and the resulting oscillations appear to be a robust prediction for constitutive mgrB. However, increase in MgrB concentration increases the fraction of PhoQ that is MgrB bound, speeding up PhoQ conversion to phosphatase state and thereby prevents oscillations by reducing the delay in the negative feedback. This is why oscillations are not observed when MgrB is upregulated by PhoP-P or when constitutive production of MgrB is too high (Fig 6B). Thus, we find that autoregulated PhoPQ TCS may use negative feedback through MgrB in order to avoid sustained oscillations in response to stimulus. Notably the oscillations are not a consequence of any particular model assumption, but rather seem to stem from a general mechanism that can be applicable to many autoregulated TCSs (as long as kinase conformation of the sensor is produced first and then slowly switches to phosphatase conformation). It remains to be seen if this mechanism can lead to oscillatory or pulsatile response for systems where it is physiologically beneficial.

Discussion

The output of some two-component systems with bifunctional kinases—phosphorylated response regulator protein—displays robustness to overexpression of the two proteins. Here we show that this property can extend to PhoPQ TCS which regulates the gene encoding MgrB that inhibits PhoQ kinase activity resulting in a negative feedback loop. Using models of PhoPQ TCS we show that PhoP-P can be insensitive to overexpression of PhoPQ if MgrB is expressed in excess of PhoQ. The PhoPQ TCS steady state response to decreasing Mg2+ concentration displays two distinct phases of activation separated by a plateau. We propose roles for Mg2+ and MgrB in modulating PhoQ activity such that a model recreates the biphasic nature of steady state dose-response. We propose that Mg2+ binds to PhoQ and promotes the phosphatase conformation. Limitation of Mg2+ then drives a change in conformation of PhoQ to the kinase form. We also hypothesize that MgrB suppresses the rate of this conformation change and the autokinase activity of PhoQ. Next, we find approximate analytical solutions for PhoP-P at different ranges of Mg2+ concentration. In our models we find that strong MgrB-mediated suppression of rate constants and growth-dilution of proteins are important factors that shape the biphasic dose-response. Finally, we propose advantages gained by having such an overlaid feedback structure. Negative feedback limits activation at low but not growth limiting Mg2+ and shapes a surge in transcription in response to large step downs in Mg2+. Whereas positive feedback enables a strong activation of PhoP-P dependent promoters at growth-limiting Mg2+.

With a third component modulating the kinase’s activity, how does a PhoPQ TCS still obtain robustness to levels of the two components? Our analysis shows a possible condition in which PhoP-P can be robust to variations in PhoPQ expression. If MgrB is expressed at much higher levels compared to PhoQ, dependence of PhoP-P on total PhoPQ expression becomes negligible. This condition for robustness is not implausible within E. coli since PmgrB is one of the strongest PhoP-activated promoters [16] and is likely stronger than PphoPQ. PhoQ, like many TCS sensor kinases, is expressed at low concentrations, estimated 50 fold less than PhoP [21, 25]. In fact, estimates of MgrB and PhoQ concentrations at ∼ 0.5 mM Mg2+ can be obtained from the database published by Li et al [25]. In rich medium, concentrations of MgrB and PhoQ are around 1.5 μM and 0.2 μM respectively. The near 7 fold difference is unlikely to decrease at lower Mg2+ given estimated maximum fold activation of PmgrB is 60 [28], whereas fold activation of ∼20 for PphoPQ can be computed from YFP measurements reported by Salazar et al [16]. It is possible that over the range of induction rates (upto 4x wild type) MgrB remains in excess of PhoQ.

Multiple PhoP-P dependent promoters plateau over a range of 1 to 0.01 mM Mg2+ while remaining far from saturation [9], only to be stimulated strongly when Mg2+ becomes growth limiting (< 10−3 mM). How does PhoPQ output plateau at lower stimulus levels, but still maintain the ability to respond strongly when needed? Hypotheses of Mg2+ binding PhoQ at multiple sites with differing affinities have been made [9], however our analysis uncovers a potential mechanism with fewer assumptions. Consistent with our assumptions, studies in Salmonella strains have suggested that Mg2+ binding PhoQ increases its phosphatase activity. We propose a model in which Mg2+ directly binds a kinase-conformation of PhoQ and switches it to phosphatase-conformation. Our analysis shows that if MgrB strongly suppresses autophosphorylation, as well as the switch from phosphatase to kinase conformation, dilution due to growth remains the only way through which PhoQ-MgrB phosphatase complex can decrease. This can create a regime where both phosphorylation and dephosphorylation of PhoP are independent of the signal rate (switching from kinase to phosphatase).

Finally, what are the advantages of encoding a negative feedback to limit activation of an autoregulated two-component system? PhoPQ two-component system is widely conserved across bacterial species including pathogenic bacteria such as Yersinia pestis, Klebsiella pneumoniae and Salmonella typhimurium [10, 14, 1820]. PhoP-P regulons in these species also encode MgrB homologs that limit PhoQ activity [18]. Interestingly, mutation or otherwise inactivation of the mgrB gene was found to be the source of colistin resistance in Klebsiella pneumoniae [19]. Conserved structure of the network suggests that the structure provides some fitness advantages in Mg2+ limitation by controlling level of activation of PhoP-P regulon. In E. coli positive autoregulation of the PhoPQ TCS helps cells survive in growth-limiting Mg2+. On the other hand, negative feedback creates a transcription surge in response to a step down in Mg2+ concentration. Negative feedback also facilitates a faster response compared to a mutant strain expressing mgrB constitutively at levels such that steady state response of the two strains is comparable [16]. Other negative feedback designs can also provide some of the same benefits. Phosphate sensing PhoBR TCS in E. coli speeds response by encoding a negative feedback. In contrast with PhoPQ, PhoB-P does not upregulate a protein that suppresses kinase activity. Instead, PhoB-P represses the autoregulated phoBR promoter at high concentrations of PhoB-P [29]. This design can overcome the costs of positive autoregulation; however, this design does not create a transcription surge.

In Salmonella, benefits of a surge in transcription can be obtained independent of negative feedback through an MgrB-like protein post-translationally suppressing kinase activity [11, 26]. Models of the Salmonella PhoPQ TCS reveal how positive autoregulation and the phosphatase activity of PhoQ together create an initial surge and a later decrease in expression of genes in PhoP-P regulon. Interestingly, models are consistent with the observed loss of surge in transcription if phoPQ is expressed constitutively. In contrast, transcription surge is present with either constitutive or autoregulated phoPQ expression in E. coli [16]. The surge and subsequent decrease in transcription is lost in strains lacking mgrB, suggesting different mechanisms drive transcription surges in E. coli and Salmonella.

Post-translational negative feedback also helps maintain sensitivity of PhoQ over a wider range of stimulus levels. The E. coli PhoBR TCS does not show adaptation in response to a downshift in phosphate. The advantage of overlaid autorepression and positive autoregulation in PhoBR TCS is that it allows for selecting a stronger autoregulated promoter without sacrificing speed [29, 30], but limits maximum activation. For two TCSs that sense low level of two nutrients, what selection pressure could have led to evolution of these structurally similar but functionally different negative feedback loops remains unknown. Taken together, these findings show how interplay of positive and negative feedback can shape dynamical properties of the PhoPQ two-component system.

Using our models of PhoPQ TCS that can explain experimental observations, we can make some testable predictions. First, if the experiment measuring TCS output as a function of independent induction of phoPQ operon (Fig 1B) is conducted using a strain expressing mgrB constitutively, we predict that robustness should not be observed (S8 Fig). This lack of robustness of PhoP-P output to PhoPQ overexpression could become more apparent if mgrB is expressed at low levels. Second, with the same strain expressing mgrB constitutively, we find that oscillations are possible in the output when cells are switched from high to intermediate Mg2+, eg. 50 → 1mM (S3 Text). Oscillations are not predicted if the cells are switched to low Mg2+, i.e. 0.01mM or if mgrB is expressed at high levels (comparable to expression levels of wild-type cells at 0.01 mM Mg2+, S6 Fig). Moreover, we observe these oscillations with in silico mutants of wild-type models that show a biphasic dose-response. The predictions of oscillation are relatively robust and no oscillations are observed with models that fit temporal data well but fail to display biphasic dose-response. These predictions must be tested in the future.

Notably, the uncovered oscillation mechanism is quite generic. It requires transcriptionally autoregulated TCSs with sensory kinase in two conformations, one kinase-dominant another phosphatase dominant. If both kinase and phosphatase states of the sensor kinase (SK) are increased proportionally with the increase in total-SK, the steady state RR-P is independent of total-SK, as has been seen in multiple experimental and theoretical works [2224]. In other words, positive feedback (increase in kinase form of SK) exactly balances out a negative feedback (increase in phosphatase form). While the above argument may hold true about steady state RR-P, positive and negative feedback may have different timescales. If sensory kinase in produced in the kinase-dominant conformation and then slowly switches to phosphatase-dominant one, sustained or damped oscillations are possible. Most natural TCSs are autoregulated and often activated by a ligand that drives a conformational change in sensory kinase [31, 32]. Therefore this oscillatory or pulsatile response dynamics may be observed in the systems where it is of physiological benefit and could be used in synthetic biology applications.

Methods

Model and simulations

Two mathematical models were developed to examine the dynamical properties of PhoPQ TCS. The first model considers a single bifunctional form of the kinase PhoQ, whereas the second model considers two separate conformations (kinase and phosphatase). A set of ordinary differential equations (ODEs) describes the rate of change of all protein and mRNA species (S5 Text). The phosphorylation and dephosphorylation cycle reactions follow previous models by Goulian and collaborators [21]. Gene transcription regulation is modeled by phenomenological models of (Hill-function) dependence on [PhoP-P].

All models used (S5 Text) were simulated to follow experimental protocol as closely as possible. For time course, signal parameter (depending on model) was set to 1mM to compute an initial steady state vector of all state variables using ode15s in MATLAB. Using this as initial condition, signal was set at a pre stress value (50mM or 2mM) and integrated for 3.5 hrs. Then the signal was set to a post-stress value (0.01mM, 2mM or 10mM) and integrated for 2 hrs, at the same time points as the data. For steady state data, signal was set to the respective value and integrated to steady state.

Experimental data

Experimental data was obtained from refs [16, 21]. Time course of YFP:CFP read out from plates following a switch from 50mM to 0.01mM Mg2+ published in ref [16] was used to fine tune temporal parameters. YFP was either expressed from the PhoP-P dependent mgrB promoter or phoPQ promoter. Time course data for the following strains was used as constraint on parameters: wild-type (PmgrB, PphoPQ), mgrB deletion (PmgrB, PphoPQ), autoregulation deletion, autoregulation+mgrB double deletion. In addition, wild-type time-course data collected from PmgrB promoter for cells switched from 50mM to 10mM, 50mM to 2 mM and 2mM to 0.01 mM was also used. The value of YFP:CFP at t = 0 for wild type cells switched from 50mM to 0.01mM with YFP expressed from mgrB promoter was used to normalize all time-course data. Steady state YFP:CFP data with YFP expressed from PmgrB for a range of Mg2+ concentrations (30mM to 0.03mM) published in ref [21] was used to fine tune steady state parameters. This steady state data was normalized to YFP:CFP at 30mM. All experimental data used for fitting is shown in S3 Fig.

Error calculation

Time course.

If (ti, yi) is the experimental normalized YFP:CFP data for a given strain and (ti, yi) represents simulated normalized YFP:CFP, then the squared residual error for time course is calculated as

Similar residual errors for all strains are then added together to give a total time course residual error Et.

Steady state signal response.

Steady state simulated YFP:CFP at each signal level is normalized to the simulated value at 30mM and compared against the experimental value leading to the residual error

In addition, steady state YFP:CFP is simulated at very high signal (equivalent of 10−4mM). If this value is not > 6 × [YFP:CFP(0.03mM)], then an error penalty of 25 (comparable to the maximum squared residual at 0.03 mM) is added to Es.

Parameter fitting

Parameters were fit to minimize the above squared residual error (Es + Et) using particle swarm optimization in MATLAB. Each particle swarm optimization run resulted in one parameter set. The best fitting parameter sets were used for further analysis.

Supporting information

S1 Fig. Steady state simulations of one-state PhoQ model of PhoPQ TCS.

Steady state [PhoP-P] as a function of total PhoP, PhoQ at various levels (all concentrations in units of (μM). As increases, a range of total-PhoP,PhoQ appears where PhoP-P is robust (B) Each point in (A) is an intersection of transcription and interaction modules (Fig 2A, main text). Red curve shows solution to the interaction module. At fixed total PhoP,PhoQ, total-MgrB is increased and steady state [PhoP-P] is computed. Black curve represents the saturating dependence of MgrB-total on [PhoP-P]. The dotted line is the analytical solution obtained by solving Eqs 1 and 2 in main text.

https://doi.org/10.1371/journal.pcbi.1008130.s001

(PDF)

S2 Fig. Robustness in one-state PhoPQ model insensitive to modest parameter variations.

(A,B) Phenomenon of robustness to PhoPQ variation is observed in the one-state PhoPQ model over varying λ, KD values or over varying ratio of PhoP:PhoQ. (C) Variations in PhoP:PhoQ ratio also do not change the conclusions of biphasic steady-state response of the two-state model.

https://doi.org/10.1371/journal.pcbi.1008130.s002

(PDF)

S3 Fig. Experimental data used for parameter fitting.

YFP:CFP ratio (normalized to the ratio at 50mM) extracted from [16] and [21]. This normalized data set was used to fit temporal and steady state parameters for all models described in this paper. Data was extracted using image analysis in MATLAB (except bottom right panel, which was read out manually from ref [21]). All data except constitutive mgrB (top right panel) was used to fit models.

https://doi.org/10.1371/journal.pcbi.1008130.s003

(PDF)

S4 Fig. Best fit simulations of dynamical model 1.

Simulations from a representative parameter set showing best quantitative fit for the simple PhoPQ model. Simulation of an in-silico mutant expressing mgrB constitutively (top right, solid line) at 10x basal transcription rate of mgrB in wild-type. This simulation in addition to PhoQ phosphatase-lacking mutant was used to verify whether a parameter set was accurate.

https://doi.org/10.1371/journal.pcbi.1008130.s004

(PDF)

S5 Fig. Verifying accuracy of dynamical model 2 by simulating in-silico mutant of PhoQ lacking phosphatase activity.

With parameters that generate the fit in S6 Fig, we simulate the Mg2+ step-down with an in-silico mutant of PhoQ lacking phosphatase activity single mutant (light green, solid line) or double mutant with mgrB-deletion (dark green, solid line). These simulations show a qualitative match with the experimental data (dashed lines).

https://doi.org/10.1371/journal.pcbi.1008130.s005

(PDF)

S6 Fig. Best fit simulations of dynamical model 2.

Simulations from a representative parameter set showing best quantitative fit for the two-state PhoPQ model.

https://doi.org/10.1371/journal.pcbi.1008130.s006

(PDF)

S7 Fig. Biphasic dose-response of two-state model is not sensitive to ratio of maximum output to plateau output.

Simulations from a representative parameter set showing best quantitative fit for the two-state PhoPQ model with lower maximum output relative to plateau level.

https://doi.org/10.1371/journal.pcbi.1008130.s007

(PDF)

S8 Fig. Response of two-state model to overexpression of PhoPQ.

(A) Blue line shows simulated steady state expression from the PmgrB promoter at 1mM Mg2+ from an in silico mutant with PphoPQ promoter under inducible control (instead of autoregulated). PhoPQ TCS model also predicts that PhoP-P output will not be robust to overexpression of PhoP and PhoQ if mgrB is expressed constitutively instead of under PhoP-P control (red line). Promoter expression is shown as YFP:CFP normalized to steady state WT YFP:CFP ratio at the same Mg2+. The x-axis shows total [PhoP] from the in silico mutant simulation normalized to WT total [PhoP]. The axes are recreated from Fig 4C in [21], and blue triangles represent data from the same figure. (B) Over a larger range of total-PhoP, the two-state model also shows a range of PhoP expression in which PhoP-P does not vary significantly similar to one-state model.

https://doi.org/10.1371/journal.pcbi.1008130.s008

(PDF)

S1 Text. Analyzing PhoPQ-MgrB reaction network for absolute concentration robustness.

https://doi.org/10.1371/journal.pcbi.1008130.s009

(PDF)

S2 Text. Steady state PhoP-P for one-state PhoPQ-MgrB model.

https://doi.org/10.1371/journal.pcbi.1008130.s010

(PDF)

S3 Text. Model predictions and analysis of oscillations.

https://doi.org/10.1371/journal.pcbi.1008130.s011

(PDF)

S4 Text. A framework to examine steady state signal response for two-state model of PhoPQ-MgrB.

https://doi.org/10.1371/journal.pcbi.1008130.s012

(PDF)

S5 Text. PhoPQ TCS models: Reactions, ODEs and Parameters.

https://doi.org/10.1371/journal.pcbi.1008130.s013

(PDF)

References

  1. 1. Stock AM, Robinson VL, Goudreau PN. Two-component signal transduction. Annual review of biochemistry. 2000;69(1):183–215. pmid:10966457
  2. 2. Wuichet K, Cantwell BJ, Zhulin IB. Evolution and phyletic distribution of two-component signal transduction systems. Current opinion in microbiology. 2010;13(2):219–225. pmid:20133179
  3. 3. Daeffler KN, Galley JD, Sheth RU, Ortiz-Velez LC, Bibb CO, Shroyer NF, et al. Engineering bacterial thiosulfate and tetrathionate sensors for detecting gut inflammation. Mol Syst Biol. 2017;13(4):923. pmid:28373240
  4. 4. Landry BP, Palanki R, Dyulgyarov N, Hartsough LA, Tabor JJ. Phosphatase activity tunes two-component system sensor detection threshold. Nat Commun. 2018;9(1):1433. pmid:29650958
  5. 5. Schmidl SR, Sheth RU, Wu A, Tabor JJ. Refactoring and optimization of light-switchable Escherichia coli two-component systems. ACS Synth Biol. 2014;3(11):820–31. pmid:25250630
  6. 6. West AH, Stock AM. Histidine kinases and response regulator proteins in two-component signaling systems. Trends in Biochemical Sciences. 2001;26(6):369–376. pmid:11406410
  7. 7. Groisman EA. Feedback Control of Two-Component Regulatory Systems. Annu Rev Microbiol. 2016;70:103–24. pmid:27607549
  8. 8. Castelli ME, Garcia Vescovi E, Soncini FC. The phosphatase activity is the target for Mg2+ regulation of the sensor protein PhoQ in Salmonella. J Biol Chem. 2000;275(30):22948–54. pmid:10807931
  9. 9. Miyashiro T, Goulian M. Stimulus-dependent differential regulation in the Escherichia coli PhoQ PhoP system. Proc Natl Acad Sci U S A. 2007;104(41):16305–10. pmid:17909183
  10. 10. Prost LR, Miller SI. The Salmonellae PhoQ sensor: mechanisms of detection of phagosome signals. Cell Microbiol. 2008;10(3):576–82. pmid:18182085
  11. 11. Shin D, Lee EJ, Huang H, Groisman EA. A positive feedback loop promotes transcription surge that jump-starts Salmonella virulence circuit. Science. 2006;314(5805):1607–9. pmid:17158330
  12. 12. Yuan J, Jin F, Glatter T, Sourjik V. Osmosensing by the bacterial PhoQ/PhoP two-component system. Proc Natl Acad Sci U S A. 2017;114(50):E10792–E10798. pmid:29183977
  13. 13. Oyston PC, Dorrell N, Williams K, Li SR, Green M, Titball RW, et al. The response regulator PhoP is important for survival under conditions of macrophage-induced stress and virulence in Yersinia pestis. Infect Immun. 2000;68(6):3419–25. pmid:10816493
  14. 14. Miller SI, Kukral AM, Mekalanos JJ. A two-component regulatory system (phoP phoQ) controls Salmonella typhimurium virulence. Proc Natl Acad Sci U S A. 1989;86(13):5054–8. pmid:2544889
  15. 15. Groisman EA. The pleiotropic two-component regulatory system PhoP-PhoQ. Journal of bacteriology. 2001;183(6):1835–1842. pmid:11222580
  16. 16. Salazar ME, Podgornaia AI, Laub MT. The small membrane protein MgrB regulates PhoQ bifunctionality to control PhoP target gene expression dynamics. Mol Microbiol. 2016;102(3):430–445. pmid:27447896
  17. 17. Lippa AM, Goulian M. Feedback inhibition in the PhoQ/PhoP signaling system by a membrane peptide. PLoS Genet. 2009;5(12):e1000788. pmid:20041203
  18. 18. Perez JC, Shin D, Zwir I, Latifi T, Hadley TJ, Groisman EA. Evolution of a bacterial regulon controlling virulence and Mg(2+) homeostasis. PLoS Genet. 2009;5(3):e1000428. pmid:19300486
  19. 19. Poirel L, Jayol A, Bontron S, Villegas MV, Ozdamar M, Türkoglu S, et al. The mgrB gene as a key target for acquired resistance to colistin in Klebsiella pneumoniae. Journal of Antimicrobial Chemotherapy. 2015;70(1):75–80. pmid:25190723
  20. 20. Cannatelli A, Giani T, D’Andrea MM, Di Pilato V, Arena F, Conte V, et al. MgrB inactivation is a common mechanism of colistin resistance in KPC-producing Klebsiella pneumoniae of clinical origin. Antimicrobial agents and chemotherapy. 2014;58(10):5696–5703. pmid:25022583
  21. 21. Miyashiro T, Goulian M. High stimulus unmasks positive feedback in an autoregulated bacterial signaling circuit. Proc Natl Acad Sci U S A. 2008;105(45):17457–62. pmid:18987315
  22. 22. Batchelor E, Goulian M. Robustness and the cycle of phosphorylation and dephosphorylation in a two-component regulatory system. Proc Natl Acad Sci U S A. 2003;100(2):691–6. pmid:12522261
  23. 23. Shinar G, Milo R, Martinez MR, Alon U. Input output robustness in simple bacterial signaling systems. Proc Natl Acad Sci U S A. 2007;104(50):19931–5. pmid:18077424
  24. 24. Shinar G, Feinberg M. Structural sources of robustness in biochemical reaction networks. Science. 2010;327(5971):1389–91. pmid:20223989
  25. 25. Li GW, Burkhardt D, Gross C, Weissman JS. Quantifying absolute protein synthesis rates reveals principles underlying allocation of cellular resources. Cell. 2014;157(3):624–35. pmid:24766808
  26. 26. Yeo WS, Zwir I, Huang HV, Shin D, Kato A, Groisman EA. Intrinsic Negative Feedback Governs Activation Surge in Two-Component Regulatory Systems. Molecular Cell. 2012;45(3):409–421. pmid:22325356
  27. 27. Ray JC, Igoshin OA. Adaptable functionality of transcriptional feedback in bacterial two-component systems. PLoS Comput Biol. 2010;6(2):e1000676. pmid:20168997
  28. 28. Ram S, Goulian M. The architecture of a prototypical bacterial signaling circuit enables a single point mutation to confer novel network properties. PLoS Genet. 2013;9(8):e1003706. pmid:23990799
  29. 29. Gao R, Stock AM. Overcoming the Cost of Positive Autoregulation by Accelerating the Response with a Coupled Negative Feedback. Cell Rep. 2018;24(11):3061–3071 e6. pmid:30208328
  30. 30. Hermsen R, Erickson DW, Hwa T. Speed, sensitivity, and bistability in auto-activating signaling circuits. PLoS Comput Biol. 2011;7(11):e1002265. pmid:22125482
  31. 31. Liu Y, Rose J, Huang S, Hu Y, Wu Q, Wang D, et al. A pH-gated conformational switch regulates the phosphatase activity of bifunctional HisKA-family histidine kinases. Nature communications. 2017;8(1):1–10. pmid:29235472
  32. 32. Zschiedrich CP, Keidel V, Szurmant H. Molecular mechanisms of two-component signal transduction. Journal of molecular biology. 2016;428(19):3752–3775. pmid:27519796