Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Impacts of Population Structure and Analytical Models in Genome-Wide Association Studies of Complex Traits in Forest Trees: A Case Study in Eucalyptus globulus

  • Eduardo P. Cappa ,

    Contributed equally to this work with: Eduardo P. Cappa, Yousry A. El-Kassaby

    ecappa@cnia.inta.gov.ar

    Affiliation Instituto de Recursos Biológicos, Centro de Investigación en Recursos Naturales, Instituto Nacional de Tecnología Agropecuaria (INTA) and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Hurlingham, Buenos Aires, Argentina

  • Yousry A. El-Kassaby ,

    Contributed equally to this work with: Eduardo P. Cappa, Yousry A. El-Kassaby

    Affiliation Department of Forest and Conservation Sciences, Faculty of Forestry, The University of British Columbia, Vancouver, British Columbia, Canada

  • Martín N. Garcia,

    Affiliation Instituto de Biotecnología, Centro de Investigación en Ciencias Veterinarias y Agronómicas, Instituto Nacional de Tecnología Agropecuaria (INTA), Hurlingham, Buenos Aires, Argentina

  • Cintia Acuña,

    Affiliation Instituto de Biotecnología, Centro de Investigación en Ciencias Veterinarias y Agronómicas, Instituto Nacional de Tecnología Agropecuaria (INTA), Hurlingham, Buenos Aires, Argentina

  • Nuno M. G. Borralho,

    Affiliation Private Consultant, Cartaxo, Portugal and Centro de Estudos Florestais, Instituto Superior de Agronomia, Universidade Técnica de Lisboa, Lisboa, Portugal

  • Dario Grattapaglia,

    Affiliation EMBRAPA Genetic Resources and Biotechnology and Genomic Sciences Program, Universidade Católica de Brasília, Brasilia DF, Brazil

  • Susana N. Marcucci Poltri

    Affiliation Instituto de Biotecnología, Centro de Investigación en Ciencias Veterinarias y Agronómicas, Instituto Nacional de Tecnología Agropecuaria (INTA), Hurlingham, Buenos Aires, Argentina

Abstract

The promise of association genetics to identify genes or genomic regions controlling complex traits has generated a flurry of interest. Such phenotype-genotype associations could be useful to accelerate tree breeding cycles, increase precision and selection intensity for late expressing, low heritability traits. However, the prospects of association genetics in highly heterozygous undomesticated forest trees can be severely impacted by the presence of cryptic population and pedigree structure. To investigate how to better account for this, we compared the GLM and five combinations of the Unified Mixed Model (UMM) on data of a low-density genome-wide association study for growth and wood property traits carried out in a Eucalyptus globulus population (n = 303) with 7,680 Diversity Array Technology (DArT) markers. Model comparisons were based on the degree of deviation from the uniform distribution and estimates of the mean square differences between the observed and expected p-values of all significant marker-trait associations detected. Our analysis revealed the presence of population and family structure. There was not a single best model for all traits. Striking differences in detection power and accuracy were observed among the different models especially when population structure was not accounted for. The UMM method was the best and produced superior results when compared to GLM for all traits. Following stringent correction for false discoveries, 18 marker-trait associations were detected, 16 for tree diameter growth and two for lignin monomer composition (S∶G ratio), a key wood property trait. The two DArT markers associated with S∶G ratio on chromosome 10, physically map within 1 Mbp of the ferulate 5-hydroxylase (F5H) gene, providing a putative independent validation of this marker-trait association. This study details the merit of collectively integrate population structure and relatedness in association analyses in undomesticated, highly heterozygous forest trees, and provides additional insights into the nature of complex quantitative traits in Eucalyptus.

Introduction

Understanding genotype-phenotype relationships and discovering genes or genomic segments with roles in the control of complex traits are challenges of major biological and economic importance. Deciphering this connection is considered to be geneticists' ultimate goal to determine the genetic underpinnings of biological processes while enhancing directional selection strategies in improvement programs. The combined advances in molecular markers development, functional genomics, and analytical methods, made it possible to gain insights into the architecture of complex traits by identifying underlying genes and genomic segments involved in their control (i.e., number, magnitude, and their possible interaction) [1]. The once elusive promise of effectiveness of molecular markers in population improvement is gradually becoming a reality for model and non-model species including forest trees. Neale and Savolainen [2] presented a compelling argument supporting the feasibility to dissect complex traits in forest trees as well as pointing to some of tree breeding perceived drawbacks, such as long generation span, substantial resources dependency, and the size required for proper testing across a vast geographic representation. Most economically important tree species are still largely undomesticated, having predominantly an outcrossing mating system and very large natural populations. This is expected to result in high nucleotide diversity and low linkage disequilibrium [3], [4], thus making them suitable candidates for association genetics or linkage disequilibrium mapping [2].

However, in such wild populations genetic structure, such as the presence of provenance or racial effects and/or intra-racial spatial relatedness between trees may affect association genetics results [5], [6]. Overlooking these structures in the data has been considered as one of the main causes of spurious associations (i.e., false positives) [7]. To overcome such drawbacks, several methods have been developed and successfully implemented [8], [9], [10]. Among the many solutions to account for genetic structure, the ‘Unified Mixed-Model’ (UMM) [11] offered a simple method whereby both sub-populations (i.e., races or provenances) and cryptic kinship structures can be accounted for in association genetics analyses. In summary, population and kinship structures are quantified using a model-based Bayesian clustering algorithm (STRUCTURE; [12]) and one of the pair-wise kinship estimation procedures (e.g., [13], [14]) are then included in the UMM model as fixed or random effects, respectively [11]. Yu et al. [11] demonstrated the value of accounting for population and/or family structures through the incorporation of genomic control and marker-based kinship in mixed model association testing using two samples: a family sample of 14 human families and a sample of 277 diverse maize inbred lines. From that initial work, effects of population and family structure on associations has been investigated in several agricultural crops such as Glycine max [15], Hordeum vulgare [16], Brassica rapa [17], Triticum aestivum [18], [19] to name a few.

To date, a number of association genetics studies have been reported for forest trees using either structured or unstructured populations. Various analytical methods have been applied to detect associations, including classical general linear model (GLM) with and without family structure [20], [21], UMM [22], [23], [24], [25], [26], [27], [28], [29], [30], [31], and quantitative transmission test for linkage disequilibrium (QTDT) [32]. In the absence of population and/or family structures, the inclusion of the Q (population structure) and/or K (family structure) matrices in the UMM is expected to unnecessarily remove parts from the error term's variation and degrees of freedom to the population and/or family effects. This results in changes in the mean square error term which ultimately affects the statistical power of the association tests.

Due to the lack of accessible genome-wide genotyping systems and given the generally low extent of linkage disequilibrium in forest trees, all these association studies were carried out based on the targeted analysis of polymorphisms in candidate genes. Only more recently genome-wide genotyping approaches have been applied in Pinus taeda [28] and Pinus contorta [33] for association mapping, and in whole-genome prediction studies in Pinus taeda [34], and Eucalyptus [35]. While candidate gene association studies are severely biased by the a priori choice of genes that are allegedly involved in trait control, genome-wide studies are unbiased in this respect, and therefore tend to better converge to the true genetic architecture of the complex traits investigated.

Recently, a high throughput Diversity Array Technology (DArT) marker platform was developed for species of Eucalyptus [36]. Briefly, DArT is a genotyping technique based on genome complexity reduction, followed by hybridization to spotted probe microarrays that offer a rapid, cost-effective and efficient methodology for high-throughput genome-wide marker analysis [37]. The operational array with 7,680 selected polymorphic DArT markers is highly transferable across Eucalyptus species [38], [39], and has provided unprecedented level of resolution for linkage mapping [40], [41], [42], QTL analysis [43], [44] and Genomic Selection [35]. Interestingly, a detailed genomic characterization of these DArT markers aligned to the annotated Eucalyptus grandis reference genome, showed that they preferentially target the gene space with 77% of them positioned at <1 kbp from the nearest gene model. Moreover, they display a largely homogeneous distribution across the genome, thereby providing gene-targeted genotyping and good coverage for genome-wide applications in association genetics and Genomic Selection (GS) [42]. Given these very special attributes, the DArT array offers a useful platform for association genetic testing across the genome, although the number of markers assayed (7,680) is still less than optimal for a more powerful full fledged genome-wide association study.

As part of the Biotech MERCOSUR project [45] 303 individuals from different open-pollinated progeny trials of Eucalyptus globulus core and intergrade populations were genotyped with the 7,680 DArT marker array. In the present study, our main objectives were: (1) to test the efficacy of including the Q and/or K matrices in the association genetics analyses for complex traits for growth and wood properties and (2) to evaluate and compare the efficacy of different association mapping models to avoid declaring false marker-trait associations based on the degree of deviation between the observed and expected p-values of marker-trait associations. Additionally, despite of the relatively limited size association mapping population we had access to, our study also contributes to the understanding of the genetic architecture of economically important traits in Eucalyptus globulus.

Materials and Methods

Ethics statement

The Eucalyptus globulus Argentinian trial belongs to the Instituto Nacional de Tecnología Agropecuaria (INTA) and no specific permits were required to carry out the study. The three Eucalyptus globulus Uruguayan trials belong to Mundial Forestación. All the available data from these three trials were provided by the company director Rogerio de Aguiar de Moraes under the agreement of the Biotech MERCOSUR project. Eucalyptus globulus is an exotic tree species in Argentina and Uruguay and is not protected or endangered.

Plant material, phenotypic traits, and genotyping

A sample of 303 Eucalyptus globulus (Labill.) individuals growing at four separate trial sites was used in this study (Table 1). One trial was located in Argentina: Balcarce, Buenos Aires province (37° 45′ S, 58° 17′ W) (134 trees), and the other three in Uruguay (33° 51′ S, 55° 34′ W) (in total 169 trees). The mapping population included trees from 161 families belonging to seven native races in Australia, and two bulk collections from local landraces originated in Portugal and Chile. All seeds were open-pollinated, except two control-pollinated full-sib seedlots from the Portuguese land race, in the Argentinian trial. The number of sampled trees per family varied between 1 and 9. Eighteen families from four Australian races planted in the Argentinian trial were also present in the two Uruguayan trials.

thumbnail
Table 1. Description of progeny trials in the different sites, numbers of individuals phenotyped and genotyped and phenotypic trait means (see text for traits' abbreviations).

https://doi.org/10.1371/journal.pone.0081267.t001

Several growth and wood properties traits were measured at the four sites (see Lopez et al. [46] for details). However, measurements for every trait were not taken in all sites. However, diameter at breast height (DBH), Pilodyn penetration (an indirect measure of wood specific gravity), Klason and total lignin, lignin monomer composition (Syringyl∶Guaiacyl S∶G ratio), and extractives in ethanol (Extractives) were measured in all sites and used in this study. Diameter at breast height (1.3 m from the ground) was measured in centimetres when trees were 4 (Argentina) and 6 (Uruguay) years old on all surviving trees. Pilodyn penetration (PILO) was measured in mm using a 6 J Forest Pilodyn with a 2 mm diameter pin, in an east to west direction and without bark (a small section of bark at 1.3 m above the ground was removed prior to the PILO readings being taken), when trees were 4 (Argentina) and 6 (Uruguay) years old on all surviving trees. Wood chemical components were estimated using Near-Infrared (NIR) spectroscopy. Briefly, for wood chemical traits, cambium to cambium wood cores were removed at breast height from each tree in May 2010 (Argentina; 15-year-old) and in October 2008 (Uruguay; 8-year-old) and air-dried (Argentina' samples) or oven-dried (Uruguay' samples). The wood samples were ground to pass through a 1-mm screen, and NIR spectra were obtained by diffuse reflectance using a Bruker Optics Co. Multi Purpose Analyzer (MPA). Partial least squares regression (PLSR) was used for the evaluation of the NIR spectra (NIR-PLSR models) and for the calculation of the prediction models. Validation of these predictions was undertaken using conventional chemical assays from 15–22 independent samples from those used to develop the model. All models obtained were adequate for screening trees in breeding programs with a residual prediction deviation (RPD; [47]) above 2.3 (e.g., [48]). The RPD obtained for the E. globulus samples were 3.9, 3.8, 3.8 and 2.3 for Klason and Total lignin, S∶G ratio and Extractives, respectively.

DArT genotyping of all 303 individuals was carried out by Diversity Arrays Technology Pty Ltd (DArT P/L, Canberra, Australia) as described previously [36]. DArT dominant marker data were used to assess population structure, estimate pair-wise kinship coefficients and linkage disequilibrium, and perform association genetics analyses.

Data analyses

A subset of 2,364 DArT markers was selected for the analysis based on quality parameters out of the 7,680 included on the genotyping array. The selected DArT markers had Call Rate (percentage of samples that could be scored as ‘0’ or ‘1’) greater than 80%, Reproducibility (reproducibility of scoring between replicated samples) greater than 97% and were polymorphic with frequencies of samples scored as ‘0’ or ‘1’ ranging between 0.95 and 0.05. Level of polymorphism for each marker was calculated by the expected heterozigosity: He =  where Pi is the frequency of the ith allele at the DArT marker locus. Because DArT markers are dominant, the allele frequencies were estimated making the frequency of ‘0’ genotypes equivalent to Pi2, assuming Hardy-Weinberg Equilibrium.

Genotypic data for a subset of 400 randomly taken DArT markers from the total of 2,364, were used to determine both population structure and pair-wise kinship coefficients among the 303 individuals, using the model-based Bayesian clustering algorithm implemented by STRUCTURE [12] and the kinship procedure of Hardy [13] using the software package SPAGeDi [49], respectively. STRUCTURE analyses were performed assuming an admixture model with default settings (i.e., no informative priors were used). STRUCTURE was run from 1 to 12 inferred clusters (K) with 10 independent runs for each K, each run starting with a burn-in period of 50,000 steps followed by 100,000 Markov Chain Monte Carlo iterations. The most probable value of K was selected according to the ΔK method [50]. Negative kinship values were set to zero following Yu et al. [11]. Pair-wise linkage disequilibrium (LD) between individual DArT markers was calculated by the square allele frequency correlation coefficient (r2) implemented in the program TASSEL version 3.0.137 [51] and their statistical significance was computed by 1,000 permutations using the two-sided Fisher's Exact test [52]. Mean r2 values were calculated separately for unlinked loci and for loci on the same chromosome. The 95th percentile of the square root transforming of r2 distribution was taken as a population-specific critical value of r2 [53], beyond which LD was likely to be caused by genetic linkage.

The association mapping tests were carried out using two steps. In the first, data were standardized within each site and trait by subtracting each individual measurement from the mean trait value at that site and dividing the adjusted measurement by the site's standard deviation. The effect of large-scale environmental variation within each site was removed by exporting residuals from an analysis where replicate and incomplete block (for the Argentinian trial) was included as fixed or random effects, respectively. In the second step, these residuals were used as adjusted phenotype and single-marker associations were determined using the Unified Mixed-Model [11]:(Eq. 1)where y, α, v, u, and e are vectors of adjusted phenotypic observations, DArT effects (fixed), population effects (fixed), kinship effects (random), and residual effects, respectively, and S, Q, Z are incidence matrices relating y to α, v, and u, respectively. Several models were tested including GLM without population and family structures (GLM), and UMM with different combinations of population and family structures (Q, K, Q+K). Additionally, as recommended by Price et al. [54], the computationally demanding Q matrix was substituted by the principal coordinate's analysis' (PCA) P matrix resulting in two additional models (P and P+K). We removed the last column of the Q matrix to eliminate linear dependence between columns; however, all the columns (i.e., axes) were used in the P matrix to represent the population structure because it does not result in linear dependency. All analyses were conducted using TASSEL version 3.0.137 [51] and positive association were determined at the nominal p<0.05 level, and were further corrected for multiple testing using the false discovery rate (FDR) method for multiple comparisons [55] with p<0.05. The FDR thresholds were calculated using the QVALUE package [56] implemented in R (http://www.r-project.org/).

Model comparisons were based on the degree of deviation from uniform distribution and estimates of the mean square differences (MSD) between the observed and expected p-values of all DArT markers following the method described in Stich et al. [18]. A high MSD value indicates a strong deviation from a uniform distribution of p-values, suggesting that the type I error of the tested model could be substantially higher than the nominal α-level [18].

Pearson correlations were also calculated between the residuals from the measured traits using the CORR procedure in SAS [57]. Correlation between DBH and the wood chemical traits were very low (either positive or negative; i.e., from −0.06 to 0.03) and not significantly different from zero (p>0.27). However, wood chemical traits were highly inter-correlated (either positive or negative; i.e., from −0.43 to 0.96) and significantly different from zero (p<0.05), while PILO was only weakly positive correlated with DBH (0.16 p = 0. 05).

Based on the sequence information of the trait-associated DArT markers the following analyses were carried. Firstly, a sequence BLASTN search (E-value≤1e−3) against the Eucalyptus grandis genome database (version 1.1 available in Phytozome 6.0, http://www.phytozome.net/eucalyptus.php), was carried out. To assess the putative identities of these DArT markers, BLASTX searches were performed against the GenBank non-redundant protein database (http://blast.ncbi.nlm.nih.gov/Blast.cgi) with an E-value cut-off≤1e-10. Annotation and mapping routines were run with Blast2GO [58], using functional annotations and assigning gene ontology terms (GO terms) ([59]; http://www.geneontology.org/), and an enzyme classification number (EC number). Secondly, the Geneious pro 6.0.3 software (Biomatters http://www.geneious.com/) was used to assemble redundant DArT marker probe sequences, using the default parameter of 80% identity in a word length of 14 nucleotides. Thirdly, the genomic position the DArT marker probes as determined by aligning their sequences to the Eucalyptus grandis reference genome (version 1.1) [42], was used to scrutinize the gene content of the genomic window flanking the lignin S∶G ratio associated DArT marker using the Gbrowse tool of the Eucalyptus grandis genome version 1.1 available in Phytozome, (http://www.phytozome.net/eucalyptus.php).

Results and Discussion

DArT marker genotyping

DArT genotyping produced 2,364 high quality dominant markers with He values ranging from 0.04 to 0.50 (the maximum value for a bi-allelic marker), with an average of 0.33 and most of them having He values greater than 0.40 (Figure S1). Based on the Eucalyptus reference map [40], 1,909 of the 2,364 DArT markers had a known map location indicating that a reasonable genome-wide coverage from the recombination standpoint was provided by these markers (Figure 1). These 2,364 also provided, on average, a genome-wide physical genotyping density of one marker every ∼260 kbp or ∼0.5 cM based on recent genome-wide estimates of the relationship between physical distance and recombination frequency in the Eucalyptus genome [42]. An average of 174 markers per linkage group were assayed (1 marker/0.58 cM), with a minimum of 95 markers in linkage group 4 (1 marker/0.85 cM) and a maximum of 246 in linkage group 5 (1 marker/0.39 cM).

thumbnail
Figure 1. Reference genetic map position of 1,909 DArT markers assayed in the association study.

Map position from Hudson et al. (2012).

https://doi.org/10.1371/journal.pone.0081267.g001

In the selected sample of 303 trees, pair-wise r2 estimates among the 1,909 DArT markers with known map position [40] varied from 0 to 1 with a mean of 0.09. The 95th percentile of the distribution of unlinked r2 pairs was estimated at 0.025. However, the extent of LD within the different linkage group appeared variable. Mean pair-wise estimates of r2 across all the genome (i.e., intra- and inter-chromosomal) varied from 0.012 to 0.032. The number of pair-wise estimates r2 above the baseline 0.025 varied from 3.63% to 9.23%. However, a second-degree loess curve that fitted the r2 estimates did not reach the 95th percentile baseline for any linkage group (Figure S2), indicating that the marker data obtained, although genome-wide, was not dense enough to detect consistent LD. This was expected, confirming that overall (i.e., using the intra- and inter-chromosomal and significant and non-significant r2 marker pairs) LD decays rapidly below a centimorgan, a recombination fraction found to correspond, on average, to 513 kbp [42]. The very few studies conducted in Eucalyptus species at the single gene level showed that LD decays rapidly within a few hundred base pairs [21], [60], [61], corroborating, as expected, that a higher marker density would be required to carry out a bona fide LD based genome-wide association study (GWAS).

Population structure

The genetic structure obtained by STRUCTURE and PCA was similar (Figure 2). The first two principal components explained 24.84% (PC1) and 20.78% (PC2) of the variation in estimated genotypic state probabilities across the 400 DArT markers. The STRUCTURE analysis revealed three subpopulations, henceforth denoted as genetic groups (Figure 2A), which coincided with the broad geographical origin (i.e., races) in Australia [62]. Of the 303 trees, only four had membership probabilities set below 0.6 and had to be assigned to more than one genetic group. Genetic group 1 included 93 trees (31%), belonging to Eastern and Western Otways races (in Victoria, Australia), and to the Chilean provenance in the Uruguayan trials. Genetic group 2 included 109 trees (36%) belonging to the Jeeralangs (i.e., Strzelecki Ranges race in Victoria, Australia) and the E. globulus spp. pseudoglobulus (Naudin ex Maiden). Genetic group 3 included 101 trees (33%) belonging to the Furneaux Group of Islands, and North-Eastern and South-Eastern Tasmanian races, the Chilean provenance in the Argentinian trial and the Portuguese land race. This clear racial genetic grouping is in line with the results reported in similar native population studies of E. globulus using microsatellite markers [63], [64]. They also coincide with Freeman et al. [65], in assigning the Portuguese land race to a Tasmanian origin. It is interesting to note however, that in the present study Jeeralang families were clustered together with E. globulus spp. pseudoglobulus, whereas in Jones et al. [63], they were considered intergrades which were more closely related with Victorian E. globulus spp. globulus (such as Otways) and E. globulus spp. bicostata, than to E. globulus spp. pseudoglobulus. The resulting patterns from the STRUCTURE program suggest that the inclusion of the Q or P matrices in the analyses is expected to affect the association test's statistical power (see below). In spite of the unambiguous clustering, consistent with the geographically and taxonomically distinct subpopulations, the overall FST value was only 0.095±0.01 indicating a moderate genetic differentiation between the three E. globulus genetic groups. The estimate is similar to Steane et al. [64] with 0.090±0.02, across an even wider range of core E. globulus and integrated races.

thumbnail
Figure 2. Results of population structure analyses using a Bayesian approach implemented by STRUCTURE (A) and PCA (Principal coordinate analysis) (B).

Colors define three Genetic Group: Group 1 in blue (Eastern and Western Otways races and the Chilean provenance of the Uruguayan trials), Group 2 in red (Strzelecki Ranges race and E. globulus spp. pseudoglobulus (Naudin ex Maiden), and Group 3 in yellow (Furneaux, North-eastern and South-eastern Tasmania races, Chilean provenance of the Argentinean trial and Portuguese land race provenances).

https://doi.org/10.1371/journal.pone.0081267.g002

At the phenotypic level, visual inspection of the box plots based on the residual trait values in each of the three subgroups defined by STRUCTURE (Figure S3), and the p-values for differences of the least square means (Table S1) showed significant differences between some groups in all traits studied, except Extractives. Victorian races (Genetic Group 1 and 2) had superior DBH, but also higher Klason and total lignin and Extractive content, compared with Tasmanian races (Genetic Group 3), hence indicating better growth but poorer pulp quality attributes. As expected, the Jeeralang and E. globulus spp. pseudoglobulus material (Genetic Group 2) had the highest density (lowest Pilodyn) of the three [46], [62].

Family structure

The pair-wise relatedness among the 303 trees resulted in the identification of an array of variable relationships (Figure 3), indicating the presence of a within population familial structure, and providing justification to include the K matrix in the association genetics analyses. We knew a priori that some of the trees were related, because they belonged to the same open-pollinated family, the average relationship coefficient for these trees was 0.232 (closest to the pedigree expected value of 0.25), whereas the average for the unrelated pairs of trees was 0.032 (closest to the expected pedigree value of zero). Mean relationship within genetic groups was 0.076, 0.069 and 0.083 for genetic groups 1, 2, and 3, respectively. As expected, the relationship among trees from the same genetic group was greater than those from different genetic groups. This was particularly true between groups 2 and 3 (0.011). The most frequent class of genetic relationship was for values between 0.00 – 0.05 (75.6%), followed by values between 0.05 – 0.10 (12.7%) (Figure S4). Given that the family structure is truly present, then correlation between pair-wise relatedness and pair-wise geographic distance should be negative and significant. In fact, negative and highly significant Mantel correlation was observed for the DArT markers (−0.49, P<0.0001), confirming the presence of isolation-by-distance as the probable cause of the family structure found and once again justifying the inclusion of the K matrix in the association genetics analyses.

thumbnail
Figure 3. Heat map of the pair-wise relationship coefficients among the 303 E. globulus trees produced from the SPAGeDi program showing the three Genetic Groups: Genetic Group 1, 2 and 3 from right to left.

The heat scale represents pair-wise relationship coefficients for all pairs of individual trees. Values greater than 0.5 are not shown and account for only 0.08% of the distribution.

https://doi.org/10.1371/journal.pone.0081267.g003

Association genetics models comparison

Results from association analyses clearly indicated that there was no universal/single model that suited all the studied traits (Table 2, Figure 4). Overall, the GLM did not perform well. The mean square difference (MSD) between observed and expected p-values was highest for the GLM model (Table 2) and the distribution for MSD was substantially deviated from uniformity (Figure 4). It is noteworthy to note the drastic difference when population structure was included as a source of variation in the model. Irrespective of which population structure matrix was used (Q or P), the models that included a population structure performed consistently better than those that did not for all traits (Table 2, Figure 4); this was expected given the geographical structure among the E. globulus population being studied. The MSD of the Q model (and P model) ranged from 0.000469 (0.000069) for Extractives to 0.006154 (0.001328) for PILO, and was considerably lower than the value found for the GLM model (Table 2). Additionally, the curves in Figure 4 show that accounting for population structure (P or Q) dramatically increases the statistical power. Moreover, the GLM model produced a number of apparent false positive or spurious associations across all traits (Figure 4). As a result, using the Q or P matrix resulted in a considerable reduction in the number of significant marker-trait associations before multiple testing corrections were applied (p<0.05; see Figure 5 for a comparison between the simplest model (GLM) and both, the Q or P models). The importance of accounting for structure in the analysis was recently demonstrated in E. globulus [66]. In that study, Külheim et al. [66] detected hundreds of false-positive associations demonstrating the pitfall associated with ignoring geographical origin.

thumbnail
Figure 4. Plots of the observed vs. expected p-values for the six association genetics models studied for all traits.

See text for models' and traits' abbreviation.

https://doi.org/10.1371/journal.pone.0081267.g004

thumbnail
Figure 5. Association mapping results from the different linear models indicating the number of significant (p-value≤0.05) DArT markers associated with growth and wood properties traits.

In each bar, the gray and black areas represent the number of significant DArT markers from the specific model (i.e., GLM, Q, P, K, Q+K and P+K) and overlapping between the specific model and GLM, respectively. See text for models' and traits' abbreviation.

https://doi.org/10.1371/journal.pone.0081267.g005

thumbnail
Table 2. Mean squared differences (MSD) between observed and expected p-values for the six association genetics models applied in the study.

https://doi.org/10.1371/journal.pone.0081267.t002

In the present study, we have incorporated the kinship relationship among trees. Accounting for family structure is expected to remove most of the variance associated with close relatedness that would not have been explained by the Q or P matrices [16]. In our study, the inclusion of the K matrix in the model appeared to be trait dependent. Although 76% of pair-wise relationship estimates were close to 0, for DBH and PILO the K model outperformed the Q or P models, i.e. produced smaller MSD values (Table 2) and showed a similar expected distribution of p-values (Figure 4), whereas the opposite was true for the wood chemical traits (S∶G ratio, Klason lignin, Total lignin, and Extractives). Furthermore, the K model produced a more stringent reduction in the number of significant markers (p<0.05) with respect to the Q and P models (from 1.18% to 6.98%) in the six traits tested (Figure 5). This finding suggests that, when there are complex interrelationships among trees, both within and among subpopulations, fitting a Q (or P) model may not be adequate to reduce the number of spurious associations. Such results highlight the importance of accounting for the various sources of variation due to structure in the model (i.e., Q and/or K matrices). Yu et al. [11] presented a compelling scenario where, in some cases, population structure was not needed as family structure was adequate to capture the underlying structure in the data (e.g., ear height). Generally, family structure captures substantial amounts of variation caused by population structure and population structure inclusion would be only necessary in cases where obvious regional differences exist.

As expected, the complete Q+K [11] and P+K [54] models were equivalent, i.e. the MSD values between observed and expected p-values were similar and have similar MSD distributions (Figure 4). Furthermore, both models (i.e., Q+K and P+K) yielded similar reduction of number of significant (p<0.05) marker-trait associations for all studied traits (Figure 5). These findings demonstrate that association mapping models based on the two population structure matrices Q and P would be equally appropriate, when the K matrix is included. This indicates that it may be possible to replace the computationally intensive STRUCTURE algorithm with a simple PCA, an important result when large number of markers and large population sizes are included in the UMM, an increasingly common situation as much higher throughput sequencing-based SNP genotyping systems are becoming accessible for forest trees [67], [68], [69]. Similar conclusions have been reached by Zhao et al. [70] in soft winter wheat (Triticum aestivum L.) and by Stich et al. [18] in Arabidopsis thaliana.

Based on the MSD values (Table 2), the distribution of the expected and observed p-values (Figure 4), and the number of significant marker-trait associations (Figure 5), the best models by trait combinations used for comparing association results were as follows: P+K model for DBH, Q+K model for PILO, and P model for all other wood chemical traits (S∶G ratio, Klason lignin, Total lignin, and Extractives).

DArT marker-trait associations

A total of 14,184 association tests were performed (2,364 DArT markers versus six traits). This resulted in 962 positive associations before multiple testing corrections at the significance level of p<0.05. Using 1,000 permutations in an F-statistic test for correcting the rate of false discoveries, the number of positive single marker-trait associations was reduced to 18 (16 for DBH and 2 for S∶G ratio; Table 3). These results could apparently suggest that wood specific gravity (PILO) and possibly the other chemical properties of wood (S∶G ratio, Klason lignin, Total lignin, and Extractives) may involve fewer genes, resulting in a lower number of DArT markers associations, at least compared with growth (DBH), which is expected to be a more complex trait influenced by many genes. In fact, chemical wood properties often involve a single biosynthetic pathway and consequently one could expect a lower number of marker-trait associations when compared to complex traits such as growth or wood density that are affected by many different physiological processes. However, this is not what has been emerged in more recent and better powered biparental QTL studies in Eucalyptus. For example, Gion et al. [71] detected similar number of QTLs for growth and wood chemical traits in E. urophylla and E. grandis. Freeman et al. [44] identified a lower number of QTLs for DBH (11) than for wood chemical traits (average 14.2 QTLs/trait). Moreover, in Resende et al. [35], the number of markers with largest effect that maximized the proportion of heritability captured by Genomic Selection for pulp yield was essentially the same (∼200) as the number that did so for height growth. These results suggest that for any given experimental population size and genetic background there are other issues determining the likelihood of QTL detection such as the extent of phenotypic variance and the heritability of the trait.

thumbnail
Table 3. Association mapping results from the different linear models indicating the number (and percentage) of significant markers found associated with growth and wood property traits after correction for multiple testing (FDR p-value≤0.05).

https://doi.org/10.1371/journal.pone.0081267.t003

The amount of phenotypic variation explained by each marker (R2) in the selected models was always modest, accounting for 4.02% to 13.76% (only three of them had major effects above 10%, Table 4), with an average of 7.27% for DBH and 5.64 for S∶G ratio. These small R2 values are consistent with the genetic architecture of complex traits expected to be influenced by many loci, each with a relatively small effects (i.e., Fisher's 1918 infinitesimal model). Recent studies in Eucalyptus have reported low numbers of QTLs for growth and wood quality traits, whose effects rarely accounted for more than 5% of the observed variance [43], [44], [71], [72], [73], [74], [75]. In E. globulus, Bundock et al. [72] detected six QTLs for diameter (DBH) and height and two for PILO explaining between 7.2% and 10.1% of the phenotypic variation. Freeman et al. [73] identified 11 QTLs for growth and wood properties traits, with each QTL explaining between 3.8% and 12.3% of the phenotypic variation. In E. nitens, Thumma et al. [75] found 36 QTLs for Klason and total lignin, extractives and density amongst other wood traits, with R2 varying from 2.8% to 7.3% and averaging 5%. Gion et al. [71] detected 117 QTLs for a number of wood properties (including chemical, technological, physical, mechanical and anatomical) and growth traits in an interspecific cross between E. urophylla and E. grandis. In conclusion, most QTLs had effects below 5% and only 13 of them had effects above 15%. However, for growth traits the R2 values varied from 4.1% to 42.2% and from 5.0% to 37.0% for wood traits. In four-year-old progenies of two interspecific backcross families of E. urophylla and E. grandis, Kullan et al. [43] detected 5 QTLs for DBH and 12 for wood basic density. In this case, the R2 varied from 4.6% to 8.0% averaging 5.9% for DBH, and from 3.1% to 12.2% averaging 5.9% for wood density.

thumbnail
Table 4. Significant DArT marker-trait associations for DBH and S∶G ratio retained for the six models.

https://doi.org/10.1371/journal.pone.0081267.t004

As expected, we did not find any overlap between the associations found for DBH and S∶G ratio, consistent with the lack of phenotypic correlation between them (Pearson coefficient -0.053 p-value 0.37). However, it is interesting to note that the magnitude of these 18 associations did not change across the six models (p-values<0.05 and FDR p-value≤0.05), except for marker ePt-638303 for DBH which was not significantly associated when using the K and Q+K models. Such consistency of results, notwithstanding the slight differences in R2 estimates across models, is a promising indication that the associations are indeed real (Table 4). Nevertheless, given the limited size mapping panel, these marker-trait associations will require further validation in independent populations.

It is important to highlight, however, that while the genomic locations of the DArT-marker-trait associations found in this study should be informative, we acknowledge the fact that the estimated magnitudes of effects are likely upwardly biased. This is probably the case for most marker-trait associations and QTLs mapped so far in forest trees, although this is rarely recognized. Overestimation of the proportion of variance explained in association studies is a phenomenon that has traditionally been called the ‘winner’s curse' [76] or the ‘Beavis effect’ [77] when referring to QTLs mapped in limited size biparental crosses. Reasons for this include the usually limited sample sizes used and the fact that a single dataset is used for both discovery and parameter estimation, causing a correlation between the test statistic and the estimated marker effect size. Additionally genome-wide associations and QTLs are typically estimated ignoring the rest of the genome which also contributes to an upward bias. This problem can be mitigated by fitting all markers simultaneously as random effects, an approach that has been proposed and adopted for Genomic Selection [78] or improved ways of carrying out GWAS [79]. This approach, successfully applied in several animal and plant species, has been shown to result in a much larger number of effects detected (hundreds), with considerably smaller magnitudes (<1%), converging to a quasi-infinitesimal model while explaining very large proportions of the heritability for complex traits [80]. Recently three Genomic Selection studies were carried out in large populations (>700-900 individuals) of Pinus and Eucalyptus, all of them showing that hundreds of small marker effects distributed across the whole genome contribute to height growth and wood quality traits [34], [35], [81], in clear contrast to the long held beliefs from QTL mapping experiments of the existence of at least a few loci with large effects (5-15%) controlling such complex traits.

We compared the results of estimating markers effects simultaneously as random effects or fixed effects using Eq. 1. DArT markers effects were fitted as random using Bayesian least absolute shrinkage and selection operator (LASSO) in the BLR package for R, version 2.12.2 ([82], [83]). Results indicated that the estimated absolute effects of the eighteen significant DArT marker-trait associations (Q-value<0.05) under a fixed model (Eq. 1) were 21 and 24 times larger than those estimated under the random model (Bayesian LASSO) for DBH and S∶G ratio, respectively. Furthermore, the proportion of the genetic variance explained by the markers (2 pi (1-pi) ; where pi is the frequency of one allele at that locus and is the estimated marker effect) decrease on average from 19.64% to 0.06% for DBH and from 11.78% to 0.02% for S∶G ratio, when estimated as fixed and random effects, respectively. Increasing the size of the association mapping populations is expected to reduce these differences.

Genomic locations and putative annotations of marker-trait associations

The present study identified 18 significant DArT marker-trait associations after correcting for multiple testing and accounting for racial and family structure in the data. Fifteen of these 18 DArT marker probes had been sequenced, 13 of them were physically aligned to a unique position on the 11 chromosome scaffolds [42], and two were aligned to still unanchored small scaffolds (numbered beyond 11) (Table 5). The 15 DArT probes were assembled in 13 non redundant sequences (two contigs and 11 singletons) consistent with their alignment position reported earlier [40]. Markers ePt-575116 and ePt-639597, associated with DBH belong to the same locus located at 28,708,000 bp and markers ePt-503848 and ePt-638347, associated with S∶G ratio, map to position 30,915,259 bp (Table 5). Annotation of the 15 sequences was initially based on primary sequence homology searches. Under an E-value threshold of <1.e-10, eight DArT marker sequences, all associated with DBH, had significant BLASTX matches (Table 5) while no match to genes was found for the two DArT markers associated with S∶G ratio. Sequences with a positive BLASTX match were annotated using GO terms. As a result, GO terms were assigned to eight sequences totalizing 28 GO terms (Table 5). Blast2GO analysis at process level 3 showed that among the different biological processes (18 GO terms), the sequences belong to ‘Macromolecule Metabolic Processes’ (4), ‘Primary Metabolic Process’ (4), ‘Nitrogen compound metabolic process’ (3), ‘Cellular metabolic process’ (3), ‘Biosynthetic process’ (1), ‘Establishment of localization’ (1), and most surprisingly, ‘Response to abiotic stimulus’ (1), ‘Response to stress’ (1). Of these sequences, two were assigned with EC numbers: Serine endopeptidase (EC: 3.4.21.0) and RNA-directed DNA polymerase (EC: 2.7.7.49).

thumbnail
Table 5. Genomic position of the DArT marker-trait associations detected and putative underlying genes found by a simple BLASTX search in the Eucalyptus grandis reference genome version 1.1 (available in Phytozone) (see text for traits' abbreviations).

https://doi.org/10.1371/journal.pone.0081267.t005

Comparison of genomic position of the associations found with previous QTL mapping studies were carried out, although to date, few have been the QTL detection reports in Eucalyptus using DArT markers. Interestingly, however, one of the DArT markers (ePt-503848) associated with S∶G ratio in our population was also mapped to a QTL by Freeman et al. [44] for the same trait on linkage group 10. QTLs for lignin composition related traits were also mapped to the same segment of linkage group 10 early on by Thamarus et al. [84] for pulp yield (a trait strongly correlated with S∶G ratio), by Thumma et al. [75] also for pulp yield, and by Gion et al. [71] for Klason lignin. The strong concurrence between independent reports mapping a QTL for lignin composition traits on this region of linkage group 10 prompted us to scrutinize the corresponding genomic regions in the vicinity of our DArT marker ePt-503848, associated with S∶G ratio. This marker was positioned starting at 30,915,259 bp on chromosome scaffold 10 which has approximately 40 Mbp total size. The analysis revealed the presence of the ferulate 5-hydroxylase (F5H) gene, annotated with strong support at position 29,822,332 bp of the same chromosome 10. Ferulate 5-hydroxylase (F5H), also referred to coniferaldehyde 5-hydroxylase is a key enzyme involved in synthesizing the monolignol sinapyl alcohol and, ultimately, S lignin moieties. F5H therefore affects the partitioning between the two major monolignols, coniferyl and sinapyl alcohols. The major role of this gene in controlling the S∶G ratio was further shown by the drastic increase in the Syringyl monomer levels when overexpressed in transgenic poplars, as reported by different research groups [85], [86], [87]. The distance between DArT marker ePt-503848 and the F5H gene is slightly over 1 Mbp. However recent comparative mapping analyses showed that the considerable genome size difference between the E. grandis (640 Mbp) and E. globulus (545 Mbp) genomes is largely due to the sum of many small insertions/deletions widely distributed across the genome (Josquin Tibbits unpublished). It is therefore reasonable to speculate that this 1 Mbp difference between the marker and the gene could in fact be much smaller in the E. globulus genome. As tentative as it may be, this putative co-localization provides an appealing indirect biological validation of the association we found for S∶G ratio in our study.

Additional comparisons between the associations found in our study and QTLs mapped for diameter growth in previous reports are only possible at the coarse linkage group level. For example, as in our study, QTLs for diameter growth were also detected on linkage groups 3, 5, 7 and 10, in a recent multi-pedigree E. globulus [44] report. If we consider, however, the genome-wide results reported by Resende et al. [35] in two large hybrid Eucalyptus breeding populations with 780 and 920 individuals respectively, several hundred DArT markers associated with DBH were found spread out across all 11 chromosomes. When fitted in genomic selection models, the 200 associated DArT markers of largest effect captured over 80% of the heritability for diameter growth (DBH), although the individual effects of these markers rarely surpassed 1%. Assuming that this is the most likely genetic architecture of this growth trait in Eucalyptus, and therefore that the whole genome takes part in controlling this complex trait, comparative QTL position analyses for such multifactorial traits become too uncertain to be of any use.

Conclusions

The results of this study highlight the importance of taking into account all relevant sources of variation and assessing the relative value of using different analytical models in association mapping studies in forest trees. The approach taken in our analysis was especially rigorous to avoid declaring false marker-trait associations, generally considered more detrimental than false negatives in genome-wide associations studies. In particular, it was important to account for possible genetic structure in the data, both from regional genetic groups (races and provenances) and within population kinship relationships (cryptic family presence). It was also essential to use more stringent significant threshold levels in the tests, such as 1 or 5%, and to look at the mean squared differences between observed vs. expected p-values between the different models, when a considerable trait by model interaction was observed. Assessing the impact of different population structures and analytical models on the power and accuracy of association genetics in other Eucalyptus populations and forest tree species in general will be important to validate our results. On other hand, had phenotype prediction by a Genomic Selection approach been the goal, the converse would be true. GS estimates all marker effects simultaneously, precluding the prior search for significant associations by rigorous significance tests, but rather retaining all markers or subsets of them as predictors of performance, while focusing exclusively on selection efficiency. In such a context, most likely the several hundred associations we had found prior to stringent correction for false discoveries would be retained in a predictive model, a subject we are currently investigating, in line with recent findings in Eucalyptus [35].

Our estimates of LD corroborated our expectation that a much higher marker density would be required to carry out a genuine association genetics study in this population, although this is by far the densest genotyping coverage used specifically for association mapping in Eucalyptus to date. Moreover, given the size limitation of our mapping panel we recognize that we had limited power to detect many smaller effects, and that the marker-trait associations found, despite the high statistical stringency used to declare them, will require independent validation. This is likely the current status of most association mapping studies previously reported in Eucalyptus that used even smaller population sizes, varying from 86 to 323 and averaging 186 (reviewed by Grattapaglia et al. [88]), exception made by recent Genomic Selection experiments [35]. Nevertheless, unlike candidate gene based association studies that are inherently biased by the initial choice of what genes to assay, this association study, although carried out at a marker density far from ideal, points, in an unbiased way, to genomic regions putatively involved in controlling growth in general and S∶G ratio in particular. While several independent, although indirect, pieces of evidence were compiled from the literature pointing to the F5H gene as a candidate underlying the single marker-trait association found for S∶G ratio, in the case of volume growth the picture is certainly blurrier. As tempting as it may be to propose genes identified as candidates for controlling volume growth, given the paramount complexity of this trait, considerably more experimental evidence and independent validation would be required to do so. Additionally, from the applied standpoint, simply monitoring the inheritance of a handful of genes would hardly impact the advancement of a breeding population.

Supporting Information

Figure S1.

Distribution of expected heterozigosity (He) values for the 2,643 DArT markers genotyped in the E. globulus mapping population (average He = 0.33).

https://doi.org/10.1371/journal.pone.0081267.s001

(DOCX)

Figure S2.

Linkage Disequilibrium (LD) decay as measured by r2 for pairs of DArT markers across the genome (i.e., intra- and inter-chromosomal), against genetic distance (in cM) in the 303 E. globulus trees. The second-degree Loess fitting curve illustrates the LD decay based on the nonlinear regression of r2 on genetic distance while the horizontal line indicate the baseline r2 values based on the 95th percentile of the r2 values distribution.

https://doi.org/10.1371/journal.pone.0081267.s002

(DOCX)

Figure S3.

Boxplots of growth and wood properties variation in the studied sub-populations. See text for traits' abbreviation.

https://doi.org/10.1371/journal.pone.0081267.s003

(DOCX)

Figure S4.

Distribution of pair-wise relatedness coefficients among the 303 E. globulus trees. Values greater than 0.5 are not shown and account for only 0.08% of the distribution.

https://doi.org/10.1371/journal.pone.0081267.s004

(DOCX)

Table S1.

Significances for the differences of the least square means based on subpopulations estimated by the STRUCTURE software. See text for traits' abbreviation.

https://doi.org/10.1371/journal.pone.0081267.s005

(DOCX)

Acknowledgments

The authors are grateful to Pablo Santiago Pathauer, Juan Pablo Diez, Leonardo Sallesses who assisted with field work and data collection in the Argentina' trial, and to Mundial Forestación for maintaining the trials over the years, making the early measurements and making available the growth and Pilodyn data from the Uruguayan trials. The contribution of José Rodrigues and colleagues at the IICT lab in Portugal, in the development of specific NIR models and subsequent processing and spectral evaluation of wood samples for the wood quality traits used in this study is also greatly acknowledged. Finally, we also wish to thank Pamela Villalba for processing high quality DNA samples, and Carolina Sansaloni and Cesar Petroli for generating the DArT data.

Author Contributions

Conceived and designed the experiments: EPC SNMP YAE. Performed the experiments: MNG CA. Analyzed the data: EPC SNMP MNG CA. Contributed reagents/materials/analysis tools: EPC YAE MNG CA NMGB DG SNMP. Wrote the paper: EPC YAE NMGB DG SNMP CA. Organized field work and data collection: SNMP NMGB. Supervised the work: SNMP. Coordinated the research project: SNMP. Wrote the research project: DG NMGB SNMP.

References

  1. 1. Risch NJ (2000) Searching for genetic determinants in the new millennium. Nature 405: 847–856.
  2. 2. Neale DB, Savolainen O (2004) Association genetics of complex traits in conifers. Trends Plant Sci 9: 325–330.
  3. 3. Neale DB, Kremer A (2011) Forest tree genomics: growing resources and applications. Nature Reviews Genetics 12: 111–122.
  4. 4. Brown GR, Gill GP, Kuntz RJ, Langley CH, Neale DB (2004) Nucleotide diversity and linkage disequilibrium in loblolly pine. Proceedings of the National Academy of Sciences of the United States of America 101: 15255–15260.
  5. 5. Voight BF, Pritchard JK (2005) Confounding from cryptic relatedness in case-control association studies. Plos Genetics 1: 302–311.
  6. 6. Flint-Garcia SA, Thornsberry JM, Buckler ES (2003) Structure of linkage disequilibrium in plants. Annual Review of Plant Biology 54: 357–374.
  7. 7. Lander ES, Schork NJ (1994) Genetic Dissection of Complex Traits. Science 265: 2037–2048.
  8. 8. Devlin B, Roeder K (1999) Genomic control for association studies. Biometrics 55: 997–1004.
  9. 9. Marchini J, Cardon LR, Phillips MS, Donnelly P (2004) The effects of human population structure on large genetic association studies. Nature Genetics 36: 512–517.
  10. 10. Pritchard JK, Donnelly P (2001) Case-control studies of association in structured or admixed populations. Theoretical Population Biology 60: 227–237.
  11. 11. Yu JM, Pressoir G, Briggs WH, Bi IV, Yamasaki M, et al. (2006) A unified mixed-model method for association mapping that accounts for multiple levels of relatedness. Nature Genetics 38: 203–208.
  12. 12. Pritchard JK, Stephens M, Donnelly P (2000) Inference of population structure using multilocus genotype data. Genetics 155: 945–959.
  13. 13. Hardy OJ (2003) Estimation of pairwise relatedness between individuals and characterization of isolation-by-distance processes using dominant genetic markers. Molecular Ecology 12: 1577–1588.
  14. 14. Lynch M, Ritland K (1999) Estimation of pairwise relatedness with molecular markers. Genetics 152: 1753–1766.
  15. 15. Wang J, McClean PE, Lee R, Goos RJ, Helms T (2008) Association mapping of iron deficiency chlorosis loci in soybean (Glycine max L. Merr.) advanced breeding lines. Theoretical and Applied Genetics 116: 777–787.
  16. 16. Comadran J, Thomas WTB, van Eeuwijk FA, Ceccarelli S, Grando S, et al. (2009) Patterns of genetic diversity and linkage disequilibrium in a highly structured Hordeum vulgare association-mapping population for the Mediterranean basin. Theoretical and Applied Genetics 119: 175–187.
  17. 17. Gutierrez L, Cuesta-Marcos A, Castro AJ, von Zitzewitz J, Schmitt M, et al. (2011) Association Mapping of Malting Quality Quantitative Trait Loci in Winter Barley: Positive Signals from Small Germplasm Arrays. Plant Genome 4: 256–272.
  18. 18. Del Carpio DP, Basnet RK, De Vos RCH, Maliepaard C, Paulo MJ, et al. (2011) Comparative Methods for Association Studies: A Case Study on Metabolite Variation in a Brassica rapa Core Collection. Plos One 6: e19624
  19. 19. Stich B, Mohring J, Piepho HP, Heckenberger M, Buckler ES, et al. (2008) Comparison of mixed-model approaches for association mapping. Genetics 178: 1745–1754.
  20. 20. El-Kassaby YA (1982) Association between allozyme genotypes and quantitative traits in Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco]. Genetics 101: 103–115.
  21. 21. Thumma BR, Nolan MR, Evans R, Moran GF (2005) Polymorphisms in cinnamoyl CoA reductase (CCR) are associated with variation in microfibril angle in Eucalyptus spp. Genetics 171: 1257–1265.
  22. 22. Gonzalez-Martinez SC, Wheeler NC, Ersoz E, Nelson CD, Neale DB (2007) Association genetics in Pinus taeda L. I. Wood property traits. Genetics 175: 399–409.
  23. 23. Ingvarsson PK, Garcia MV, Luquez V, Hall D, Jansson S (2008) Nucleotide polymorphism and phenotypic associations within and around the phytochrome B2 Locus in European aspen (Populus tremula, Salicaceae). Genetics 178: 2217–2226.
  24. 24. Eckert AJ, Bower AD, Wegrzyn JL, Pande B, Jermstad KD, et al. (2009) Asssociation Genetics of Coastal Douglas Fir (Pseudotsuga menziesu var. menziesii, Pinaceae). I. Cold-Hardiness Related Traits. Genetics 182: 1289–1302.
  25. 25. Holliday JA, Ritland K, Aitken SN (2010) Widespread, ecologically relevant genetic markers developed from association mapping of climate-related traits in Sitka spruce (Picea sitchensis). New Phytologist 188: 501–514.
  26. 26. Wegrzyn JL, Eckert AJ, Choi M, Lee JM, Stanton BJ, et al. (2010) Association genetics of traits controlling lignin and cellulose biosynthesis in black cottonwood (Populus trichocarpa, Salicaceae) secondary xylem. New Phytologist 188: 515–532.
  27. 27. Quesada T, Gopal V, Cumbie WP, Eckert AJ, Wegrzyn JL, et al. (2010) Association Mapping of Quantitative Disease Resistance in a Natural Population of Loblolly Pine (Pinus taeda L.). Genetics 186: 677–686.
  28. 28. Cumbie WP, Eckert A, Wegrzyn J, Whetten R, Neale D, et al. (2011) Association genetics of carbon isotope discrimination, height and foliar nitrogen in a natural population of Pinus taeda L. Heredity 107: 105–114.
  29. 29. Lepoittevin C, Harvengt L, Plomion C, Garnier-Gere P (2012) Association mapping for growth, straightness and wood chemistry traits in the Pinus pinaster Aquitaine breeding population. Tree Genetics & Genomes 8: 113–126.
  30. 30. Mandrou E, Hein PRG, Villar E, Vigneron P, Plomion C, et al. (2012) A candidate gene for lignin composition in Eucalyptus: cinnamoyl-CoA reductase (CCR). Tree Genetics & Genomes 8: 353–364.
  31. 31. Denis M, Favreau B, Ueno S, Camus-Kulandaivelu L, Chaix G, et al. (2013) Genetic variation of wood chemical traits and association with underlying genes in Eucalyptus urophylla. Tree Genetics & Genomes 9: 927–942.
  32. 32. Gonzalez-Martinez SC, Huber D, Ersoz E, Davis JM, Neale DB (2008) Association genetics in Pinus taeda L. II. Carbon isotope discrimination. Heredity 101: 19–26.
  33. 33. Parchman TL, Gompert Z, Mudge J, Schilkey FD, Benkman CW, et al. (2012) Genome-wide association genetics of an adaptive trait in lodgepole pine. Molecular Ecology 21: 2991–3005.
  34. 34. Resende MFR, Munoz P, Acosta JJ, Peter GF, Davis JM, et al. (2012) Accelerating the domestication of trees using genomic selection: accuracy of prediction models across ages and environments. New Phytologist 193: 617–624.
  35. 35. Resende MDV, Resende MFR, Sansaloni CP, Petroli CD, Missiaggia AA, et al. (2012) Genomic selection for growth and wood quality in Eucalyptus: capturing the missing heritability and accelerating breeding for complex traits in forest trees. New Phytologist 194: 116–128.
  36. 36. Sansaloni CP, Petroli CD, Carling J, Hudson CJ, Steane DA, et al. (2010) A high-density Diversity Arrays Technology (DArT) microarray for genome-wide genotyping in Eucalyptus. Plant Methods 6: 16–26.
  37. 37. Jaccoud D, Peng K, Feinstein D, Kilian A (2001) Diversity arrays: a solid state technology for sequence information independent genotyping. Nucleic Acids Res 29: e25.
  38. 38. Steane DA, Nicolle D, Sansaloni CP, Petroli CD, Carling J, et al. (2011) Population genetic analysis and phylogeny reconstruction in Eucalyptus (Myrtaceae) using high-throughput, genome-wide genotyping. Mol Phylogenet Evol 59: 206–224.
  39. 39. Hudson C, Kullan A, Freeman J, Faria D, Grattapaglia D, et al. (2011) High synteny and colinearity among Eucalyptus genomes revealed by high-density comparative genetic mapping. Tree Genetics & Genomes 8: 339–352.
  40. 40. Hudson CJ, Freeman JS, Kullan AR, Petroli CD, Sansaloni CP, et al. (2012) A reference linkage map for Eucalyptus. BMC Genomics 13: 240
  41. 41. Kullan ARK, van Dyk MM, Jones N, Kanzler A, Bayley A, et al. (2012) High-density genetic linkage maps with over 2,400 sequence-anchored DArT markers for genetic dissection in an F2 pseudo-backcross of Eucalyptus grandis x E. urophylla. Tree Genetics & Genomes 8: 163–175.
  42. 42. Petroli CD, Sansaloni CP, Carling J, Steane DA, Vaillancourt RE, et al. (2012) Genomic Characterization of DArT Markers Based on High-Density Linkage Analysis and Physical Mapping to the Eucalyptus Genome. Plos One 7: e44684
  43. 43. Kullan ARK, van Dyk MM, Hefer CA, Jones N, Kanzler A, et al. (2012) Genetic dissection of growth, wood basic density and gene expression in interspecific backcrosses of Eucalyptus grandis and E. urophylla. BMC Genetics 13: 60–71.
  44. 44. Freeman JS, Potts BM, Downes GM, Pilbeam D, Thavamanikumar S, et al.. (2013) Stability of quantitative trait loci for growth and wood properties across multiple pedigrees and environments in Eucalyptus globulus. New Phytol.
  45. 45. Marcucci Poltri S, Borralho N, Rodrigues JC, Elizaul J, Vera de Ortiz M, et al. (2011) Biotech MERCOSUR project: an integrated genotyping and phenotyping platform of Eucalyptus germplasm for mapping purposes. BMC Proceedings 5: P33.
  46. 46. Lopez GA, Potts BM, Dutkowski GW, Traverso JMR (2001) Quantitative genetics of Eucalyptus globulus: Affinities of land race and native stand localities. Silvae Genetica 50: 244–252.
  47. 47. Williams P, Sobering D (1992) Whole-Seed Grain Analysis by near-Infrared Transmittance and Reflectance - a Comparison. Near Infra-Red Spectroscopy, pp. 441–446.
  48. 48. Alves A, Santos A, Rozenberg P, Paques LE, Charpentier JP, et al. (2012) A common near infrared-based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix x eurolepis. Wood Science and Technology 46: 157–175.
  49. 49. Hardy OJ, Vekemans X (2002) SPAGEDi: a versatile computer program to analyse spatial genetic structure at the individual or population levels. Molecular Ecology Notes 2: 618–620.
  50. 50. Evanno G, Regnaut S, Goudet J (2005) Detecting the number of clusters of individuals using the software STRUCTURE: a simulation study. Molecular Ecology 14: 2611–2620.
  51. 51. Bradbury PJ, Zhang Z, Kroon DE, Casstevens TM, Ramdoss Y, et al. (2007) TASSEL: software for association mapping of complex traits in diverse samples. Bioinformatics 23: 2633–2635.
  52. 52. Weir BS (1996) Genetic data analysis, II: Methods for discrete population genetic data. Inc. SA, editor.
  53. 53. Breseghello F, Sorrells ME (2006) Association mapping of kernel size and milling quality in wheat (Triticum aestivum L.) cultivars. Genetics 172: 1165–1177.
  54. 54. Price AL, Patterson NJ, Plenge RM, Weinblatt ME, Shadick NA, et al. (2006) Principal components analysis corrects for stratification in genome-wide association studies. Nature Genetics 38: 904–909.
  55. 55. Benjamini Y, Drai D, Elmer G, Kafkafi N, Golani I (2001) Controlling the false discovery rate in behavior genetics research. Behavioural Brain Research 125: 279–284.
  56. 56. Storey JD, Tibshirani R (2003) Statistical significance for genomewide studies. Proceedings of the National Academy of Sciences of the United States of America 100: 9440–9445.
  57. 57. SAS-Institute (2002) SAS User's Guide: Statistics. Version 9.1. In: SAS Institute Inc C, NC., editor.
  58. 58. Conesa A, Gotz S, Garcia-Gomez JM, Terol J, Talon M, et al. (2005) Blast2GO: a universal tool for annotation, visualization and analysis in functional genomics research. Bioinformatics 21: 3674–3676.
  59. 59. Ashburner M, Ball CA, Blake JA, Botstein D, Butler H, et al. (2000) Gene Ontology: tool for the unification of biology. Nature Genetics 25: 25–29.
  60. 60. Grattapaglia D, Kirst M (2008) Eucalyptus applied genomics: from gene sequences to breeding tools. New Phytologist 179: 911–929.
  61. 61. Arumugasundaram S, Ghosh M, Veerasamy S, Ramasamy Y (2011) Species Discrimination, Population Structure and Linkage Disequilibrium in Eucalyptus camaldulensis and Eucalyptus tereticornis Using SSR Markers. Plos One 6: e28252
  62. 62. Dutkowski GW, Potts BM (1999) Geographic patterns of genetic variation in Eucalyptus globulus ssp globulus and a revised racial classification. Australian Journal of Botany 47: 237–263.
  63. 63. Jones RC, Steane DA, Potts BM, Vaillancourt RE (2002) Microsatellite and morphological analysis of Eucalyptus globulus populations. Canadian Journal of Forest Research-Revue Canadienne De Recherche Forestiere 32: 59–66.
  64. 64. Steane DA, Conod N, Jones RC, Vaillancourt RE, Potts BM (2006) A comparative analysis of population structure of a forest tree, Eucalyptus globulus (Myrtaceae), using microsatellite markers and quantitative traits. Tree Genetics & Genomes 2: 30–38.
  65. 65. Freeman JS, Marques CMP, Carocha V, Borralho N, Potts BM, et al. (2007) Origins and diversity of the Portuguese Landrace of Eucalyptus globulus. Annals of Forest Science 64: 639–647.
  66. 66. Kulheim C, Yeoh SH, Wallis IR, Laffan S, Moran GF, et al. (2011) The molecular basis of quantitative variation in foliar secondary metabolites in Eucalyptus globulus. New Phytologist 191: 1041–1053.
  67. 67. Sansaloni C, Petroli C, Jaccoud D, Carling J, Detering F, et al. (2011) Diversity Arrays Technology (DArT) and next-generation sequencing combined: genome-wide, high throughput, highly informative genotyping for molecular breeding of Eucalyptus. BMC Proceedings 5: P54.
  68. 68. Neves LG, Davis JM, Barbazuk WB, Kirst M (2013) Whole-exome targeted sequencing of the uncharacterized pine genome. Plant J 75: 146–156.
  69. 69. Zhou L, Holliday JA (2012) Targeted enrichment of the black cottonwood (Populus trichocarpa) gene space using sequence capture. BMC Genomics 13: 703
  70. 70. Zhao KY, Aranzana MJ, Kim S, Lister C, Shindo C, et al.. (2007) An Arabidopsis example of association mapping in structured samples. Plos Genetics 3.
  71. 71. Gion JM, Carouche A, Deweer S, Bedon F, Pichavant F, et al. (2011) Comprehensive genetic dissection of wood properties in a widely-grown tropical tree: Eucalyptus. BMC Genomics 12: 301.
  72. 72. Bundock PC, Potts BM, Vaillancourt RE (2008) Detection and stability of quantitative trait loci (QTL) in Eucalyptus globulus. Tree Genetics & Genomes 4: 85–95.
  73. 73. Freeman JS, Whittock SP, Potts BM, Vaillancourt RE (2009) QTL influencing growth and wood properties in Eucalyptus globulus. Tree Genetics & Genomes 5: 713–722.
  74. 74. Thumma BR, Baltunis BS, Bell JC, Emebiri LC, Moran GF, et al. (2010) Quantitative trait locus (QTL) analysis of growth and vegetative propagation traits in Eucalyptus nitens full-sib families. Tree Genetics & Genomes 6: 877–889.
  75. 75. Thumma BR, Southerton SG, Bell JC, Owen JV, Henery ML, et al. (2010) Quantitative trait locus (QTL) analysis of wood quality traits in Eucalyptus nitens. Tree Genetics & Genomes 6: 305–317.
  76. 76. Goring HHH, Terwilliger JD, Blangero J (2001) Large upward bias in estimation of locus-specific effects from genomewide scans. American Journal of Human Genetics 69: 1357–1369.
  77. 77. Beavis WD (1998) QTL analyses: power, precision, and accuracy. In: Patterson AH, editor. Molecular dissection of complex traits. Boca Raton, Florida: CRC Publishing. pp. 145–162.
  78. 78. Meuwissen TH, Hayes BJ, Goddard ME (2001) Prediction of total genetic value using genome-wide dense marker maps. Genetics 157: 1819–1829.
  79. 79. Kemper KE, Daetwyler HD, Visscher PM, Goddard ME (2012) Comparing linkage and association analyses in sheep points to a better way of doing GWAS. Genetics Research 94: 191–203.
  80. 80. Goddard ME, Hayes BJ (2009) Mapping genes for complex traits in domestic animals and their use in breeding programmes. Nature Reviews Genetics 10: 381–391.
  81. 81. Resende MFR, Munoz P, Resende MDV, Garrick DJ, Fernando RL, et al. (2012) Accuracy of Genomic Selection Methods in a Standard Data Set of Loblolly Pine (Pinus taeda L.). Genetics 190: 1503–1510.
  82. 82. R.Development.Core.Team (2011) R: A language and environment for statistical computing. http://wwwr-projectorg.
  83. 83. Perez P, de Los Campos G, Crossa J, Gianola D (2010) Genomic-Enabled Prediction Based on Molecular Markers and Pedigree Using the Bayesian Linear Regression Package in R. Plant Genome. 3: 106–116.
  84. 84. Thamarus K, Groom K, Bradley A, Raymond CA, Schimleck LR, et al. (2004) Identification of quantitative trait loci for wood and fibre properties in two full-sib properties of Eucalyptus globulus. Theor Appl Genet 109: 856–864.
  85. 85. Huntley SK, Ellis D, Gilbert M, Chapple C, Mansfield SD (2003) Significant increases in pulping efficiency in C4H-F5H-transformed poplars: Improved chemical savings and reduced environmental toxins. Journal of Agricultural and Food Chemistry 51: 6178–6183.
  86. 86. Li L, Zhou YH, Cheng XF, Sun JY, Marita JM, et al. (2003) Combinatorial modification of multiple lignin traits in trees through multigene cotransformation. Proceedings of the National Academy of Sciences of the United States of America 100: 4939–4944.
  87. 87. Stewart JJ, Akiyama T, Chapple C, Ralph J, Mansfield SD (2009) The Effects on Lignin Structure of Overexpression of Ferulate 5-Hydroxylase in Hybrid Poplar. Plant Physiology 150: 621–635.
  88. 88. Grattapaglia D, Vaillancourt RE, Shepherd M, Thumma BR, Foley W, et al. (2012) Progress in Myrtaceae genetics and genomics: Eucalyptus as the pivotal genus. Tree Genetics & Genomes 8: 463–508.