Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Genetic Dissection of Grain Size and Grain Number Trade-Offs in CIMMYT Wheat Germplasm

  • Simon Griffiths ,

    simon.griffiths@jic.ac.uk

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • Luzie Wingen,

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • Julian Pietragalla,

    Affiliation CIMMYT, Int. Apdo. Postal 6-641, 06600 México, DF, Mexico

  • Guillermo Garcia,

    Affiliation Cátedra de Cerealicultura, Departamento de Producción Vegetal, and IFEVA-CONICET, Facultad de Agronomía, Universidad de Buenos Aires, Av. San Martin 4453, C1417DSE Buenos Aires, Argentina

  • Ahmed Hasan,

    Affiliation Plant Production and Plant Protection Institute, Universidad Austral de Chile, Campus Isla Teja, Valdivia, Chile

  • Daniel Miralles,

    Affiliation Cátedra de Cerealicultura, Departamento de Producción Vegetal, and IFEVA-CONICET, Facultad de Agronomía, Universidad de Buenos Aires, Av. San Martin 4453, C1417DSE Buenos Aires, Argentina

  • Daniel F. Calderini,

    Affiliation Plant Production and Plant Protection Institute, Universidad Austral de Chile, Campus Isla Teja, Valdivia, Chile

  • Jignaben Bipinchandra Ankleshwaria,

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • Michelle Leverington Waite,

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • James Simmonds,

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • John Snape,

    Affiliation John Innes Centre, Norwich research Park, Norwich, NR4 7UH, Norfolk, United Kingdom

  • Matthew Reynolds

    Affiliation CIMMYT, Int. Apdo. Postal 6-641, 06600 México, DF, Mexico

Abstract

Grain weight (GW) and number per unit area of land (GN) are the primary components of grain yield in wheat. In segregating populations both yield components often show a negative correlation among themselves. Here we use a recombinant doubled haploid population of 105 individuals developed from the CIMMYT varieties Weebill and Bacanora to understand the relative contribution of these components to grain yield and their interaction with each other. Weebill was chosen for its high GW and Bacanora for high GN. The population was phenotyped in Mexico, Argentina, Chile and the UK. Two loci influencing grain yield were indicated on 1B and 7B after QTL analysis. Weebill contributed the increasing alleles. The 1B effect, which is probably caused by to the 1BL.1RS rye introgression in Bacanora, was a result of increased GN, whereas, the 7B QTL controls GW. We concluded that increased in GW from Weebill 7B allele is not accompanied by a significant reduction in grain number. The extent of the GW and GN trade-off is reduced. This makes this locus an attractive target for marker assisted selection to develop high yielding bold grain varieties like Weebill. AMMI analysis was used to show that the 7B Weebill allele appears to contribute to yield stability.

Introduction

In many plant species there is a negative correlation between the number of seeds produced and the size of those seeds [1]. Genetic and physiological understanding of this trade-off is fundamental to increasing yield gains in crops for which the seed are the harvested part. Amongst these crops, wheat, rice and maize provide the staple foods of the world. For wheat, recent years have seen the rate of increase in production slow down, and the need for a new effort in the genetic improvement of this crop has been highlighted [24]. Up to now, genetic gains in grain yield potential of wheat have mainly been achieved by increasing grain number per unit area of land [5]. Breeders have selected varieties in which the extent of the grain weight trade-off is minimised. Generally, genetic gain for grain yield has been achieved as a product of stable or even reduced GW, but increased GN. This echoes a broader phenomenon for flowering plants in which GW displays low levels of phenotypic plasticity relative to GN, which is highly plastic in response to the environment and more genetically variable [1].

In spite of this general trend, it is possible to produce high yielding wheat varieties with large grains. Breeding strategies at the International Centre for the Improvement of Maize and Wheat (CIMMYT) have led to the development of a series of successful varieties widely adapted to target mega-environments (MEs) (Braun et al., 1996). Some CIMMYT varieties are notable in that they achieve high grain yields with a relatively large contribution from GW. For example, the CIMMYT bred varieties Baviacora and Kambara were identified as large grain types [6]. The characteristics of these varieties are known to be useful because the large grain trait, often referred to as bold seed, is preferred in many markets, improves the milling efficiency [7] and also aids the establishment of seedlings in stressed environments [8]. It is also the case that although historical progress in breeding is clearly associated with GN, GW is often associated with grain yield in the physiological assessment of contemporaneous varietal panels [9]. It is possible that other beneficial effects of the large grain trait in these varieties are not yet understood, but that multi-site selection for grain yield per se and grain yield stability has acted on this trait. Looking towards future grain yield gains, understanding the genetic and physiological basis of high GW in these varieties could facilitate the optimal expression of both yield components.

Here we present genetic and physiological analysis of a segregating population derived from two CIMMYT varieties, Weebill and Bacanora which are well adapted to similar environments but differ for the dominant grain yield components [1011]. We present a single QTL that increases grain size without reducing grain number per unit area. This explains some of the large grain with high yield characteristics of Weebill. By growing the Weebill x Bacanora doubled haploid population at sites in Mexico, Argentina, Chile, and the UK, we show that this grain size QTL is very stably expressed and may contribute to yield stability across diverse environments in large grain varieties like Weebill.

Results

Grain yield in Weebill, Bacanora, and the WxB population

Yield data for Weebil, Bacanora, and WxB population means together with components of variance and trait heritabilities are shown in Table 1. The four years trial data in Mexico (Ob_07, Ob_08, Ob_09, Ob_10), two in the UK (CF_8 and CF_10), two in Chile (Va_09 and Va_10), and one in Argentina (BA_09) provided an environmental range that produced mean population grain yields from 5.5 t ha−1 (CF_10) to 12.2 t ha−1 (Va_10). The climatic data presented in Table A in S1 File goes some way to explaining this range. The low yield at CF_10 coincides with a very dry period over SEP and GFP (April to July) with rainfall 59% below the local average during these months in 2010. The rainfall for CF_08 is close to the local average. All non UK trials were irrigated so variability in rainfall is not likely to be a major factor explaining variation in grain yield for these experiments. The very high yields of Valdivia are accompanied by the highest rates of PAR at all growth stages, except for Va_09 at GFP for which Ob_10 recorded a higher figure, 10.6 and 12.4 MJ m-2 d-1 respectively. With the exception of one trial, BA_09, Weebill was the highest yielding parent in all environments. The positive difference was greatest in CF_10 where Weebill produced 31.3% more grain yield than Bacanora, and least in Ob_10, where the figure was 1.7%.

thumbnail
Table 1. Mean grain yield and its numerical components for Weebill, Bacanora and WxB doubled haploid population.

https://doi.org/10.1371/journal.pone.0118847.t001

F, F statistic; df, degrees of freedom; df.res; df in the residuals; sum.sq; sums of square for trait; sum.sq.res, sums of square for residuals; mean.sq, means of square for trait; mean.sq.res, means of square for residuals; anovamean, mean from the linear model (or anova); ranef.se, standard errors of random effects; site, site; year. NA indicates that data was not available. Equivalent data for DTAD, DTEM, and HT are shown in Table D in S1 File.

Genotype x Environment interactions for GRYLD were investigated further using AMMI (Additive Main effect Multiplicative Interaction) analysis [12]. AMMI1 and AMMI2 biplots [13] are shown in Fig. 1 and 2. Both plots show that the two parents display low levels of interaction with the environment (close to zero for Principle component 1 and 2). A number of segregants, such as WB05, WB90, and WB41 showed consistent transgressive segregation for GRYLD combined with yield stability (low PC1 and PC2 values) equal to the elite parental varieties. Other genotypes also showed high average yield but with stronger environmental interaction. So WB94 gave the same mean GRYLD as WB41 but with less stability. The Chilean trial site, Valdivia, proved to be the highest yield potential environment for this population in both years. The lines WB28, WB89, and WB94 had highest average yield but were specifically adapted to the very high yield potential environment of Valdivia.

thumbnail
Fig 1. AMMI 1 plot of grain yield for Weebill, Bacanora, and WxB segregating population.

See Tables A and B in S1 File for full descriptions of environments. Yield is the mean of all environments shown. Genotype close to 0 for PC1 (Principal component 1) show low levels of environmental interaction for this trait. Proximity to an environment data point indicates that the genotype in question is relatively well adapted to that environment.

https://doi.org/10.1371/journal.pone.0118847.g001

thumbnail
Fig 2. AMMI 2 plot.

Principal components 1 and 2 from AMMI analysis of grain yield are plotted against each other. Genotypes closest to zero for PC1 and PC2 show the highest levels of yield stability. Genotypes carrying the Weebill (increasing) allele of the 7B grain size QTL are shown in dark blue.

https://doi.org/10.1371/journal.pone.0118847.g002

Components of grain yield in Weebil x Bacanora

The majority of traits were quantitatively inherited. However, this was not the case for heading date in Ob_07,Ob_08, Ob_09, or Va_08, Va_09. This is because the two parents carry different dominant genes conferring spring habit so one quarter of the segregants are winter types. In these years vernalization requirement was not fully satisfied so heading date was not normally distributed. Correlation of heading date with GRYLD, GRpsqm, and TGRWT is shown in Table 2. There was significant positive correlation of heading date with GRYLD in five out of nine environments. In all cases this was driven by positive GRpssqm and also occurred when vernalization requirement was fully satisfied, as in CF_10. In terms of TGRWT, the main focus of this study, there was a highly significant negative correlation in Ob_09 (−0.36, p<0.0010) and less significant negative correlations (−0.23 to 0.27, p<0.05 threshold) in Va_09, Va_08, and Ob_07. There is no indication from this data that increased grain size without concomitant trade off in grain number is realted to variation in heading date in W x B.

thumbnail
Table 2. Correlation of GRYLD, GRpsqm and TGRWT with heading date.

https://doi.org/10.1371/journal.pone.0118847.t002

Analyses of variance (ANOVA) showed significant genotypic effect on all traits measured, this analysis is shown in Table 1. The TGRWT and GRpsqm data validated the selection of these parents to dissect grain number/size relationships in bread wheat. Bacanora produces more grain per unit area than Weebill (between 6% and 32% greater) in all environments, except Ob_07 (7% less) but Weebill consistently has a greater TGRWT than Bacanora (between 10% and 40% greater).

To gain insight into how other traits fit into the relationship of GRpsqm and TGRWT with GRYLD in WxB, the correlation of all traits with grain yield was analysed. Correlation of GRYLD with TGRWT and GRpsqm are shown in Table 3. In all environments the strongest positive correlation with GRYLD was GRpsqm. TGRWT was not correlated with grain yield, except for BA_09 where both yield components explained GRYLD similarly.

thumbnail
Table 3. Correlation coefficients of thousand grain weight (TGRWT) and grains per unit area of land (GRpsqm) with grain yield (GRYLD).

https://doi.org/10.1371/journal.pone.0118847.t003

The correlations of GRpsqm with its numerical components are shown in Table 4. All were positively correlated with GRpsqm). Across environments, grain number per spike (GRNBpSP) exhibits the highest correlation coefficients, suggesting that this is a relatively stable determinant of grain number in diverse environments and across different sowing rates adopted at each environment. The data provides some evidence of buffering between these related traits. Thus, in Ob_10, GRNBpSP shows a relatively low and non significant correlation with GRNpsqm (0.139), but it is in this environment that the correlation with spike number per square metre (SPNBpsqm) was the highest (0.52). The trait that showed some of the highest correlation with GRNpsqm, particularly in the environments with high yield potential, was above ground biomass (PLBM). When significant this ranged from 0.43 atCF_10 to 0.756 in Va_09. In all but two cases, BA_09 and Ob_10, Ht is also associated with increases in GRNpsqm the highest value being 0.6 from CF_10, but no significant correlation in BA_09 or Ob_10.

thumbnail
Table 4. Correlation coefficients of the determinants of grain number and biomass traits with grains per unit area of land (GRpsqm), full trait names are given in Methods, Env is environment, full environment names are in Table C in S1 File.

https://doi.org/10.1371/journal.pone.0118847.t004

Grain yield QTL and coincident yield component QTL

Table 5 shows QTL identified through independent analysis of data from each environment, where growth habit was segregating a number of pleiotropic effects cosegregated with Vrn-B1, these are not the focus of this study and are not included in Table 5. All significant QTL identified together with more information on genetic location are shown in Table B in S1 File. Fig. 3 shows the chromosomal location of QTL identified in more than three environments. As the focus of this analysis is the relationship between grain size, grain number, and grain yield the description of effects will begin with cases in which allelic variation for yield components was detectable as a yield effect, while bearing in mind the relatively low heritability of grain yield compared to yield component traits and the QTL detection power provided by a population of 105 doubled haploid individuals. QTL for GRYLD were identified in four of the nine environments sampled. They were on 1B in Ob_08, Ob_09 and 7B in Ob_07 and BA_09. In all cases the yield increasing allele was from Weebill with additive effects of 0.41, 0.23, 0.23, and 0.58 t ha−1, respectively.

thumbnail
Fig 3. Chromosomal locations of QTL identified in Weebill x Bacanora.

Chromosomes carrying QTL for the same trait identified in more than two environments are shown. Coloured bars represent QTL confidence interval. Shortened trait names are given in methods. Trait names are appended with names of environments in which they were detected (see Table C in S1 File).

https://doi.org/10.1371/journal.pone.0118847.g003

thumbnail
Table 5. QTL with a LOD score greater than 2 excluding those that collocated with Vrn-B1.

https://doi.org/10.1371/journal.pone.0118847.t005

As much as possible, QTL analysis of data for the primary yield components of TGRWT and GRpsqm, were used to show the extent to which each of these trait components contributed to the yield effects identified. The most likely yield component effects underlying the 1B GRYLD QTL detected in Ob_08 and Ob_09 were QTL for increasing grain number (GRpsqm) with additive effects of 1629 to 989 grains per m2 from Weebill in the same year and locations. The relatively low QTL detection power provided by 105 individuals of the Weebill x Bacanora population means that we cannot say how likely the Ob_08 and Ob_09 QTL are to be the same, in that they are caused by the same polymorphism. However, the Ob_08 1B GRpsqm QTL is detected together with a SPNBpsqm increasing allele from Weebill with an additive effect of 21 spikes per square metre. This suggests that the basis of the yield effect could be increased spike production in this case. Unfortunately, SPNBpsqm data for Ob_09 was not available so the basis of increased grain number cannot be commented on for the Ob_09 1B GRYLD QTL. Taking into consideration the question of locus specific GW and GN trade off, it can be seen that in Ob_08 there was a coincident 1B effect of reduced TGRWT, with the decreasing allele from Weebill carrying an additive effect of 1.36 g.

The 7B yield QTLs detected in Ob_07 and BA_09 are not associated with positive GN effects but are located in the same region as QTL for which with Weebill alleles increase TGRWT with an additive effect of 1.55 g and 2.36g, respectively. Considering GW and GN trade off in this case, it can be seen that no increasing effects for GRpsqm are detected from Bacanora alleles at this locus.

Primary yield component QTL not coincident with 1B and 7B yield QTL

In addition to the two GRpsqm QTL on 1B that are coincident with yield effects (Ob_08 and Ob_09), the positive effect on GRpsqm of Weebill alleles at this locus was also detected in Va_08, Va_09, Ob_07, and Ob_10. In all of these experiments, apart from Va_08, a coincident 1B QTL for TGRWT was identified with the decreasing allele from Weebill, so preventing the increase in GN from being expressed as GRYLD. In spite of the fact that the main driver of GRYLD in the populations as a whole is GRpsqm, the potential of the 1B GRpsqm QTL to manifest itself as a GRYLD QTL is limited, in most of the environments sampled, by the negative trade off effect of increased GRpsqm on TGRWT.

The increasing effect on TGRWT from Weebill on 7B, like 1B, is found together with GRYLD QTL in two environments (Ob_07 and BA_09). It was also detected as an effect on TGRWT without yield in Ob_08, Ob_10, and CF_10 with additive effects ranging from 1.5 to 1.7g of TGRWT, but in these cases with no detectable effect on GRYLD. This QTL was not collocated with a depressive effect on GRpsqm from Weebill in any of the environments tested. So, although the increasing effect of the 7B Weebill allele is not always translated into grain yield, it does appear that Weebill alleles at this locus have the potential to confer larger grain size with a very limited trade-off for GN. The relatively consistent TGRWT QTL detected on 7B might not always be identified as GRYLD QTL because of the lower heritability of grain yield (Table 1) and some reduction in GRpsqm that was not identified as a significant QTL.

QTL for components of grain number

In this study the trait most associated with grain yield at the whole population level was GRpsqm. At the whole population level, the components of GRpsqm most consistently correlated with grain yield were grain number per spike (GRNBpSP) and spike number per unit land area (SPNBpsqm). However, no QTL for GRNBpSP were identified. There are seven QTL identified for SPNBpsqm. On 1A, QTL for SPNBpsqm, with increasing effects from Bacanora, were identified in Ob_07, Ob_10, and BA_09 with additive effects of 12–27 spikes per square meter. QTL for SPNBpsqm with increasing effects from Weebill were identified on 1B in Ob_08 and Ob_10 with additive effects of 21 and 13 spikes per square meter. Single effects were also found in BA_09 on 2A and in Ob_08 on 4A.

Other QTL associated with 1B and 7B yield effects

Loci at 1B and 7B emerged as QTL ‘hotspots’ in the analysis of Weebill x Bacanora data, see Fig. 3. This included traits other than the direct components of grain yield. At the whole population level, biomass traits showed high correlations with GRYLD confirming previous observations in the WxB population [1011]. The most frequently detected biomass effects were on 1B. Bacanora alleles on 1B that increased tiller biomass TBM in Ob_07, Ob_08, and Ob_09, final spike biomass (SPBM) in Ob_07, and final plant biomass (PLBM) in Ob_07. For 7B the BA_09 yield QTL is accompanied by a Weebill increasing effect for PLBM.

The rate of grain filling was measured in Argentina, Chile and Mexico. In BA_09 and Va_09, Weebill alleles increased the rate of grain fill with additive effects of 55 and 28 mg d−1. There seem to be multiple effects on inflorescence growth as a whole, as another pleiotropic or linked effect for the 7B QTL is an increase in spike length from Weebill alleles. This was observed in three of the four environments in which it was measured, Ob_07, Ob_08, and Ob_09, with a full substitution effect of 7.6–9.2mm.

Other QTL for agronomic traits

For crop height six QTL with additive effects between 1.4 and 3 cm were identified. Three of these are specific to single environments (3A in Va_09, 4A in Ob_09, and 6A in Ob_10), but 4A effects (independent from the Ob_09 QTL) were detected in BA_09, Va_08, and Va_09 with the increasing allele from Bacanora. For ear emergence one major effect was identified at Vrn-B1 when vernalization requirement was not satisfied (data not shown). The spring habit gene which Bacanora carries was not identified, but the genetic map did include coverage of Vrn-1 regions of 5D and 5A.

The effect of 1B and 7B QTL on yield stability

In an attempt to test whether the GRYLD QTL identified in this study might have any effects on adaptation we used AMMI statistics to calculate the effects of QTL on yield stability. In Fig. 2, WxB lines carrying the Weebill allele of the 7B TGRWT/GRYLD effect are shown in dark blue. Fig. 4 shows that the lines carrying the Weebill allele were significantly closer (see methods section for calculation of significance) to a PC1 and PC2 value of zero than those carrying the Bacanora allele, and therefore displayed higher levels of yield stability. When the same process was repeated for the 1B GRYLD QTL, there was no significant clustering of either allele towards the centre of the AMMI2 plot.

thumbnail
Fig 4. Estimating the effect of 7B grain yield QTL on yield stability.

The distribution represents the frequency of summed distances from the point of AMMI2 plots where PC1 and PC2 are equal to zero in 1000 random permutations for the number of lines carrying the Weebill allele of the 7B GRYL QTL described in the text. The summed distances for actual data set (dark blue circles in Fig. 2) occurred in less than 2% of the simulated data sets, marked with vertical red line labelled 7B.

https://doi.org/10.1371/journal.pone.0118847.g004

Discussion

Through the process of wheat breeding, direct selection for grain yield per se mostly results in an increase in grains per unit area, because this is by far the most plastic of the two yield components [1]. However, maximum theoretical yield potential require a minimisation of the resultant GW trade-off. Here we confirm that progeny of a cross between varieties with similar yield potential but differing in the balance of yield components results in extensive transgressive segregation for grain yield and yield stability as was described in the same population by [1011]. Our data confirms the findings of most studies of yield progress in bread wheat, that grains per unit area is the component most closely correlated with grain yield [5]. However, the highest yielding segregants in the WxB population are those that show the greatest positive deviation from the negative correlation of grain size and number. This is a breeding truism, the highest yielding segregants are those with the most grains and the biggest. The work described here sheds some light on specific genetic variation that can be deployed to achieve this.

Two grain yield QTL were identified and analysed in the context of GW and GN trade-off. The effect on chromosome 1B could be a consequence of the segregation of the 1RS rye translocation in this population. The 1BL.1RS translocation was introduced into CIMMYT germplasm through Veery lines based on crosses with North American germplasm. This clearly introduced novel disease resistance, but effects on grain yield have been less clear with positive and negative effects seen in a series of studies [1418], presumably due to interactions with environment and genetic background. In this study, and despite the positive effect on biomass detected in some environments, WxB segregants carrying the translocation generally display lower grain yield and no crossover effects were seen between the environments sampled. If the 1B effects identified in this study are due to 1BL.1RS our data suggests that, where 1BL.1RS has shown beneficial yield effects, interactions not encountered in the experiments described here allowed the conversion of this biomass to grain.

The second yield QTL identified on chromosome 7B was of particular interest to us. We propose that this yield QTL was caused by a very stably expressed GW QTL which is not coincident with any reduction in GN. This describes the type of effect that would allow the development of large grain varieties like Weebill, and a positive deviation from GW and GN trade off. Although QTL analysis for this deviation was undertaken no significant effects were identified. This may be because this trait is mathematically derived from directly measured traits for which compounded variances cause a loss of QTL detection power as described previously [19]. From analysis of single trait QTL, we can state that the substitution effect of the Weebill allele at the 7B locus amounts to a mean increase in GW of 3.4 mg. In all environments there was no concomitant decrease in GN, and in two of those environments the effect on GW is detected as a yield QTL. This included BA_09, the only environment in which grain size was highly correlated with grain yield.

The nature of the 7B grain size QTL allows us to speculate that it may contributes to yield stability by providing lines with a wider repertoire of outlets for yield potential in environments where GW is important, but not carrying a penalty where it is less so. This is supported by AMMI2 analysis showing that lines carrying Weebill alleles at this locus do display increased levels of yield stability compared to those carrying Bacanora alleles. It appears that it is not simply the case that there is a developmental and morphological limit to grain number after which grain size comes into play. The highest GN occurred in Valdivia, where the 7B QTL was not detected as a yield effect. The ability to manipulate grain size independently of number provides strategies to reduce yield losses associated with stress during the rapid spike growth phase [20] as increased grain size is the only route to some recovery in yield potential after losses during this phase.

In spite of numerous studies reporting the location of grain size QTL in bread wheat [2127] there are no reports of any grain yield QTL in which the increasing yield component is grain size associated with the region of 7B reported here. The multiple environment trials and QTL analysis described here shows that the effect is very stably expressed. Weebill alleles at the 7B locus also increase spike length. Previous selection experiments for GW showed this as a general relationship [28].

This study sheds some light on how the grain size QTL described influence the physiological determinants of grain weight, and why the Weebill allele of the 7B QTL influences grain size relatively independently of grain number. Variation on grain size can be achieved through traits expressed before and after anthesis [29]. In the present work the variation in grain size was associated with changes in the rate of grain filling. The two environments in which the 7B locus is detected as a yield effect are BA_09 and Ob_07. It is for BA_09 that we repeat the findings of previous studies {Lopes, 2012 #887} that TGRWT can be become a more important driver of yield in certain environments. It is notable that the lowest rates of PAR were recorded in BA_09, across all growth stages. In spite of this yields in BA_09 were by no means the lowest, ranked fifth out of nine environments. It is possible that post anthesis grain filling compensated for these relatively low light levels that were experienced during pre anthesis grain number determination. Some extra weight is added to this suggestion by the observation that in also Ob_07 the PAR levels are relatively low, out of the seven environments where PAR was measured: third lowest at LSP, second lowest at both SEP and GFP. It is possible that the yield QTL is being expressed in these environments because it allows the crop to compensate for low GN during grain filling.

Future work will facilitate the detailed physiological and developmental analysis of this effect as well as the genetic dissection of the locus to identify the gene/s underlying the QTL. To this end Near Isogenic Lines for the 7B QTL are now being developed.

Materials and Methods

Weebill x Bacanora DH recombinant population

The Weebill x Bacanora (WxB) population comprises 105 recombinant doubled haploid lines derived from F1 using the maize cross method [30]. The parents are RhtB1b semi-dwarfs and carry the photoperiod insensitive Ppd-D1a allele of Ppd-D1. Bacanora also carries the 1BL.1RS rye translocation. For Weebill, spring habit is conferred by Vrn-B1a. The genetic basis of spring habit in Bacanora is not known.

Environments

Locations and years in which the WxB population, parental lines were grown, and experimental designs are shown in Table C in S1 File. Climatic factors for these environments are described in Table A in S1 File and more detail of specific sites can be found in [11]. Best local agronomic practice was applied in each environment and year. In the UK (CF_10) and Chilean (Va_08 and Va_09) trials a complete randomised block was used, with three replicates. In Buenos Aires the trial was completely randomised with three replicates. In Mexico (Ob_07, Ob_08, Ob_09, and Ob_10 and alpha lattice with two replicates. Plot areas were: UK, 6m2; Mexico, 2m2, Chile 1m2, and Argentina 2m2. Seed density between 200–350 per m2 depending best local agronomic practice.

Traits

The way in which raw phenotypic data was collected and physiological traits derived is now described. Ear emergence (EM) was recorded as the date upon half of the length of the ear is extended beyond the flag leaf ligule for half of all the stems in a plot. Days to ear emergence (DTEM) is the number of days between sowing date and EM. This is the same as GS55 on the Zadoks scale [31]. Maturity (MA) is the date on which the peduncle is fully senesced so that the ear no longer has access to water and nutrients from the stem. Days to maturity (DTMA) is the number of days between sowing and MA. This is the same as Zadoks GS 87. Ear biomass (EARBM) was measured as the mass of intact wheat ears detached from the stem at the collar. Ear biomass per square meter is the sum of EARBM collected from a one square metre quadrat or in some cases samples from a set row length which is multiplied to represent 1m2. Ear number per square meter (EARNBpsqm) is the number of those ears. Ear length (EARLG) is the length of the ear from the collar to the tip of the terminal spikelet, not including awns. Thousand grain weight (TGRWT) is the weight of 1000 wheat grains. Grain filling rate (GFR) was determined by dividing TGRWT the number of days from anthesis to maturity. Grain weight per spikelet was determined by removing grains from individual spikelets from a sample of twenty wheat ears and weighing the grain. Grain per spikelet (GRpSPT) was estimated by counting the number of grain set within each spikelet from the same sample as EARBM. Spike number per square meter (SPNBpsqm) was determined by counting spikes within a 1m2 quadrat or from a row within a plot of defined length. Grain per square metre (GRpsqm) was determined in two ways; by multiplying SPNBpsqm by the number of grains per spike; and by dividing grain yield per square metre by mean grain weight. Grain yield (GRYLD) refers to whole plot yield taken using plot combined harvesters, adjusted for moisture content, and divided by plot size to give grain yield per square metre. Plant biomass (PLBM) is the weight per square metre of all above ground crop ate maturity. Harvest Index (HI) is the proportion of PLBM that is grain. Spike biomass (SPBM) was calculated by weighing twenty detached spikes from a quadrat or defined row length at maturity. We arrived at Spikelet number per ear (SPTNBpEAR) by counting spikelets on the sample of twenty ears per plot. The non-seed bearing spikelets were also counted (sSPTNBpEAR). Tiller number per square metre (TINBpsqm) was based on quadrat or defined row length samples. Tiller biomass (TIBM) was arrived at by dividing PLBM by TINBpsqm.

Genetic map construction

A framework genetic map was primarily developed using publically available Single Sequence Repeat (SSR) markers as anchors integrated with data from Diversity Arrays Technology Genome Profiling (DArT) by Triticarte. DNA of the population was sent to Triticarte Pty Ltd, Australia for analysis (http://www.triticarte.com.au/). SSR primer sets were used from JIC (psp), IPK Gatersleben (gwm/gdm), Wheat Microsatellite Consortium (wmc), Beltsville Agricultural Research Station (barc) and INRA (cfd/cfa) (for more information see GrainGenes website, http://www.wheat.pw.usda.gov/). SSR DNA fragments were amplified with PCR, run on 6% polyacrylamide gels for separation, and visualised using silver staining. SSR markers were used to orientate linkage groups using published Consensus maps (Somers et al. 2004) our aim being a density of one marker every 10 cM. In 2012, to further improve map coverage and take advantage of SNP marker technologies, publically available markers developed by the University of Bristol were added to the map using KASP (Competitive Allele-Specific polymerase chain reaction assay) developed by LGC Genomics. All primer information and protocols for the high throughput Genotyping Procedure can be found at CerealsDB (http://www.cerealsdb.uk.net/cerealgenomics/CerealsDB/kasp_mapped_snps.php).

Joinmap v3.0 was used for genetic linkage map construction, set at the default settings with the Kosambi mapping function. Linkage groups were selected at a minimum LOD of 3 for reliable associations. There were 322 polymorphic markers (97 SSRs, 152 DArT, 65 KASP, and eight conserved orthologous set markers) 271 formed linkage groups and 51 remained unlinked giving a total genetic map length of 599 cM.

Statistical analysis

Analyses of variance (ANOVA) and phenotypic correlations were calculated using the R statistical package [32].

QTL analysis of phenotypic traits was performed using the R/QTL [33] module and the R software suite (vs 2.15.1, R core Team, 2012). QTLs were identified initially by simple interval mapping using both, multiple imputation (imp) and Haley-Knott (hk) algorithm. Genome-wide LOD significance thresholds were calculated by permutation test (1000 repetitions). The significance of QTLs was further tested by fitting a multi-QTL model (fitqtl) by multiple interval mapping and dropping one QTL at a time. Confidence intervals were calculated as 1.5-LOD support intervals (lodint), as intervals in which the LOD score is within 1.5 units of its maximum. Effects with negative signs indicate that the increasing allele is from Weebill, a positive sign designates Bacanora. The variance explained values were estimated from the multi-QTL model.

Genotype x Environment interactions were calculated using the Additive Main effect Multiplicative Interaction method (AMMI) using the R statistical package (R Development Core Team 2008). In this analysis, genotypes displaying the highest levels of phenotypic stability (in this case grain yield) lie closest to the centre of AMMI2 plots. The effect- of individual QTL on yield stability was assessed in the following way:

The distance from the central point of AMMI2 plots for lines carrying a particular allele were summed together.

This process was then repeated for 1000 permutations of randomly selected subsets of the same number of lines.

The effect of the QTL on yield stability was deemed to be significant if the distance from step 1 occurred below the 5% level in step 2.

Supporting Information

S1 File. Climatic conditions, full QTL table, growing environments, and additional data for height and heading data.

https://doi.org/10.1371/journal.pone.0118847.s001

(DOCX)

Author Contributions

Conceived and designed the experiments: SG DM DC MR J. Snape. Performed the experiments: JP GG AH JBA MLW J. Simmonds. Analyzed the data: SG LW. Contributed reagents/materials/analysis tools: SG. Wrote the paper: SG.

References

  1. 1. Sadras VO. Evolutionary aspects of the trade-off between seed size and number in crops. Field Crops Research 2007;100: 125–138.
  2. 2. Foulkes MJ, Slafer GA, Davies WJ, Berry PM, Sylvester-Bradley R, et al. Raising yield potential of wheat. III. Optimizing partitioning to grain while maintaining lodging resistance. Journal of Experimental Botany 2011;62: 469–486. pmid:20952627
  3. 3. Parry MAJ, Reynolds M, Salvucci ME, Raines C, Andralojc PJ, et al. Raising yield potential of wheat. II. Increasing photosynthetic capacity and efficiency. Journal of Experimental Botany 2011;62: 453–467. pmid:21030385
  4. 4. Reynolds M, Bonnett D, Chapman SC, Furbank RT, Manes Y, et al. Raising yield potential of wheat. I. Overview of a consortium approach and breeding strategies. Journal of Experimental Botany 2011;62: 439–452. pmid:20952629
  5. 5. Fischer RA. The importance of grain or kernel number in wheat: A reply to Sinclair and Jamieson. Field Crops Research 2008;105: 15–21.
  6. 6. Sayre KD, Rajaram S, Fischer RA. Yield potential progress in short bread wheats in northwest Mexico. Crop Science 1997;37: 36–42.
  7. 7. Marshall DR, Mares DJ, Moss HJ, Ellison FW. Effects of grain shape and size on milling yields in wheat. 2. experimental studies. Australian Journal of Agricultural Research 1986;37: 331–342.
  8. 8. Grieve CM, Francois LE. The importance of initial seed size in wheat plant-response to salinity. Plant and Soil 1992;147: 197–205.
  9. 9. Lopes MS, Reynolds MP, Jalal-Kamali MR, Moussa M, Feltaous Y, et al. The yield correlations of selectable physiological traits in a population of advanced spring wheat lines grown in warm and drought environments. Field Crops Research 2012;128: 129–136.
  10. 10. Bustos DV, Hasan AK, Reynolds MP, Calderini DF. Combining high grain number and weight through a DH-population to improve grain yield potential of wheat in high-yielding environments. Field Crops Research 2013;145: 106–115.
  11. 11. Garcia GA, Hasan AK, Puhl LE, Reynolds MP, Calderini DF, et al. Grain yield potential strategies in an elite wheat double-haploid population grown in contrasting environments. Crop Science 2013;53: 2577–2587.
  12. 12. Gollob HF. A statistical model which combines features of factor analytic and analysis of variance techniques. Psychometrika 1968;33: 73-&. pmid:5239571
  13. 13. Gauch HG, Piepho HP, Annicchiarico P. Statistical analysis of yield trials by AMMI and GGE: Further considerations. Crop Science 2008;48: 866–889.
  14. 14. Zhao CH, Cui F, Wang XQ, Shan SC, Li XF, et al. Effects of 1BL/1RS translocation in wheat on agronomic performance and quality characteristics. Field Crops Research 2012;127: 79–84.
  15. 15. Peake AS, Gilmour A, Cooper M. The 1BL/1RS translocation decreases grain yield of spring wheat germplasm in low yield environments of north-eastern Australia. Crop & Pasture Science 2011;62: 276–288.
  16. 16. Xiao YG, He SM, Yan J, Zhang Y, Zhang YL, et al. Molecular mapping of quantitative trait loci for kernel morphology traits in a non-1BL.1RS x 1BL.1RS wheat cross. Crop & Pasture Science 2011;62: 625–638.
  17. 17. Singh R, Tiwari R, Priyamvada , Gupta RK, Shoran J, et al. 1RS.1BL Translocation and Grain Yield as well as Bread Loaf Volume in Indian Wheats. Cereal Research Communications 2009;37: 441–448.
  18. 18. Monneveux P, Reynolds MP, Zaharieva M, Mujeeb-Kazi A. Effect of T1BL.1RS chromosome translocation on bread wheat grain yield and physiological related traits in a warm environment. Cereal Research Communications 2003;31: 371–378.
  19. 19. Wang Y, Li H, Zhang L, Lu W, Wang J. On the use of mathematically-derived traits in QTL mapping. Molecular Breeding 2012;29: 661–673.
  20. 20. Fischer RA. Number of kernels in wheat crops and the influence of solar-radiation and temperature. Journal of Agricultural Science 1985;105: 447–461.
  21. 21. Gegas VC, Nazari A, Griffiths S, Simmonds J, Fish L, et al. A Genetic Framework for Grain Size and Shape Variation in Wheat. Plant Cell 2010;22: 1046–1056. pmid:20363770
  22. 22. Ammiraju JSS, Dholakia BB, Santra DK, Singh H, Lagu MD, et al. Identification of inter simple sequence repeat (ISSR) markers associated with seed size in wheat. Theoretical and Applied Genetics 2001;102: 726–732.
  23. 23. Kuchel H, Williams KJ, Langridge P, Eagles HA, Jefferies SP. Genetic dissection of grain yield in bread wheat. I. QTL analysis. Theoretical and Applied Genetics 2007;115: 1029–1041. pmid:17713755
  24. 24. Breseghello F, Sorrells ME. QTL analysis of kernel size and shape in two hexaploid wheat mapping populations. Field Crops Research 2007;101: 172–179.
  25. 25. Tsilo TJ, Hareland GA, Simsek S, Chao SM, Anderson JA. Genome mapping of kernel characteristics in hard red spring wheat breeding lines. Theoretical and Applied Genetics 2010;121: 717–730. pmid:20425103
  26. 26. Roeder MIS, Huang XQ, Boerner A. Fine mapping of the region on wheat chromosome 7D controlling grain weight. Functional & Integrative Genomics 2008;8: 79–86.
  27. 27. Wu XS, Chang XP, Jing RL. Genetic Insight into Yield-Associated Traits of Wheat Grown in Multiple Rain-Fed Environments. Plos One 2012;7.
  28. 28. Wiersma JJ, Busch RH, Fulcher GG, Hareland GA. Recurrent selection for kernel weight in spring wheat. Crop Science 2001;41: 999–1005. pmid:11555282
  29. 29. Calderini DF, Savin R, Abeledo LG, Reynolds MP, Slafer GA. The importance of the period immediately preceding anthesis for grain weight determination in wheat. Euphytica 2001;119: 199–204.
  30. 30. Laurie DA, Bennett MD. The production of haploid wheat plants from wheat x maize crosses. Theoretical and Applied Genetics 1988;76: 393–397. pmid:24232203
  31. 31. Zadoks JC, Chang TT, Konzak CF. Decimal code for growth stages of cereals. Weed Research 1974;14: 415–421.
  32. 32. RDevelopmentCoreTeam R: A language and environment for statistical computing. Vienna: R Foundation for Statistical Computing. 2008
  33. 33. Broman KW, Wu H, Sen S, Churchill GA. R/qtl: QTL mapping in experimental crosses. Bioinformatics 2003;19: 889–890. pmid:12724300