Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Robust colour constancy in red-green dichromats

  • Leticia Álvaro ,

    Roles Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Validation, Visualization, Writing – original draft, Writing – review & editing

    lalvaro@ucm.es

    Affiliations Anglia Vision Research, Department of Vision and Hearing Sciences, Anglia Ruskin University, Cambridge, United Kingdom, Facultad de Psicología, Universidad Complutense de Madrid, Pozuelo de Alarcón, España

  • João M. M. Linhares,

    Roles Data curation, Methodology, Software, Writing – review & editing

    Affiliation Centre of Physics, University of Minho, Braga, Portugal

  • Humberto Moreira,

    Roles Conceptualization, Formal analysis, Funding acquisition, Writing – review & editing

    Affiliation Facultad de Psicología, Universidad Complutense de Madrid, Pozuelo de Alarcón, España

  • Julio Lillo,

    Roles Conceptualization, Funding acquisition, Resources, Writing – review & editing

    Affiliation Facultad de Psicología, Universidad Complutense de Madrid, Pozuelo de Alarcón, España

  • Sérgio M. C. Nascimento

    Roles Conceptualization, Data curation, Formal analysis, Funding acquisition, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, Writing – review & editing

    Affiliation Centre of Physics, University of Minho, Braga, Portugal

Abstract

Colour discrimination has been widely studied in red-green (R-G) dichromats but the extent to which their colour constancy is affected remains unclear. This work estimated the extent of colour constancy for four normal trichromatic observers and seven R-G dichromats when viewing natural scenes under simulated daylight illuminants. Hyperspectral imaging data from natural scenes were used to generate the stimuli on a calibrated CRT display. In experiment 1, observers viewed a reference scene illuminated by daylight with a correlated colour temperature (CCT) of 6700K; observers then viewed sequentially two versions of the same scene, one illuminated by either a higher or lower CCT (condition 1, pure CCT change with constant luminance) or a higher or lower average luminance (condition 2, pure luminance change with a constant CCT). The observers’ task was to identify the version of the scene that looked different from the reference scene. Thresholds for detecting a pure CCT change or a pure luminance change were estimated, and it was found that those for R-G dichromats were marginally higher than for normal trichromats regarding CCT. In experiment 2, observers viewed sequentially a reference scene and a comparison scene with a CCT change or a luminance change above threshold for each observer. The observers’ task was to identify whether or not the change was an intensity change. No significant differences were found between the responses of normal trichromats and dichromats. These data suggest robust colour constancy mechanisms along daylight locus in R-G dichromacy.

Introduction

Normal trichromatic colour vision is colour constant, i.e., has the ability to partially discount the effects of the colour of the illumination on the perception of the surface colours of objects. The phenomenon of colour constancy has been extensively studied in normal colour vision [1] but has been little studied in defective colour vision, in particular in dichromacy, where the absence of one cone photopigment class severely impairs colour discrimination [2].

The most common form of dichromacy is red-green (R-G) dichromacy which is a genetically determined abnormality of the retinal pigments sensitive to medium (M pigment) or long (L pigment) wavelengths, affecting around 2% of males and 0.02% of females [2]. R-G dichromats are classified as protanopes or deuteranopes. Protanopia is caused by the substitution of L-photopigment by M-photopigment in the L-cones; deuteranopia is caused by the substitution of M-photopigment by L-photopigment in the M-cones [3], and in some rare cases either may be caused by photoreceptor loss [4]. Consequently, for practical purposes R-G dichromats only have two types of functional cones: in addition to S-cones, protanopes have operative M-cones whereas deuteranopes have operative L-cones. Given the absence of one of the pigments, colour discrimination in R-G dichromats is impaired along the R-G confusion lines [5] resulting in the perception of only a small gamut of the colours normal observers can perceive [6,7]. The famous description by John Dalton (a deuteranope himself [8]) of the pink flowers of a cranesbill, which appeared to him sky-blue by daylight but near yellow by candlelight [9], suggests that colour constancy may also be impaired in dichromacy.

In normal colour vision colour constancy has been experimentally accessed in diverse ways (for a detailed review, see Foster [1]): by asymmetric colour matching, colour naming, achromatic adjustment and by the performance in tasks requiring discrimination of illuminant changes from surface-reflectance changes. In dichromatic colour vision, however, studies have mainly used discrimination of illuminant changes from surface-reflectance changes and both achromatic matches and asymmetric paper matches. In the former, R-G dichromats showed less constancy than normal controls with Munsell samples [10,11] but almost normal constancy with natural scenes [11]. In experiments using achromatic matching, similar colour constancy was found for normal observers and R-G dichromats in the three axes tested [R-G cardinal axis, yellow-blue (Y-B) cardinal axis and Planckian locus] despite the R-G dichromats’ poorer colour discrimination in the R-G axis [12]. In experiments based on paper matches, a similar degree of adaptation to the illuminant was found for normal and R-G dichromats [13]. Together, this research suggests that colour constancy is, at least for natural surfaces and natural illuminants (and contrary to what could be inferred from John Dalton’s description of the colour of cranesbills), as efficient in dichromacy as in normal trichromacy. None of these studies, however, tested colour constancy with real natural images and global illuminant changes.

The aim of the work reported here was to test colour constancy in dichromacy with natural images and natural illuminants. Spectral reflectance data from natural images were obtained by hyperspectral imaging and used to build the stimuli. The experiments were based on an experimental paradigm reported recently [14,15] which estimates thresholds to perceive changes in a scene due to global illuminant changes. This experimental methodology is particularly well suited to test colour constancy on natural viewing conditions as it measures the sensitivity to detect chromatic changes in a complex natural image.

Methods

Stimuli

Images of the scenes used in this study were rendered using hyperspectral imaging of natural scenes. The spectral range used was from 400 to 720 nm, with a spectral resolution of 10 nm. Two scenes of rural and two scenes of urban environments (as depicted in Fig 1) were selected from an existing database [16]. The images were presented on a CRT colour display, subtended an angle of 10° in the horizontal axis and were observed at 60 cm. Images were trimmed about 70 pixels from their original resolution to delete the reflectance standard reference from the scene and to match them in resolution. Images were also subsampled every other pixel from the original resolution of 1270x1017 pixels, so the image rendering system was able to cope with the images’ digital size. To simulate the effect of different illuminants on the images, the reflectance spectrum of each pixel of the scenes was multiplied by each illuminant spectrum. Illuminants were simulations of daylight of variable correlated colour temperature (CCT) synthetized from Judd’s daylight spectral basis functions [17].

thumbnail
Fig 1. Images of the scenes used as stimuli rendered under the standard illuminant D67.

The images were retrieved from a database of images with hyperspectral data of natural scenes [16] which can be freely accessed and used from: http://online.uminho.pt/pessoas/smcn/hsi_2004/hsi_2004.html.

https://doi.org/10.1371/journal.pone.0180310.g001

There were two experimental conditions applied. In condition 1 the colour of the simulated illumination was changed. Each scene was rendered assuming an illuminant with a CCT in the range 4012–41231 K (249.25–24.25 MK-1) in 10 steps, equally spaced by 25 MK-1 (see Fig 2; where yellowish illuminants are represented by yellow triangles and bluish illuminants are represented by blue triangles). The CCT was spaced in reciprocal colour temperature (MK-1) to ensure visual uniformity [5]. The average luminance was kept constant at 10 cd/m2. In condition 2 the intensity of the simulated illumination was changed. Each scene was rendered with a constant CCT of 6700 K (149.25 MK-1, selected as the neutral point of the CCT testing interval) and the average luminance was adjusted in the range of 6–15 cd/m2 in 10 steps equally spaced by 1 cd/m2. For all conditions and scenes tested at least ≈90% of the pixels above 10 cd/m2 were inside the screen colour gamut or the displayed colour was deviated less than 2 JND (ΔE*ab ≤ 2.3) from the intended colour. The ΔE*ab = 2.3 value was around the threshold of chromatic discrimination for complex coloured images [18,19].

thumbnail
Fig 2. Daylight illuminants used in condition 1.

In this condition only the colour of the illumination changed. The reference illuminant was always D67 (grey triangle). Each scene was rendered with a CCT in the range 4012–41231 K (249.25–24.25 MK-1; yellowish illuminants are represented by yellow triangles; bluish illuminants are represented by blue triangles), in steps of 25 MK-1.

https://doi.org/10.1371/journal.pone.0180310.g002

Apparatus

The images of the scenes were displayed on a Sony–GDM F520 (Sony Corporation, Tokyo, Japan) controlled by a video card (ViSaGe Visual Stimulus Generator; Cambridge Research Systems, Rochester, Kent, UK) in 24-bits-per-pixel true-colour mode. The screen was calibrated in colour and luminance with a telespectroradiometer (PR-650 SpectraScan Colorimeter; Photo Research, Chatsworth, CA). A CB6 response box (Cambridge Research Systems, Rochester, Kent, UK) was used to register the observer’s responses.

General procedure

The procedure was similar to that used by Pearce et al. [14] and Radonjić et al. [15] in a study with normal observers and real illuminants. The experiments were performed inside a dark room. At the beginning of each session, the observers viewed a uniform grey background with a CCT of 6700 K and a luminance of 10 cd/m2 for 5 minutes.

Experiment 1: Thresholds for detecting a change

First experiment (a two-alternative forced-choice task) measured thresholds for detecting a change in the colour or in the intensity of the illuminant. Each observer performed 800 trials in one session: 4 scenes x 10 levels in each condition x 2 conditions (CCT or luminance change) x 10 repetitions. There were three automatic breaks every 200 trials (≈ 20 minutes). During the breaks the grey adaptation background was presented. All the trials had the same structure (see Fig 3). After a short presentation of a black background (400 ms), the reference image (6700 K and 10 cd/m2) appeared for 2 s. This was followed by another short presentation of the background (400 ms) and then the first comparison scene for 1 s. After another short presentation of the background (400 ms), the second comparison scene was presented for 1 s. Finally, a black background was presented until a response was made (6.5 s maximum). One of the comparison scenes was identical to the reference scene, i.e., with the same illumination; in the other either the CCT or the average luminance was different (see average luminance change of the second comparison image in Fig 3). The observers had simply to identify which of the two comparison scenes looked different from the reference scene.

thumbnail
Fig 3. Stimuli sequence of an example trial.

The reference image was always simulated rendered by D67. In condition 1 the CCT of the illumination changed in one of the intervals; in condition 2 the intensity of the illumination changed in one of the intervals. The observer’s task was to identify which of the intervals was different from the reference. Here a luminance change in the second image presentation is illustrated.

https://doi.org/10.1371/journal.pone.0180310.g003

Experiment 2: Identification of the type of perceived changes

Second experiment (a two-alternative forced-choice task) identified how the changes are perceived by different types of observers. Each observer performed 160 trials: 4 scenes x 2 conditions (CCT or luminance change) x 2 supra-threshold levels in each condition (change towards higher or lower CCT/luminance) x 10 repetitions. All the trials had the same structure. After a short presentation of a black background (400 ms), the reference image (6700 K and 10 cd/m2) appeared for 2 s. It was followed by another short presentation of background (400 ms) and a comparison scene for 1 s. Finally, a black background was presented until a response was made (6.5 s maximum). The average illumination of the comparison scene was different from the illumination in the reference scene, but it presented either a pure CCT change or a pure luminance change. The extent of the CCT/luminance change was adapted for each observer/scene individually, using the threshold results from experiment 1. It was a supra-threshold change two steps above the 75% threshold computed from experiment 1, assuming the 10 levels in both conditions as described before. The observers were required to specify whether or not the change was only in intensity. Observers verbally informed the experimenter that they understood the task.

Discrimination thresholds task.

A discrimination task [20] was used to estimate colour discrimination thresholds loci using a staircase procedure. Each observer was tested with 500 trials: 25 trials x 20 hues. Each trial presented a square chromatic target on an achromatic static luminance noise background. Observers were required to indicate the location of the square (right or left). Discrimination thresholds for each hue were measured on three occasions and averaged for each observer.

Design

Experiment 1: Thresholds for detecting a change.

A two-alternative forced-choice task measured discrimination thresholds (the dependent variable) in a 3x2x2x4 mixed-measures design. The independent variable group of observers (normal trichromats, protanopes and deuteranopes) was the between-subjects factor and the independent variables type of illumination change (CCT or luminance), change direction (higher or lower) and scene (four scenes, see Fig 1) were within-subject factors.

Experiment 2: Identification of the type of perceived changes.

A two-alternative forced-choice task measured hit rate (the dependent variable) in the same 3x2x2x4 mixed-measures design as described for experiment 1.

Observers

Eleven observers (4 colour normal, age range 25–36 y; 3 protanopes, age range 22–51 y; 4 deuteranopes, age range 22–47 y) participated in the experiments. A one-way ANOVA analysis showed no significant group differences in age (mean age: colour normal = 30.00 y, SD = 4.69; protanopes = 32.33 y, SD = 16.20; deuteranopes = 35.00 y, SD = 10.86), F(2,8) = 0.21, p = 0.81. All but two of the authors (LA and JML) were naïve to the experiments’ purposes. Each observer had normal or corrected-to-normal acuity and their colour vision was tested with Ishihara plates [21], the Farnsworth-Munsell 100 hue colour vision test [22], the Cambridge Colour Test [23], the Color Assessment & Diagnosis (CAD) test [24], an in-house adaptation [20] of the Universal Colour Discrimination Test (UCDT [25]) and performed Rayleigh match in an Oculus HMC anomaloscope ([26], see S1 Table for detailed results on colour vision tests). Observers were reimbursed for their participation in the study. The experiment was conducted in accordance with the Declaration of Helsinki and was granted ethical approval by the Ethics Committee of the University of Minho (Process SECVS 029/2014). Observers were asked to give written consent before participating in the study, and were informed of their right to withdraw at any time without penalty.

Results

Experiment 1

A psychometric function was fitted to the data to extract thresholds using a criterion of 75% towards higher or lower CCT or luminance (see Fig 4). The function was fitted on a non-parametric approach which made no assumption about the shape of the true function underlying the experimental data except its smoothness [27].

thumbnail
Fig 4. Examples of psychometric functions.

Thresholds were computed based on a 75% criterion (dashed line) and extracted from fitted psychometric functions (solid line). Provided examples represent data from a protanope observer for a change towards higher CCT for scene 4 (Fig 4A) and a normal observer for a change towards lower luminance for scene 2 (Fig 4B).

https://doi.org/10.1371/journal.pone.0180310.g004

Thresholds detecting changes on CCT.

Fig 5 shows the mean thresholds for the two conditions of experiment 1 for changes towards higher (yellow or light grey bars) or lower (blue or dark grey bars) CCT or luminance for the four scenes for normal observers (N), protanopes (P) or deuteranopes (D). Bar colours exhibit the type of illuminant change represented by the thresholds: yellow bars for changes towards yellowish illuminants (lower CCT); blue bars for changes towards bluish illuminants (higher CCT); light grey bars for changes towards brighter illuminants; dark grey bars for changes towards dimmer illuminants. For simplicity, Fig 6 shows similar data to Fig 5 but which are averaged across scenes and observers for normal observers (N), protanopes (P) or deuteranopes (D).

thumbnail
Fig 5. Thresholds for the four scenes in experiment 1.

Mean reciprocal CCT (in MK-1, Fig 5A) or luminance (in cd/m2, Fig 5B) thresholds towards higher (yellow bars in 5A; light grey bars in 5B) or lower (blue bars in 5A; dark grey bars in 5B) values in relation to the reference scene (149.25 MK-1 and 10 cd/m2) for normal observers (N), protanopes (P) or deuteranopes (D) for the four scenes (see x-axis). Error bars show standard error of the mean (SEM). The lack of an error bar in some conditions/groups is due to lack of variability in the data.

https://doi.org/10.1371/journal.pone.0180310.g005

thumbnail
Fig 6. Thresholds for experiment 1 averaged across scenes.

Mean reciprocal CCT (in MK-1, Fig 6A) or luminance (in cd/m2, Fig 6B) thresholds towards higher (yellow bars in 6A; light grey bars in 6B) or lower (blue bars in 6A; dark grey bars in 6B) values in relation with the reference scene (149.25 MK-1 and 10 cd/m2) for normal observers (N), protanopes (P) or deuteranopes (D) averaged across scenes. Error bars show SEM.

https://doi.org/10.1371/journal.pone.0180310.g006

A mixed-model ANOVA analysis was conducted with group (normal observers, protanopes and deuteranopes) as the between-subjects factor, and change direction (higher or lower) and scene (scene 1, 2, 3 4) as within-subject factors on the estimated thresholds for CCT changes in relation to the reference scene (149.25 MK-1, see Fig 5A; Normality of variables was confirmed by Kolmogorov-Smirnov tests, all p>.05). This analysis did not show any significant effect of change direction, scene, group or their interactions (all p>.05). In order to increase statistical power, the same analyses were repeated but combining both dichromat groups (between-subjects factor with two levels: normal and dichromat). This analysis did reveal a significant effect of group [two levels, F(1,9) = 6.90, p < .05, η2 = .43, higher thresholds for dichromats (38.60 MK-1) in relation to normal observers (28.13 MK-1)] but not significant effects of change direction, scene, or their interactions (all p>.05).

Thresholds detecting changes in intensity.

A mixed-model ANOVA analysis was conducted with group (normal observers, protanopes and deuteranopes) as the between-subjects factor, and change direction (higher or lower) and scene (scene 1, 2, 3 4) as within-subject factors on the estimated thresholds for luminance changes in relation to the reference scene (10 cd/m2, see Fig 5B). This analysis did not show any significant effect of change direction, scene, group or their interactions (all p>.05) except for an effect of the interaction of change direction and scene [F(3,24) = 4.13, p < .05, η2 = .34]. Bonferroni-corrected pairwise comparisons showed significant differences only on scene 2 towards higher thresholds for the lighter (3.82 cd/m2) than for the darker (2.55 cd/m2) direction. In order to increase statistical power, the same analyses were repeated but combining both dichromat groups (between-subjects factor with two levels: normal and dichromat) but there were no significant effect of change direction, scene, group or their interactions (all p>.05) except for the same effect of the interaction of change direction and scene [F(3,27) = 5.28, p < .04, η2 = .37] (Bonferroni-corrected pairwise comparisons showed significant differences only on scene 2 towards higher thresholds for the lighter direction).

Comparison between colour and illuminant discrimination thresholds.

Fig 7 compares CCT discrimination thresholds from the current experiment with those from Pearce et al. (see Fig 2C in [14]) in CIELUV colour space (u* and v* units were used to allow a direct comparison). The results are similar for normal observers in both experiments and also between different types of observers in the current experiment, especially for yellowish illuminants. The small differences may result from different sampling of the background colours [14,15].

thumbnail
Fig 7. Mean thresholds for illuminants along daylight locus, plotted in CIE u*v* coordinates.

Reference white corresponds to D67 illuminant (u* = 0, v* = 0, grey triangle). Data for normal observers in Pearce et al. ([14], open circles) in comparison with normal observers (solid circles), protanopes (squares) and deuteranopes (diamonds) in this study. Yellowish illuminants are represented as yellow symbols; bluish illuminants are represented as blue symbols.

https://doi.org/10.1371/journal.pone.0180310.g007

Fig 8 shows the mean thresholds transformed to ΔE*uv units for the CCT condition (values from Fig 6A) of experiment 1 for the two illumination change directions (towards yellowish illuminants, yellow circles; towards bluish illuminants, blue circles) in relation with the reference illuminant (, = 0.1968; = 0.4663) for normal observers (N), protanopes (P) or deuteranopes (D). Fig 8 also represents the colour discrimination thresholds along daylight locus (yellow/blue dashes). These discrimination thresholds loci were estimated from the discrimination ellipses obtained using an in-house adaptation [20] of the UCDT [25]. The two intersections (bluish/yellowish illuminants) between the individual’s discrimination ellipse and the corresponding illuminant segment of the line represented in Fig 2 were calculated. These values are the estimations of the colour discrimination thresholds along daylight locus in Fig 8 (blue/yellow dashes).

thumbnail
Fig 8. Mean illuminant discrimination and mean colour discrimination thresholds along daylight locus.

Circles correspond to thresholds in ΔE*uv for illuminants along daylight locus for the two illumination change directions of the CCT condition (towards yellowish illuminants, yellow circles; towards bluish illuminants, blue circles) of experiment 1 in relation with the reference illuminant (, = 0.1968; = 0.4663; Y = 10 cd/m2). Dashes correspond to the colour discrimination thresholds along daylight locus in ΔE*uv for the two illumination directions in Fig 2 (yellowish illuminants, yellow dashes; bluish illuminants, blue dashes) in relation with the reference white (, = 0.1947; = 0.4639; Y = 11 cd/m2). Mean thresholds correspond to normal observers (N), protanopes (P) or deuteranopes (D, see x-axis). Error bars show SEM.

https://doi.org/10.1371/journal.pone.0180310.g008

A mixed-model ANOVA analysis was conducted with group (normal observers, protanopes and deuteranopes) as the between-subjects factor and discrimination type (illuminant or chromatic discrimination, circles and dashes in Fig 8) and direction (yellowish or bluish) as within-subject factors on the estimated ΔE*uv thresholds. This analysis revealed a significant main effect of discrimination type [F(1,8) = 201.67, p < .001, η2 = .96; lower thresholds for chromatic discrimination (ΔE*uv = 6.38) in relation to illuminant discrimination (ΔE*uv = 24.26)], of direction [F(1,8) = 8.40, p < .05, η2 = .51; higher discrimination thresholds towards bluish direction (ΔE*uv = 17.37) in relation to yellowish direction (ΔE*uv = 13.26)] and of group of observers [F(2,8) = 4.52, p < .05, η2 = .53; Bonferroni-corrected pairwise comparisons did not show significant differences between the three groups; LSD pairwise comparisons showed higher thresholds for protanopes (ΔE*uv = 17.81) and deuteranopes (ΔE*uv = 16.43) in relation to normal observers (ΔE*uv = 11.72), both p < .05] but no effect of their interactions (all p>.05). There was no significant Pearson correlation between the yellow or bluish illuminant discrimination thresholds and the colour discrimination thresholds for none of the groups of observers either collapsing or not collapsing the two dichromat groups (R2 = 0.01–0.41, all p>.05, see S1 Fig).

Experiment 2

In order to discard that dichromat observers could use their particular intensity perception as a cue to detect the CCT changes, experiment 2 required the observers to identify if the change was a pure luminance change or not.

Fig 9 shows the mean hit rates for the two conditions of illuminant change identification of experiment 2 (reciprocal CCT, Fig 9A; luminance, Fig 9B) towards higher (yellow or light grey bars) or lower (blue or dark grey bars) CCT or luminance in relation to the reference scene (149.25 MK-1 and 10 cd/m2) for the four scenes for normal observers (N), protanopes (P) or deuteranopes (D). For simplicity, Fig 10 shows similar data to Fig 9 but averaged across scenes and observers for normal observers (N), protanopes (P) or deuteranopes (D).

thumbnail
Fig 9. Mean hit rates for the four scenes in experiment 2.

Mean reciprocal CCT (Fig 9A) or luminance (Fig 9B) change identification hit rate towards higher (yellow bars in 9A; light grey bars in 9B) or lower (blue bars in 9A; dark grey bars in 9B) values for normal observers (N), protanopes (P) or deuteranopes (D) for the four scenes (see x-axis). Error bars show SEM. The lack of an error bar in some conditions/groups is due to lack of variability in the data.

https://doi.org/10.1371/journal.pone.0180310.g009

thumbnail
Fig 10. Mean hit rates for experiment 2 averaged across scenes.

Mean reciprocal CCT (Fig 10A) or luminance (Fig 10B) change identification hit rate towards higher (yellow bars in 10A; light grey bars in 10B) or lower (blue bars in 10A; dark grey bars in 10B) values for normal observers (N), protanopes (P) or deuteranopes (D) averaged across scenes. Error bars show SEM.

https://doi.org/10.1371/journal.pone.0180310.g010

A mixed-model ANOVA analysis was conducted with group (normal observers, protanopes and deuteranopes) as the between-subjects factor and type of change (CCT or luminance), change direction (higher or lower) and scene (scene 1, 2, 3 4) as within-subject factors on the hit rates obtained in experiment 2, with the Greenhouse–Geisser correction applied when appropriate. This analysis showed a significant effect of scene [F(3,24) = 3.52, p < .05, η2 = .31], and of the interaction between type of change and direction [F(1,8) = 8.32, p < .05, η2 = .51], but no effect of type of change, change direction, scene, group of observers or any other interaction (all p>.05). Bonferroni-corrected pairwise comparisons did not show significant differences between the four scenes used [LSD pairwise comparisons showed a significantly lower hit rate for scene 2 (.75) in relation to scenes 1 (.85) and 3 (.88), both p < .05] but showed differences between the two change directions only in the CCT condition [higher hit rate for changes towards yellowish illuminants (.92) in relation to bluish illuminants (.73)]. In order to increase statistical power, same analyses were repeated but combining both dichromat groups (between-subjects factor with two levels: normal and dichromat), with the Greenhouse–Geisser correction applied when appropriate. This analysis did not reveal any significant effect of change type, change direction, scene, group or their interactions (all p>.05).

Discussion

The main purpose of this work was to test how normal trichromats and colour deficient observers perceived changes in the colour or the intensity of illuminants on complex images of natural scenes. It was found that R-G dichromats detect natural changes in the colour of the illumination in natural scenes slightly worse than normal trichromats do. The magnitude of the difference between normal trichromats and dichromats was 10.47 MK-1 which is far from the average threshold for normal observers towards bluish (30.54 MK-1) or yellowish direction (25.72 MK-1). Thus illuminant discrimination thresholds of R-G dichromats are comparable to those of normal observers. No differences were found regarding the detection of changes in the intensity of illuminants. Thus R-G dichromats detect natural changes in the intensity of the illumination in natural scenes at the same level as normal trichromats do. The CCT and luminance discrimination thresholds were similar independently of the scenes used, which implies that the type of scene does not impact the final outcome. These results suggest that colour constancy mechanisms are robust for R-G dichromats over the daylight illuminants tested and are comparable to those of normal trichromats, a result supported on the basis of the filtering properties of the dichromatic colour system [28]. Although these constancy levels hold for natural lighting, it is unclear whether they hold for other more artificial lighting such as those tested by Pearce et al. [14].

In the experimental paradigm adaptation may not be complete because the times involved in the presentation of the stimuli are short. Detection of changes could therefore be driven by single surface detection mechanisms and be unrelated to colour constancy. However, thresholds for detecting CCT changes were much larger than thresholds for colour discrimination in the same area of the colour space (both differed in 17.88 ΔE*uv units). Moreover, there was no linear relation between both types of thresholds in any observers’ group. Thus, colour discrimination and illuminant discrimination are unlikely to be related in this task. There has been some debate about the strong colour constancy mechanisms in R-G dichromats arising from the weaker chromatic discrimination in these observers [12]. The dissimilarity of the CCT and the chromatic discrimination thresholds suggests the action of independent mechanisms for colour discrimination and colour constancy both in normal observers and in R-G dichromats.

In experiment 2 it is shown that R-G dichromats also identify the quality of illumination changes, colour or intensity, in the same way as normal trichromats. This rules out the possibility of intensity changes being used as a cue to identify colour changes in our experiments, as suggested in other context by several works as Jameson and Hurvich [29] or Wachtler, Dohrmann and Hertel [30].

The task used in the first experiment was similar to the task previously used by Pearce et al. [14] and Radonjić et al. [15] with normal trichromats. Fig 7 shows high similarity in the mean discrimination accuracy along the yellow-blue line between the normal observers of this study and those of Pearce et al. [14]. Although the task was the same in both studies, the stimuli were quite different. However, the similarity in the overall results suggests that both studies measured the same colour constancy mechanisms in normal observers, again despite the different stimuli.

Colour constancy mechanisms of normal observers both in the current study and in previous research [14,31,32] are optimised for bluish illuminants. This trend also appears for the R-G dichromats included in this study. However, our data do not support the influence of stimulus content in the CCT discrimination thresholds, as has been also previously reported [15]. The absence of a scene effect in the current research may arise from a lack of power due to a limited number of observers. This fact along with the impossibility of capturing a difference between normal trichromats and the two groups of dichromats as separate groups suggest that future research will benefit of a larger number of observers and scenes.

These results confirm previous research [10,11] proposing strong colour constancy mechanisms in R-G dichromats with natural scenes and illuminants along the daylight locus, and also other studies suggesting independency between chromatic discrimination and colour constancy [12,32].

Supporting information

S1 Table. Detailed results for colour vision tests.

https://doi.org/10.1371/journal.pone.0180310.s001

(DOCX)

S1 Fig. Relation between illuminant and colour discrimination thresholds along daylight locus for each group of observers.

Colour discrimination thresholds in ΔE*uv along daylight locus (y-axis) for the two illumination directions in Fig 2 (towards yellowish illuminants, panels A-D; towards bluish illuminants, panels E-H) in relation with the reference white (, = 0.1947; = 0.4639; Y = 11 cd/m2), for normal observers (panels A and E, solid circles), protanopes (panels B and F, squares), deuteranopes (panels C and G, diamonds) and both dichromat groups collapsed (panels D and H, triangles) against illuminant discrimination thresholds in ΔE*uv along daylight locus (x-axis) for the two illumination change directions of the CCT condition (towards yellowish illuminants, panels A-D; towards bluish illuminants, panels E-H) of experiment 1 in relation with the reference illuminant (, = 0.1968; = 0.4663; Y = 10 cd/m2). R2 (all p>.05) and the best-fitting lines derived from linear least-squares regressions are also given.

https://doi.org/10.1371/journal.pone.0180310.s002

(TIF)

S1 Dataset. Thresholds obtained in experiment 1 and on the discrimination task.

https://doi.org/10.1371/journal.pone.0180310.s003

(PDF)

Acknowledgments

We are grateful to Catarina João for her help with data collection.

References

  1. 1. Foster DH (2011) Color constancy. Vision Res 51: 674–700. pmid:20849875
  2. 2. Sharpe LT, Stockman A, Jägle H, Nathans J (1999) Opsin genes, cone photopigments, color vision, and color blindness. In: Gegenfurtner KR, Sharpe LT, editors. Color vision. Cambridge, United Kingdom: Cambridge University Press. pp. 3–51.
  3. 3. Konstantakopoulou E, Rodriguez-Carmona M, Barbur JL (2012) Processing of color signals in female carriers of color vision deficiency. J Vis 12: 11–11.
  4. 4. Carroll J, Neitz M, Hofer H, Neitz J, Williams DR (2004) Functional photoreceptor loss revealed with adaptive optics: An alternate cause of color blindness. Proceedings of the National Academy of Sciences of the United States of America 101: 8461–8466. pmid:15148406
  5. 5. Wyszecki G, Stiles WS (1982) Color Science: Concepts and Methods, Quantitative Data and Formulae. New York: John Wiley & Sons.
  6. 6. Perales E, Martínez-Verdú F, Linhares JM, Nascimento SMC (2010) Number of discernible colors for color-deficient observers estimated from the MacAdam limits. J Opt Soc Am A Opt Image Sci Vis 27: 2106–2114. pmid:20922000
  7. 7. Linhares JMM, Pinto PD, Nascimento SMC (2008) The number of discernible colors perceived by dichromats in natural scenes and the effects of colored lenses. Visual Neurosci 25: 493–499.
  8. 8. Hunt DM, Dulai KS, Bowmaker JK, Mollon JD (1995) The Chemistry of John Dalton's Color-Blindness. Science 267: 984–988. pmid:7863342
  9. 9. Letter from Dalton to Elihu Robinson ddmt, 1794," reproduced separatly and in H. Lonsdale, The Worthies of Cumberland, vol. 5, John Dalton (Routledge, London, 1874).
  10. 10. Baraas RC, Foster DH, Amano K, Nascimento SMC (2010) Color Constancy of Red-Green Dichromats and Anomalous Trichromats. Invest Ophthalmol Vis Sci 51: 2286–2293. pmid:19892868
  11. 11. Baraas RC, Foster DH, Amano K, Nascimento SMC (2004) Protanopic observers show nearly normal color constancy with natural reflectance spectra. Visual Neurosci 21: 347–351.
  12. 12. Rüttiger L, Mayser H, Sérey L, Sharpe LT (2001) The color constancy of the red-green color blind. Col Res Appl 26 (suppl.): S209–S213.
  13. 13. Ma R, Kawamoto K, Shinomori K (2016) Color constancy of color-deficient observers under illuminations defined by individual color discrimination ellipsoids. J Opt Soc Am A Opt Image Sci Vis 33: A283–A299. pmid:26974935
  14. 14. Pearce B, Crichton S, Mackiewicz M, Finlayson GD, Hurlbert A (2014) Chromatic Illumination Discrimination Ability Reveals that Human Colour Constancy Is Optimised for Blue Daylight Illuminations. PLoS One 9: e87989. pmid:24586299
  15. 15. Radonjić A, Pearce B, Aston S, Krieger A, Dubin H, Cottaris NP, et al. (2016) Illumination discrimination in real and simulated scenes. J Vis 16: 2.
  16. 16. Foster DH, Amano K, Nascimento SMC, Foster MJ (2006) Frequency of metamerism in natural scenes. J Opt Soc Am A Opt Image Sci Vis 23: 2359–2372. pmid:16985522
  17. 17. Judd DB, MacAdam DL, Wyszecki G (1964) Spectral distribution of typical daylight as a function of correlated color temperature. J Opt Soc Am A Opt Image Sci Vis 54: 1031–1040.
  18. 18. Liu H, Huang M, Cui G, Luo MR, Melgosa M (2013) Color-difference evaluation for digital images using a categorical judgment method. J Opt Soc Am A Opt Image Sci Vis 30: 616–626. pmid:23595320
  19. 19. Aldaba MA, Linhares JMM, Pinto PD, Nascimento SMC, Amano K, Foster DH (2006) Visual sensitivity to color errors in images of natural scenes. Visual Neurosci 23: 555–559.
  20. 20. Linhares JMM, João CAR, Silva EDG, de Almeida VMN, Santos JLA, Álvaro L, et al. (2016) Assessing the effects of dynamic luminance contrast noise masking on a color discrimination task. J Opt Soc Am A Opt Image Sci Vis 33: A178–A183. pmid:26974922
  21. 21. Ishihara MD (1996) Ishihara’s tests for colour deficiency. Tokyo: Kanehara Trading.
  22. 22. Farnsworth D (1957) The Farnsworth–Munsell 100-Hue test for the examination of color vision. Baltimore, Estados Unidos: Munsell Color Company.
  23. 23. Mollon JD, Regan BC (2000) Cambridge colour test handbook. Cambridge: Cambridge Research Systems.
  24. 24. Barbur J, Rodriguez-Carmona M, Evans S, Milburn N (2009) Minimum color vision requirements for professional flight crew, part 3: recommendations for new color vision standards, DOT/FAA/AM-09/11, June 2009, Final Report. Washington, DC. 20591 20591.
  25. 25. Ripamonti C, Kalwarowsky S, Nardini M (2014) A Universal Colour Discrimination Test suitable for observers with low vision. Invest Ophthalmol Vis Sci 55: 3536–3536.
  26. 26. Jordan G, Mollon JD (1993) The Nagel Anomaloscope and Seasonal-Variation of Color-Vision. Nature 363: 546–549. pmid:8505982
  27. 27. Żychaluk K, Foster DH (2009) Model-free estimation of the psychometric function. Atten Percept Psychophys 71: 1414–1425. pmid:19633355
  28. 28. Bonnardel V, Maloney LT (2000) Daylight, biochrome surfaces, and human chromatic response in the Fourier domain. Journal of the Optical Society of America a-Optics Image Science and Vision 17: 677–686.
  29. 29. Jameson D, Hurvich LM (1978) Dichromatic color language Reds and Greens don't look alike but their colors do. Sens Process 2: 146–155.
  30. 30. Wachtler T, Dohrmann U, Hertel R (2004) Modeling color percepts of dichromats. Vision Res 44: 2843–2855. pmid:15342228
  31. 31. Weiss D, Gegenfurtner KR (2016) A comparison between illuminant discrimination and chromatic detection. Perception 45: 214.
  32. 32. Aston S, Turner J, Le Couteur Bisson T, Jordan G, Hurlbert A (2016) Better colour constancy or worse discrimination? Illumination discrimination in colour anomalous observers. Perception 45: 207.