http://orcid.org/0000-0002-9708-8453
Figures
Abstract
Dairy products exhibit several physical properties that are crucial to define whether we like the food or not: firmness, creaminess, thickness, or lightness. Viscosity changes the flow properties of food and influences the appearance and the consistency of a product; this control variable is important in most production stages—manufacture, processing, and storage. Viscosity of heterogeneous products at a given temperature depends on its composition and physical state of its substances. Although rheology provides a method to access the product viscosity, it lacks non-contact full-field monitoring. We apply a simple correlation analysis of laser speckle images to evaluate viscosity properties of dairy products. Our approach ensures robust measurements with high degree of detectability.
Citation: Postnov DD, Moller F, Sosnovtseva O (2018) Dairy products viscosity estimated by laser speckle correlation. PLoS ONE 13(9): e0203141. https://doi.org/10.1371/journal.pone.0203141
Editor: Guy Cloutier, University of Montreal, CANADA
Received: April 18, 2018; Accepted: August 15, 2018; Published: September 7, 2018
Copyright: © 2018 Postnov et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: Data is available via Dryad repository, DOI: doi:10.5061/dryad.b23dd4r.
Funding: DD Postnov’s work was supported by the grant from Novo Nordisk Foundation (NNF17OC0025224). DuPont Nutrition Biosciences Aps provided support in the form of salaries for FM and providing product samples but did not have any additional role in development of optical method and related analysis, decision to publish, or preparation of the manuscript. The specific roles of these authors are articulated in the ‘author contributions’ section.
Competing interests: F Moller was supported by DuPont Nutrition Biosciences Aps. Financial support includes expenses related to the dairy samples production and publication fee. This does not alter our adherence to PLOS ONE policies on sharing data and materials.
Introduction
We often accept food products on the basis of their texture: How spreadable and creamy a food product is. This affects taste perception [1]. Moreover, products with different viscosity but with similar palatability, macronutrient composition and energy density significantly differs in their intake: a case study in obesity [2]. Main factors—used ingredients, quality of raw material, technological process—can influence rhelogical properties of dairy products. The fat concentration, physico-chemical properties of fat globules and protein content affect viscosity. These compounds can be modified during thermal and mechanical operations that can significantly change rheological characteristics. For these reasons, food rheology is an important quality control tool during and after food manufacture and processing.
The market requires to design new food and beverages that are accepted by consumers. Food industry studies and predicts consumers’ perceptions of food through instrumental measurements [3–6]. There are different rheological tests in the food industry [7, 8]. By applying a controlled force (or strain) and measuring the resulting force (or strain), it is possible to access rheological properties of a material. The rheometer is a research-grade analytical instrument that measures viscous, elastic, and viscoelastic properties of liquids, semisolids, and solids. Capillary viscometers, falling-ball viscometers, rotational and oscillatory rheometers, among others, are used to perform rheological measurements [9]. Dairy products are normally physical homogeneous, but physical or chemical changes (e.g. sedimentation, creaming, wheying off) can occur during storage and limit the shelf life. Some defects can be seen and detected with imaging techniques but viscosity changes due to age gelation or fat crystallization cannot be visualized with traditional visualization techniques.
Over the last decades, development of fast digital acquisition and data processing technologies advanced laser speckle techniques for medical applications in the retina [10], skin [11], mesenterium [12], the kidney [13], and the brain [14]. When coherent light scatters from a medium, it produces a random interference pattern termed speckle pattern. The intensity of speckle patterns fluctuates due to movement of scattering particles in the medium. This leads to a blurring of the speckle pattern, to a reduction in the local speckle contrast and, thus, to a coding velocity distribution.
Recently, Hajjarian and Nadkarni [15, 16] nailed a new approach—laser speckle rheology—to assess tissue viscoelasticity by measuring the time constant of fluctuations of laser speckle intensity. Speckle fluctuations are highly sensitive to Brownian movement of scattering particles; they are influenced by the viscoelasticity of the medium and are analyzed by means of the speckle intensity autocorrelation curves.
We applied a simple correlation analysis of laser speckle images to evaluate viscosity properties of dairy products without direct contact and modifications of the medium. The advantages of the suggested approach over traditional methods include minimal sample preparation, contact-free assessment, fast acquisition time, and simultaneous characterization of rheological properties as well as physical defects.
Materials and methods
Imaging
Dairy product samples were provided by DuPont Nutrition Biosciences Aps, Denmark. The samples were produced by a combination of 38% fat cream, skimmed milk and viscosity increasing agent CREMODAN® 719 at different concentrations. Cremodan® 719 is a blend of food-grade stabilisers of hydrocolloids (E412, E415, E407) in the powder form. The hydrocolloids increases viscosity with increasing concentrations. In the used levels they should also prevent protein aggregation and resulting sedimentation. The final set consisted of 27 samples with 0.2, 1.95, 3.7% of fat and 0.000, 0.015, 0.03, 0.045, 0.06, 0.075, 0.09, 0.105, 0.12% of CREMODAN® 719.
The laser module LDM785 controlled by the diode driver Thorlabs CLD1011LP delivered coherent infrared light to the sample; the laser power density was about 20 mW/cm2 [17]. Back-scattered light was collected by CMOS camera Basler acA2000-165umNIR that operated at a rate of 400 (low frequency LF mode) or 2000 (high frequency HF mode) frames per second. In the LF mode, an image of 400 × 200 pixels was recorded with 2 ms of exposure time; in the HF mode, an image of 400 × 25 pixels was recorded with 0.5 ms of exposure time. To deliver light to the camera, VZM™ 1000i lens (Edmund Optics) were used at 10x magnification. The field of view and focal distance remained the same during experiments. Temperature of the samples and in the room was kept constant at about 22 °C.
Three imaging sessions were performed in LF mode and one session in HF mode. The samples were selected randomly. Each recording lasted for one minute; the first 10 seconds were removed from the analysis as a transient period.
The samples were analysed using a Physica MCR 301 rheometer (Anton Paar, Austria) and a DG26.7 double gab geometry. A standard viscosity profile was made starting at a shear rate of 0.1 s−1 and increasing to 200 s−1 using a logarithmic ramp. 25 points were recorded using a fixed measuring duration of 20 s pr. point. The samples were stored at refrigerated temperature (app. 5 °C) and tempered at 10 °C in the measuring system for 5 minutes before measurements. The analyses were performed at 20 °C. The measured data were fitted to the linear model and shear viscosity μ was extracted assuming that samples are Newtonian fluid at low fat and CREMODAN® 719 concentrations. R-squared was used as a statistical measure of how close the data are to the fitted regression line.
Data analysis
Scattering particles—fat globules or large proteins—create a speckle pattern that changes due to Brownian motion (Fig 1). Speed of particles and, thus, change of the speckle pattern are mainly defined by temperature, particle size, and medium viscosity. At constant temperature, particle size remained the same in the samples with the same fat concentration; in the samples with different CREMODAN® 719 concentrations particle speed was defined only by medium viscosity. To estimate viscosity variations by means of laser speckle imaging, we suggested two approaches.
Two consecutive frames for a sample with 3.7% of fat and 0.12% of CREMODAN® 719. Color codes intensity of scattered light. Black circles mark exemplary regions where the speckle pattern remains unchanged and, thus, increases correlation.
Correlation time.
The first approach is based on the analysis of intensity autocorrelation function for speckle dynamics [14, 18]:
(1)
where m, n are pixel indexes, I is speckle intensity, t is time corresponding to the first frame, and τ is a time lag. g(2) was calculated for samples over 100 time points and 50 lags. In the absence of static scattering g(2) is related to the field temporal autocorrelation function g(1) [14] as
(2)
where β accounts for loss of correlation related to the speckle size and light source properties.
(3)
where n takes values of 0.5, 1 or 2 depending on the scattering regime and the motion properties [19]. Correlation time τc is a key parameter in laser speckle theory; it is inversely proportional to the speed of scattering particles [14, 20]. We estimate correlation time by substituting τ with τc and 0 in Eqs 2 and 3 and numerically solving the following equation with respect to τc:
(4)
where e is mathematical constant approximately equal to 2.718. As correlation time inversely proportional to the particle speed, we expect that it will increase with larger viscosity which is known to decrease particles speed in Brownian motion.
Frames correlation.
The second approach is based on 2-dimensional linear correlation between frames:
(5)
where
are mean intensities of corresponding frames. Similar to the Pearson correlation coefficient, C(t, τ) shows degree of linear correlation and is equal to 1 if I(t) and I(t + τ) are linearly related and to 0 if there is no correlation. Since motion of particles causes random changes in speckle pattern, correlation reflects relative number of particles moved between two frames. This metric depends on the time between frames τ. If it is too long, the frames become independent of each other; if it is too short, there might be not enough motion to change the speckle pattern. For recordings in LF mode, we used only consecutive frames, thus, τ was fixed at the value of 2.5 ms. For recordings in HF mode the time lag τ was varied from 0.5 ms to 25 ms to obtain linear correlation curves similar to g(2). The linear correlation was calculated for all possible pairs of frames in each recording. Values above and below one standard deviation from the median of the linear correlation were rejected to avoid imaging artifacts such as skipped frames. Remaining values were averaged to provide a reliable estimation of linear correlation. Resulting average takes values from 0 to 1 (negative linear correlation is unlikely for random changes of the speckle pattern): 0 corresponds to high particles mobility (low viscosity) and 1 to low particles mobility (high viscosity). We call it viscosity index:
(6)
where Mτ and στ are median value and standard deviation for all correlation coefficients calculated at the selected τ. Cτ(|Cτ(i) − Mτ| < |Mτ − στ|) denotes all correlation coefficients Cτ at τ that satisfy this filtering conditions. Viscosity indexes calculated from data at LF mode were analyzed for significant difference between samples with different CREMODAN® 719 concentrations. Unlike correlation time (Eq 4), the linear frame correlation (Eq 5) does not directly depend on particle speed, but shows stability degree of speckle pattern that is linked to particle mobility.
Robustness analysis.
We used Student’s test for independent samples to detect a minimal difference in CREMODAN® 719 concentrations with 95% confidence. To estimate robustness of the identified changes we calculated detectability index [17]:
(7)
where
and σv are mean and standard deviation of an analyzed variable. c1 or c2 are CREMODAN® 719 concentrations to be compared. Analyzed variable can be either τc (Eq 4) or V (Eq 6).
Results
Fig 2 depicts correlation time and viscosity indexes calculated for the data recorded in LF mode. CREMODAN® 719 increases viscosity of dairy products: the larger concentration of CREMODAN® 719, the stronger correlation between the frames, longer correlation time (A), and higher viscosity index (B). Variations of the correlation time within the same sample increase with increasing CREMODAN® 719 concentration while curves are well separated for different fat concentrations. Variations of the viscosity index are low and decrease with increasing fat concentration. Increasing fat concentration results in increased number of large, slow moving particles; this makes viscosity estimation more precise and robust.
Correlation time τc (A) and viscosity index V (B) calculated for all samples in LF mode. Both characteristics increase with increasing CREMODAN® 719. This is related to the rise of viscosity.
We introduced detectability index (Eq 7) to evaluate how reliable detected differences are. Table 1 compares detectability index for τc (Eq 4) or V (Eq 6) for all CREMODAN® 719 concentrations. One can see that Dv tends to increase with increasing both fat and CREMODAN® 719 concentrations; such increase is observed in 81% and 71% of compared pairs, respectively. demonstrates similar behavior with increasing fat concentration (75% of compared pairs) but does not show steady improvement with increase of CREMODAN® 719 concentration (48% of compared pairs). This indicates that autocorrelation function g(2) (Eq 1) is more vulnerable to acquisition noise.
It estimates reliable differences that the proposed approaches can distinguish.
To estimate robustness and precision of the method, we calculated confidence at which one can distinguish different CREMODAN® 719 concentrations by means of correlation time and viscosity index (Fig 3). In most cases variations are low enough to assess 0.015% changes in CREMODAN® 719 concentration with 95% confidence. The most difficult case is to make precise estimations at low concentration of fat and CREMODAN® 719 (left panel). This limitation is related to the fast movements and low number of large particles.
Color codes confidence with which different CREMODAN® 719 concentrations can be distinguished in the samples with the same fat concentration. Confidence was calculated on the basis of Student’s t-test for τc (top panel) and V (bottom panel). Dark red and magenta colors correspond to the confidence above 95%. Viscosity index allows for 95% confidence detection in a wider range of concentrations.
To validate the method we compared viscosity estimated from laser speckle measurements with shear viscosity. Shear viscosity μ was obtained by linear fitting of shear stress (measured by rheometer) to shear rate (Fig 4A). Shear viscosity was measured for samples with 0.2 and 3.7% fat concentrations and 0.000, 0.03, 0.06, 0.09, 0.12% CREMODAN® 719 concentrations. Pearson correlation coefficient between μ and τc was 0.9856 and 0.9947 at 0.2% and 3.7% fat concentrations, respectively; for viscosity index V they were 0.9975 and 0.9716. This points to almost linear relation between laser speckle and traditional rheology measurements (Fig 4B and 4C). Non-linear dependency between shear viscosity and laser speckle measurements is expected at higher values of fat or CREMODAN® 719 concentrations as non-Newtonian properties of the dairy product are more pronounced (Fig 4A).
(A) Shear viscosity μ obtained by a linear fit of rheometery measurements (left axis) and R2 goodness of fit (right axis). With increasing CREMODAN® 719 and fat concentrations the fit quality decreases because of non-Newtonian properties of the diary product. τc (B) and V (C) as functions of μ show almost linear correlation—particularly for low-fat samples. Solid lines correspond to 0.2% fat concentration, dashed lines to 3.7%.
Correlation time τc is one of the parameters that define the shape of autocorrelation curve g(2). Correlaion time corresponds to a specific time lag ((Eq 4)) while viscosity index V depends on time lag (sampling frequency). To show how V changes for different sampling frequencies and how well τc describes the shape of g(2), we used the data obtained in HF mode. Fig 5 represents corresponding correlation curves. Both g(2) and V reach their minimum around a time lag τ of 5–10 ms. This implies that a sampling frequency below 200 frames per second can not capture observed variations of viscosity; the consecutive frames are not correlated. A better separation of samples is possible if the correlation is close to one; this will require much higher frame rate (about 20000 frames per second), higher laser power and low signal-to-noise ratio. Another observation is that the form of curves slightly varies for different CREMODAN® 719 concentrations (e.g, some curves cross each other). In such cases τc or V are not sufficient to estimate viscosity. But this effect is mainly determined by the presence of noise; longer recordings or appropriate method to compensate the acquisition noise could solve the problem.
Autocorrelation g(2) (top panel) and viscosity index V (bottom panel) versus time lag. Time lag is defined as a delay between frames. Color codes CREMODAN® 719 concentrations. Although curves have slightly different forms, they reach minimum within 5–10 ms.
Conclusion
We showed that variations of dairy product viscosity can be estimated by simple laser speckle analysis—without special high frequency cameras and frequency response analysis. To estimate viscosity we suggested two approaches:
- Estimation of correlation time τc (Eq 4) from speckle autocorrelation function (Eq 1) gives linear relation to viscosity for Newtonian liquids;
- Estimation of viscosity index V (Eq 6) from frame-to-frame linear correlation (Eq 5) evaluates a degree of stability of speckle patterns that is related to particle mobility.
Correlation analysis of laser speckle data is sufficient for robust measurements of viscosity variations; it detects 0.015% changes in CREMODAN® 719 concentration with 95% confidence in most cases (44% for 0.2% fat concentration, 88% for 1.95% and 3.7% fat concentrations). Precision of the method rises with increasing fat concentration of the product.
We should mention several benefits of frame-to-frame linear correlation versus speckle autocorrelation: (i) computational implementation is simpler and less time consuming, (ii) its value does not dependent on the speckle contrast, and (iii) it is less vulnerable to acquisition noise and temporal artifacts. This results in better separation of viscosity variations. Simple modification of experimental protocol—increasing length of recording or imaging speed—can significantly improve detectability of viscosity changes.
Robustness of the results and reliable separation of samples with respect to CREMODAN® 719 and fat concentrations may allow for mapping viscosity index to the absolute values and for applying the method to a wide range of products. Simple speckle correlation analysis opens perspectives to monitor structural and physical changes of food products during manufacture and storage.
Acknowledgments
D.D.P. was supported by grant NNF17OC0025224 awarded by Novo Nordisk Foundation, Denmark.
References
- 1. Zahn S, Hoppert K, Ullrich F, Rohm H. Dairy-based emulsions: Viscosity affects fat difference thresholds and sweetness perception. Foods. 2013; 2(4):521–33. pmid:28239135
- 2. Zijlstra N, Mars M, de Wijk RA, Westerterp-Plantenga MS, de Graaf C. The effect of viscosity on ad libitum food intake. Int. J. Obes. (Lond). 2008; 32(4):676–83.
- 3. González-Tomás L, Costell E. Relation Between Consumers’ Perceptions of Color and Texture of Dairy Desserts and Instrumental Measurements Using a Generalized Procrustes Analysis. J. Dairy Sci. 2006; 89(12):4511–9. pmid:17106081
- 4. McCarthy KL, McCarthy MJ. Relationship between In-line Viscosity and Bostwick Measurement during Ketchup production. Journal of food science. 2009; 74(6):E291–7. pmid:19723191
- 5. Ares G, Budelli E, Bruzzone F, Gimenez AN, Lema P. Consumers’ texture perception of milk desserts. I-relationship with rheological measurements. Journal of texture studies. 2012; 43(3):203–13.
- 6. Stokes JR, Boehm MW, Baier SK. Oral processing, texture and mouthfeel: From rheology to tribology and beyond Curr. Opin. Colloid Interface Sci. 2013; 18(4):349–359.
- 7.
Steffe JF. Rheological Methods in Food Process Engineering, second edition. Freeman Press, East Lansing, MI, USA; 1996.
- 8. Melito HS, Daubert CR. Rheological innovations for characterizing food material properties. Annual Rev Food Sci Technol. 2011;2:153–79.
- 9. Tabilo-Munizaga G, Barbosa-Cánovas GV. Rheology for the food industry. J. Food Engineering 2005;67:147–156.
- 10. Srienc AI, Kurth-Nelson ZL, Newman EA. Imaging retinal blood flow with laser speckle flowmetry. Front. Neuroenergetics. 2010; 2(128):1–10.
- 11. Mahe G, Humeau-Heurtier A, Durand S, Leftheriotis G, Abraham P. Assessment of skin microvascular function and dysfunction with laser speckle contrast imaging. Circulation: Cardiovascular Imaging. 2012; 5:155–163. pmid:22253335
- 12. Nyvad J, Mazur A, Postnov DD, Straarup MS, Soendergaard AM, Staehr C, et al. Intravital investigation of rat mesenteric small artery tone and blood flow. The Journal of physiology. 2017. https://doi.org/10.1113/JP274604 pmid:28568894
- 13. Postnov DD, Holstein-Rathlou NH, Sosnovtseva O. Laser speckle imaging of intra organ drug distribution. Biomedical optics express. 2015; 6(12):5055–62. pmid:26713217
- 14. Boas DA, Dunn AK. Laser speckle contrast imaging in biomedical optics. J Biomed Opt. 2010; 15(1):011109. pmid:20210435
- 15. Hajjarian Z, Nadkarni SK. Evaluating the Viscoelastic Properties of Tissue from Laser Speckle Fluctuations. Scientific Reports. 2012; 2–316.
- 16. Hajjarian Z, Nadkarni SK. Evaluation and Correction for Optical Scattering Variations in Laser Speckle Rheology of Biological Fluids. PLoS One. 2013; 8(5):e65014. pmid:23705028
- 17. Postnov DD, Sosnovtseva O, Tuchin VV. Improved detectability of microcirculatory dynamics by laser speckle flowmetry. Journal of biophotonics. 2015; 8(10):790–794. pmid:26110702
- 18. Hajjarian Z, Nia HT, Ahn S, Grodzinsky AJ, Jain RK, Nadkarni SK. Laser Speckle Rheology for evaluating the viscoelastic properties of hydrogel scaffolds. Scientific reports. 2016;6:37949. pmid:27905494
- 19. Davis MA, Gagnon L, Boas DA, Dunn AK. Sensitivity of laser speckle contrast imaging to flow perturbations in the cortex. Biomedical optics express. 2016; 7(3):759–75. pmid:27231587
- 20. Duncan DD, Kirkpatrick SJ. Can laser speckle flowmetry be made a quantitative tool?. JOSA A. 2008; 25(8):2088–94. pmid:18677371